Post Buy Requirement
Shree Bhagwati Machtech India Pvt Ltd.
Ahmedabad, Gujarat, India
gstGST : 24AANCS9768F1ZQ Add Review

Our Products

  1. Storage Drums, Tanks & Containers 3 Products available
  2. Dryers 4 Products available
  3. Cleaning Machines & Equipments 5 Products available
  4. Chemical Reactors & Process Tanks 3 Products available
  5. Filling Line 107 Products available
  6. Kitchen Appliances 4 Products available
  7. Labeling Machine 3 Products available
  8. Marking & Stamping Machines 18 Products available
  9. Sealing & Strapping Machines 5 Products available
  10. Seal Machines 5 Products available
  11. Others 95 Products available

Other Products / Services

Fluid Bed Top Spray Granulation

Granulation

Granulation is one of the most important unit operations in the production of pharmaceutical oral dosage forms. However, there are many different technologies each having different strengths and weaknesses.



  • Granulation is often required to improve the flow of powder mixtures and mechanical properties of tablets.

  • Granules are usually obtained by adding liquids binder or solvent solutions.

  • Larger quantities of granulating liquid produce a narrower particle size range and coarser and harder granules, i.e. the proportion of fine granulate particles decreases.

  • The optimal quantity of liquid needed to get a given particle size should be known in order to keep a batch-to-batch variations to a minimum.

  • Wet granulation is used to improve flow, compressibility, bio-availability, homogeneity, electrostatic properties, and stability of solid dosage forms.

  • The particle size of granulate is determined by the quantity and feeding rate of granulating liquid.

  • Wet granulation is used to improve flow, compressibility, bio-availability, and homogeneity of low dose blends, electrostatic properties of powders, and stability of dosage forms.

  • Granulator process solutions involve smaller particles adhering to each other in order to grow larger particles or agglomerates.

  • Particle size is critical in a granulator process solution because if the particles are too large or too small they do not have the product characteristics important to produce light powders into high density free-flowing granulates.

  • There are many variables in controlling a granulator process, ranging from feed rate of the granulator liquid to the resonance time of the granulator chamber. All of these parameters affect the particle size in different ways.

  • With an on-line sensor, the particle size is measured instantaneously and continuously in real time helping to monitor and control the granulator process.


Granulation methods:



  • Fluid Bed Top Spray Granulation

  • High Shear Granulation


Fluid Bed Top Spray Granulation


The fluid bed granulation process also known as agglomeration involves suspending particulates in an air stream and spraying aliquid from the top down onto the fluidized bed. Particles in the path of the spray get slightly wetted and become tacky. The tacky particles collide with other particles and adhere to them to form a granule.


Granulation can be performed using fluid beds fitted with spray nozzles. It is possible to have completely closed material handling by a closed linking with upstream and downstream equipment. Also, fully automatic cleaning in fluid beds using stainless steel filters now compares favorably with what is possible in a single pot. There are two different modes of fluid bed granulating:


Dry Stage:In Dry stage granulation, the particles only require a slight wetting to become tacky and stick to each other. The granulating solution is applied at a rate less than or equal to the evaporation rate. Thus the particles remain "dry" through the entire process.


Wet Stage:In Wet stage granulation, the particles require significant wetting before they become tacky enough to stick to each other. The granulating solution is applied at a rate higher than the evaporation rate until the particles build up enough moisture to granulate. The characteristics of the particles when wet and the type of granulating solution being used will determine which mode of granulating is most appropriate. While Dry stage is more common, Wet stage granulating allows for denser products.


View Complete Details

Cosmetic Processing Machinery

The cosmetic industry has items such as lotions, creams, oils and powders that are used as beauty and medical solutions. A liquid filling machine that is best suited for this industry must be able to handle the sticky substances which are normally viscous in nature. A powder filling machines will enable the flour-like substances to be carefully placed into the respective containers without losing the light contents that are easily blown away by wind currents.
The breweries industry will mostly require need the liquid filling machine technologies to fill up the bottles with the desired drink for consumption. The machine must insert the liquid
View Complete Details

Automatic Air Jet Cleaning Machine Inbuilt Unscrambler Of 30 Dia

Shree BHagwati Pharma Machinery Automatic Air Jet Cleaning Machine inbuilt Unscrambler of 30 Dia. is a compact unit used for cleaning of Dry Syrup bottles before filling.





This machine works on a principle of back pressure of Bottle which will be fed by the unscrambler to reach separator assembly, which transfer the Bottle on conveyor belt and pushes bottle to the cleaning section one after another. Machine consist of two inverters and one cleaning section. Bottle will be pushed by rotating separator towards the infeed inverter, which makes the Bottle in the wrong direction and push it to cleaning section through back pressure of other Bottle. Cleaning section is equipped with continuous vacuum system. Bottle reaches to the cleaning section, a pair of nozzle starts to flush the air inside the neck of the Bottle and simultaneously vacuum will suck the particle, disturbed by the air. Then Bottle passes to another inverter, where changes the direction to the right direction, further Bottle moves either to the filling machine.





View Complete Details

Automatic Six Head Bottle Air Jet Cleaning Machine

BHAGWATIs Automatic Vertical Air Jet Cleaning Machine work on positive air pressure & vacuum cleaning. The unit is made compact, versatile and enclosed in stainless steel elegantly matt finish body, consists of S.S. Slat Conveyor & Reciprocating cleaning nozzles. No container No cleaning system arrangement is standard features of the machine.


The main drive of the machine and conveyor drive consist of A/c Motor with synchronized variable A/c Frequency Drive.



Automatic Vertical Air Jet Cleaning Machine can accomplish a task by a photoelectric system, all the bottle should be cleaned before being filled, when an empty bottle arrives at the specified position, a cleaner comes down automatically until at the mouth of the bottle, then pure air is pressed into the bottle, and the impurity inside of the bottle is removed by vacuum system. This product conforms to the requirements of GMP completely.

View Complete Details

Checkweigher, Online Checkweighing Machine, Check Weighing Machine

It is suitable to check weight of various product, over or less weight will be rejected out, qualify bags will be passed to next equipment.



Bhagwati Automatic Checkweigher / Check Weigher Machine is most suitable for online checkweighing machine of Cartons, Packet, Bottles, Pouches it is suitable for foods & Pharma Industries you know many same machines different name using like Check Weigher Conveying , Check Weigher , Flour Packing Check Weigher Big , Check Weigher Food bottle and boxes, Check Weigher Bottle and Jar , Carton Check Weigher Checkweighing Manufacturers , Bottle and Jar, Pouch , carton , box Check Weigher Manufacturers , Conveying with Check Weighing Machine Manufacturers , Flour Packing Check Weigher Manufacturers Big Size Packing Check Weigher Manufacturers , Food Check Weigher Manufacturers , Bottle Check Weigher Manufacturers India and UK, UAE Checkweighing Manufacturers , Check Weight Machine , Weight Check System.



Checkweigher is Bhagwati low cost, economical solution for fast, accurate checkweighing applications. Its simplified, modular design offers the ruggedness and durability for demanding production environments at significant savings, with no compromise in accuracy or weighing reliability.

View Complete Details

Ablet/Capsule Counting


  • Feed bin

  • Bin stopper

  • Vibrato part(contain glass cover)

  • Test part(contain track )

  • Memory door

  • Funnel

  • Blanking shield system

  • Flow track and filling part

  • Laking bottle detection electric eye

  • Stop bottle gate system

  • Probelm one collection zone

  • Trcack electric eye

  • Track convey bottle part





The feed container moving on conveyor belt are feed into an in feed star wheel through In-feed worm, star wheel bringing the container below the sealing head in the subsequent indexing part, mean while the bottle pickup a cap from the delivery chute of cap filling bowl, where the body and the neck of the container are positioned below the rotating head, where the sealing head is performing perfect operation of threading & sealing.




View Complete Details

Cotton Inserting Machine GMP

  • Bottle Diameter Up to 125mm* and other shape on request
  • Bottle Height Up to 225mm*
  • Out/put 100 Bottles / min
  • Power Consumption 1  Kw
  • Power Supply A/C 220V/50Hz

Cotton inserting machine can automatically cut and insert cotton into containers quickly and accurately. The machine is designed with a programmable logic controller (PLC) and novel high precision electronic positioning system. It features variable frequency control of mainframe speed. It possesses many protective functions. For example, it will automatically stop when bottle or cotton is absent or bottles are jammed. The product is well up to GMP requirements.



Technical Specification


View Complete Details

Automatic Single Head Screw Capping Machine GMP Model

Automatic Screw Capping Machine is versatile, self-supported on stainless steel leg with height adjustable adjustment system. The machine is precision built on sturdy welded steel frame completely enclose in stainless steel sheet and doors are providing to facilitate the servicing of machine.



The feed container moving on conveyor belt are feed into an in-feed star wheel, bringing the container below the sealing head in the subsequent indexing part, mean while the rotating head pickup a cap from the cap star wheel which is receiving from delivery chute of cap filling bowl, where the body and the neck of the container are positioned below the rotating head, where the sealing head is performing perfect operation of sealing, rotating head is design to seal container according to pre-set torque.

View Complete Details

Cotton Inserting Machine GMP Model

  • Bottle Diameter Up to 125mm* and other shape on request
  • Bottle Height Up to 225mm*
  • Out/put 50 Bottles / min
  • Power Consumption 1  Kw
  • Power Supply A/C 220V/50Hz

Cotton inserting machine can automatically cut and insert cotton into containers quickly and accurately. The machine is designed with a programmable logic controller (PLC) and novel high precision electronic positioning system. It features variable frequency control of mainframe speed. It possesses many protective functions. For example, it will automatically stop when bottle or cotton is absent or bottles are jammed. The product is well up to GMP requirements



Technical Specification
View Complete Details

Automatic Tablet Counting Machine

  • Capacity Max. 6, 000 pcs/min for Ø5mm Tablet
  • Container Size Range Diameter: Ø25-Ø100 mm Hight:max 220 mm
  • Power Supply AC 220V, 1 PHASE, 50/60 Hz, 1, 300W
  • Air Consumption 10 kg/cm, 200 litters/min
  • Machine Size 180x95x190 cm (Without conveyor)
  • Packing Size 220x125x210 cm(Without conveyor)
  • Net Weight 800 Kgs
  • Gross Weight 1100 Kgs

Bhagwati tablet counting and filling machine adopts advanced vibration and multi-channel feeder, computer control, dynamic scan counting, transfer the bottle automatically, system test automatically. The machine With Stop automatically function and other advanced technology. This machine designed with GMP standard. Compose the light, electric machinery to one set, which is suitable for tablet or capsule counting and filling in pharmaceutical or food business.



Technical Specification of Tablet Counting And Filling Machine
View Complete Details

Semi Automatic Suppository Production Line

Instruction and description




  • Operating principle:



  • Specification and Main Parameters of Suppository Filling Machine:

Model Unit SB-U-15 Automatic Suppository Filling Machine
Capacity PCS/Hour 18000-23000 (depending on producing)
Total Power KW 7.5Kw
Voltage, frequency V 3PH 380 +/-10% 50Hz
Dose per unit ML 0.5~5 (depending on product)
Deviation % ï¼±2
Suppository shape N/A Bullet, torpedo, duck-mouth ect (depending on product)
Adapting N/A Fatty acid glycerin,gelatin,glycol,etc., (depending on product)
Volume L 50
Air pressure Mpa More than 0.6
Air consumption m3 1.5
Water consumption N/A 50kg per circle
Total weight KG 2600
Machine dimensions MM SB-U: 4000*3500*2000mm
View Complete Details

Automatic Injectable Dry Powder Filling With Pick

  • Accuracy ±1% depending upon consistency and the uniformity of bulk density of injectable powder, under controlled level of humidity (i.e.25%)
  • Power Requirement 440 Volts, 3 Phase (4 wire System) 50 Hz
  • Dimensions 4350 MM (L) X 1200 MM (W) X 1660 MM (H)
  • Direction Left to Right
  • Production Rate Up to 240 fills / min for Single DoseUp to 120 Fills / Min for Double DoseUp to 80 Fills / Min for Triple DoseUp to 60 Fills / Min for Four Dose
  • Fill Capacity 50 Mg to 1.5 Grms. Single Dose (With Change Parts), 1.5 Grms to 6 grms. Double, Triple and Four Dose. Fill range depending upon vial opening and bulk density of injectable powder
  • Electrical Supply 1.5 HP For Main Drive.0.50 HP For Unscrambler0.50 HP For Scrambler.
  • Height of conveyor Adjustable from 800 to 850 MM
  • Net Weight 1250 KGS. (Approx.)
  • Gross Weight 1450 KGS. (Approx.)
We are leading supplier of this product.
View Complete Details

Automatic High Speed Injectable Dry Powder Filling With Pick

  • Accuracy ±1% depending upon consistency and the uniformity of bulk density of injectable powder, under controlled level of humidity (i.e.25%)
  • Power Requirement 440 Volts, 3 Phase (4 wire System) 50 Hz
  • Dimensions 4350 MM (L) X 1200 MM (W) X 1660 MM (H)
  • Direction Left to Right
  • Production Rate Up to 240 fills / min for Single DoseUp to 120 Fills / Min for Double DoseUp to 80 Fills / Min for Triple DoseUp to 60 Fills / Min for Four Dose
  • Fill Capacity 50 Mg to 1.5 Grms. Single Dose (With Change Parts), 1.5 Grms to 6 grms. Double, Triple and Four Dose. Fill range depending upon vial opening and bulk density of injectable powder
  • Electrical Supply 1.5 HP For Main Drive.0.50 HP For Unscrambler0.50 HP For Scrambler.
  • Height of conveyor Adjustable from 800 to 850 MM
  • Net Weight 1250 KGS. (Approx.)
  • Gross Weight 1450 KGS. (Approx.)
We are leading supplier of this product.
View Complete Details

Dry Powder Filling With Pick

  • Accuracy ±1% depending upon consistency and the uniformity of bulk density of injectable powder, under controlled level of humidity (i.e.25%)
  • Power Requirement 440 Volts, 3 Phase (4 wire System) 50 Hz
  • Dimensions 3028 MM (L) X 1093 MM (W) X 1885 MM (H)
  • Direction Left to Right
  • Production Rate Up to 120 fills / Min for Single DoseUp to 60 fills / Min for Double DoseUp to 40 fills / Min for Triple DoseUp to 30 fills / Min for Four Dose
  • Fill Capacity 50 Mg to 1.5 Grms. Single Dose (With Change Parts), 1.5 Grms to 6 grms. Double, Triple and Four Dose. Fill range depending upon vial opening and bulk density of injectable powder
  • Electrical Supply 1.5 HP For Main Drive.0.50 HP For Unscrambler0.50 HP For Scrambler.
  • Height of conveyor Adjustable from 800 to 850 MM
  • Net Weight 800 Kgs. (Approx.)
  • Gross Weight 1200 Kgs. (Approx.)
Technical Specification of Injectable Dry Powder Filling Machine

View Complete Details

Automatic Auger Type Dry Syrup Powder Filler Machine

Automatic Auger Type Dry Syrup Powder Filling Machine is a compact model used for filling Dry Syrup Powder in bottles.


The incoming dry bottle sterilized is fed through the in feed Turn Table with suitably guided on the moving delrin flat conveyor belt at the required speed for feeding. There are two separate filling head mounted on machine top plate in the same line. When bottle reaches to the first filling station, it will be held by the pneumatic bottle holder. Immediately it will be sensed by the bottle sensor as soon as it gets signals from sensor magnetic clutch starts to rotate which is mounted on auger shaft. It will fill the desired amount of powder to the bottle through auger, where rotation time is previously saved in PLC control. After filling of first bottle pneumatic piston goes back and release the first bottle to move on conveyor, By the same time second bottle also moves along with the first bottle in empty condition. In second filling head same operation will be performed but this time second bottle get filled and first bottle moves further for next operation. The main advantage of this machine is Pneumatic bottle holding system is directly connected with Auger rotation, so till bottle get filled with powder as per set value pneumatic system will not going to release the bottle.




Technical Specifications of Auger Type Dry Syrup Powder Filling Machine

Model SBAF-60 SBAF-D-100
Direction Left To Right. Left To Right.
Production Rate Up to 30 to 40 Bottles / Min Up to 60 to 80 Bottles / Min.
Fill Capacity 10 grms to 50 grms. (with different set of Auger and funnel) Fill range depending upon Bottle opening and bulk density of powder. 10 grms to 50 grms. (with different set of Auger and funnel) Fill range depending upon Bottle opening and bulk density of powder.
Accuracy ± 2% depending upon consistency and the Uniformity of bulk density of powder under controlled level of Humidity (i.e.35%) ± 2% depending upon consistency and the Uniformity of bulk density of powder under controlled level of Humidity (i.e.35%)
No. of Heads Single Two
Electrical Supply 1.00 HP For Main Drive. 0.25 HP for conveyor 2.00 HP For Main Drive. 0.25 HP for conveyor
Power Requirement 440 Volts, 3 Phase (4 wire System) 50 Hz. 440 Volts, 3 Phase (4 wire System) 50 Hz.
Height of Conveyor Adjustable from 850 To 900 mm Adjustable from 850 To 900 mm
Dimensions 1524 mm (L) X 1105 mm(W) X 1800 mm (H) 2200 mm (L) X 1102 mm (W) X 1817 mm (H)
Net Weight 400 KGS. (Approx.) 550 KGS. (Approx.)
Gross Weight 600 KGS. (Approx.) 800 KGS. (Approx.)
Bottle Diameter 25 mmTo 70 mm MAX. 25 mm To 70 mm MAX.
Height 55 mm To 110 mm. 55 mm To 110 mm.
Pneumatic Air Filtered, oil free, sterile low pressure AIR at 5 kg / cm2 Filtered, oil free, sterile low pressure AIR at 6 kg / cm2
View Complete Details

Jacketed Hose

  • APPLICATION For Blending, Heating & Cooling
  • CONSTRUCTION Vertical, Cylindrical, Top & Bottom Dished End Jacketed, Insulation, Agitation, Leg Supports
  • CAPACITY From 100 Liters To 10000 Liters
  • MOC Contact Parts S.S.316, S, S, 3161 Jacket, M.S., S, S, 304
  • FINISH 220 Grit lnside & 150 Grit Outside
  • DESIGN Internal, Atm, External: 3 Bar @ 150°
  • AGITATOR Propeller, 6 Bladed Turbine, Off Center With Single Baffle Or Nil
  • RPM & SEAL 500, 750, 1440, Stuffing Box Or Mech. Seal with Cooling Pot
  • SPEClAL FEATURE Low Power Consumption No Coupling Inside Or Outside Top Cover welded Or Bolted with
  • ACCESSORIES Spray Ball Thermowell with Dial Gauge Safety valve Pressure Gauge On Steam Inlet Connection Level Indicator
Master Plant, Master Plant Mixing System

Bhagwati Pharma is one of the most experienced storage vessel fabricator for biopharmaceutical and pharmaceutical industries in India. Our storage containers accurately maintain the temperature of the material inside it. Our skilled professionals are dedicated for building and finishing stainless steel mixing tank. We have wide range of SS containers in both Jacket and Plain form. Our jacket stainless steel mixer maintains the heating and cooling of material in it.Bhagwati Pharma provides high quality stainless steel tank with accurate result at very affordable price.



  • Chemical Industry:

  • Cleaning agents

  • Polishing agents

  • Lubricants

  • Colors

  • Lacquers

  • Anti-corrosion products>

  • Wax emulsions

  • Silicone emulsions

  • TiO2-suspensions

  • Colloidal suspensions

  • Impregnating agents

  • Pesticides

  • Fungicides

  • Pharmaceuticals:

  • Ointments

  • Gels

  • Cough syrups

  • Infusion solutions

  • Suppository masses

  • Coatings

  • Lotions (W/O or O/W)

  • Paraffin emulsions

  • Lipid emulsions

  • Disintegration of

  • vegetable substances

  • Antiseptics

  • Serums

  • Vaccines

View Complete Details

Storage Tanks

The Storage Tanks and Jacketed Vessels manufactured by us Shree Bhagwati Machtech (India) Pvt. Ltd are capable of satisfying your specific requirements. We also build storage vessels with customized designs and our tanks are available in diverse sizes with various storage capacities. Our storage tanks have a capacity of storing almost 100 to 25000 liters of liquid.



Storage Tanks and Jacketed Vessels are used to manufacture or store high quality liquids and solutions required by different industries like Pharmaceuticals, Chemical and Cosmetics etc. It can be provided either jacketed or non-jacketed versions. It can be also available in electric and steam heated versions. The storage tanks and jacketed vessels can be designed in different rage like, 100, LTR TO 25000 ltrs in any shape and size as per clients requirements.



  • Plain storage tanks with loose top lid & either flat of dished bottom

  • Manufacturing vessels with agitators

  • Reactors

  • Vessels under vacuum / without vacuums.

  • Jacketed vessels and tanks.

  • Vessels and tanks with limped coils etc

  • Horizantal, capsule shaped, etc tanks available.


The storage tanks and jacketed vessels, specially used in the pharmaceutical indutry, can either be horizontal or vertical in their orientation. Horizontal storage vessel is generally mounted on stands or saddles and have an access port either at the bottom or at the top. Vertical storage tanks are erected vertically and have access ports at bottom. These specialized tanks can either be placed above or underground, depending on the construction of the storage facility. The thickness of wall of these tanks/vessels also determine their application or use; while single wall storage tanks can be used for general application, double walled tanks/vessel are used for high pressure considerations. The Pressure vessels are designed to operate at above normal pressure


View Complete Details

Capping Machine With Fill Range Upto 30gms

The Automatic 128 or 168 Rotary Monoblock Dry Syrup Powder Filling with Capping Machine is suitable for Glass, Plastic, PET, HDPE, and LDPE Bottles with maximum speed of 100 Bottles per minute depending on Powder Fill Volume, Type of Powder, Bottle Diameter and Bottle Neck Diameter.


Machine in Stainless Steel Finish with heavy duty frame structure with S.S, Cladding. All parts coming in contact with Powders are made from SS316 Materials and HDPE Funnels.


The Machine works on proven time tested Vacuum and Air Systems to Fill powder in Bottle achieving higher speed and higher accuracy. Machine with unique Bottle Lifting and Neck Holding system avoid spillage of powder on bottle shoulder, neck and body keeps bottle clean and also avoid wastage of powder.


Machines require small area due to Monoblock design with Filling and capping operation. Machine with complete synchronization of Bottle Infeed Star Wheel, Powder Wheel movement and out feed Star wheel as well as capping operation for smoother operation. Machine with Rotary Bottle Moving system ensures very high speed powder filing through independent moving funnel along with bottles for greater speed and performance without compromising speed and fill accuracy. Machines with unique vibratory system inside the funnel helps filling of semi free flow type powder at higher speed.


Machine can be used for ROPP (Alum. Cap) as well as Screw Cap with the help of change parts. However for common application of ROPP Cap and Screw Capping on same machine, please ensure that the thread of Screw Cap should not have more than 1.5 turn for Capping, for separate application any type of Cap can be used without limitation.

View Complete Details

Automatic Monoblock Dry Syrup Powder Filling Cap Sealing Machine

SHPF-100 Automatic Monoblock Dry Syrup Powder Filling Cap Sealing Machine is a Compact machine used for filling and sealing of Dry Syrup in bottles.







  • The incoming dry container (sterilized and siliconised) are fed through the infeed Turn Table with suitably guided on the moving delrin flat conveyor belt at the required speed for feeding to the feed worm for correct spacing between two bottles and get enter into the infeed starwheel, which will be transferred below funnel, 16 nos. of funnel is mounted on round plate and powder filling head is mounted from centre pipe, which gives the flexibility to adjust position of wheel as per requirements and consumes less space on machine. Machine will be having a lifter assembly on base of bottom plate, when bottle come below funnel, bottom platform will lift the bottle and insert the bottle tight fit inside funnel. The sterilized powder is stored in to powder hopper is agitated by pair of mechanical agitators for maintaining consistency and uniform bulk density, powder wheel rotates at the pre-determined speed below the powder hopper with practically no clearance. Powder wheel consist of Piston in each port and behind the powder wheel and vacuum plate is provided there is no clearance between powder wheel and avacuum plate due to back spring pressure. Precise volume of powder is sucked in to the port of powder wheel during vacuum according to the piston length different fill size can be achieved. The excess powder is doctored off by a doctor blade, now doctor blades can be adjusted from outside also without removing powder hopper, when powder wheel indexes further and remain in the port due to the vacuum till it reaches just vertical position. The time dose of Compressed air, sterilized low pressure air or Nitrogen Gas sequentially flushes out powder from the port of powder wheel in to the funnel. Funnel will be equipped with square rod to break the solid slug of powder and powder will start to fill inside bottle, which is moving along with funnel. In this model Bottle is getting around 5 to 6 second filling time. Bottles further move with funnel and reaches to exit starwheel, which is infeed starwheel for eight head ROPP cap sealing machine, while rotating with startwheel bottle picks up the cap from exit end of chute, ROPP caps kept in orientation unit, automatically orient caps in right direction before entering into delivery chute. And Bottle is entering below the sealing head, consisting of total four rollers, Two rollers properly Skirts, Spins and Seals the cap and simultaneously another two roller performs perfect threading according to bottle neck diameter. After sealing operation, sealing head moves upward with help of cam and bottle enters into exit starwheel. Move further on conveyor belt for next operation.











View Complete Details

Automatic Volumetric Linear Vial Filling Machine

The Bhagwati make Automatic Volumetric Liquid Vial Filling with Rubber Stoppering Machine is suitable for Round Vials with maximum speed of 240 Vials per minute. The vial filling machine can give Maximum speed of 240 Vials per minute depending on nature of Liquids, Vial Neck Size and Fill Volume. Vial filling machine construction in fully Stainless Steel finish including machine frame structure. Machine with built-in Turn Tables at In-feed and Out-feed with individual drives to match the speed of incoming and outgoing vials for smoother operation. All parts coming in contact with Liquids and Rubber Stoppers are made from SS 316 Materials.



Technical Details of Volumetric Linear Vial Filling Machine


Model SBLF-100 SBLF-150 SBLF-200
Output / Hour* 2400 to 6000 3600 to 9000 5000 to 12000
Direction of Movement Left to Right
Number of head / Syringe 4 Nos. 6 Nos. 8 Nos.
Fill Size*** 1 ml to 100 ml
Electrical Specification**
Main Motor 1 HP / 415Volts / 50 Hz. 1.5 HP / 415Volts / 50 Hz.
Cap Feeding Bowl 0.5 HP / 415 Volts / 50 Hz.
View Complete Details

Automatic Six Head Bottle Ropp Cap Sealing Machine

  • Phase Single Phase
  • Machine main frame Square Pipe, Stainless Steel 304
  • Machine Coverings Complete in Stainless Steel 304
  • Product Contact Parts Stainless Steel 304
  • Non-Contact Parts Stainless Steel / Mild Steel / Aluminum / Teflon (Whichever is applicable)
  • Conveyor Slat Stainless Steel 304 Slat with Nylon Strips on Side
  • Conveyor Shafts Mild Steel with Hard Chrome or Zinc Plating
  • Conveyor Sprockets Mild Steel or Nylon
  • Bearings SKF / Nachi / Timken
  • Plating(Wherever Applicable) ENP / Zinc / Hard Chrome / Blackening
  • Capping Unit Stainless Steel .304
  • Bowl Stainless Steel 304
  • Vibratory Bowl Feeder Mild Steel Cladded in Stainless Steel 304
  • Vibrator Stand Mild Steel with ENP Plating
  • Cap Elevator frame (If machine is with Elevator) Stainless Steel 304
  • Elevator Belt PVC
  • Shute Stainless Steel 304
  • Support Rod on Existing point of indexing Star wheel Stainless Steel 304
  • Star Wheel with Back Guide 12 mm thick UHMW / Nylon
  • Guide Brackets Spectra make – Plastic
  • Guide Size 100mm / 150mm
  • Guide Rod Stainless Steel 304 (10mm Round Bar)
  • Slat Chain Pitch 3.5” Stainless Steel 304
  • Capping Head Pillar Mild Steel with ENP / Hard Chrome
  • Capping Head Motor Make 1 H.P Bonfiglioli
  • Capping Head Gear Box Make Bonfiglioli Ratio: 20:1
  • Cap Elevator Motor Make (If machine is with Elevator) Bonfiglioli
  • Cap Elevator Gearbox Make (If machine is with Elevator) Bonfiglioli Ratio: 20:1
  • Capping Head VFD Make 1 H.P Delta
  • Sensor Make Sick / Leuze / Panasonic
  • Proxy Autonix / Pulset
  • “No Cap in Shute Elevator Stop” Sensor (If machine is with Elevator) Panasonic
  • Electrical Wiring Ferrule Numbering on all the wires with Proper Markings
  • Electrical Components ABB / Delta /Spectra
  • Pneumatics SMC / Festo / Janatics
  • Air Pipes SMC / Festo / Janatics
  • Wires & Cables Labb
  • Control Panel Relay Card (Push Button Type )
  • Power 1 H.P / 230 V.AC
  • Compressed Air Required 3 H.P Compressor (6 bar pressure 0.5 CFM)

Specification of the equipment machines basics :


View Complete Details

Automatic Single Head Bottle Ropp Cap Sealing Machine

  • Phase Single Phase
  • Model SBCS-60R
  • Machine Name Automatic Single Head ROPP Caps Sealing Machines
  • Option With Bowl or With Cap Elevator
  • Production Speed Per Hour 1800 to 3000 Bottles per Hour (Speed Depends up on the size of caps & bottles).
  • Capping Unit Roll Over Pilfer Proof capper designed to thread and seal aluminum cap
  • Caps Feeding Vibratory Bowl Feeder
  • Machine Motion Rotary Motion -Index Based
  • Suitable for Products PET / Glass/Aluminum/ HDPE Bottle
  • Application To Tight & Seal the Caps on Bottles
  • Up-Down Movement Mechanical (Cam System)
  • Vibrator Pillar Mounting On main Platform
  • Speed Synchronization of Star Wheel & Capping Head Variable Frequency Drive
  • Working Height 860 mm (+50 mm)
  • Conveyor Length 6 Feet Depending upon the product
  • Machine Weight Approx 300 Kgs
  • Machine Platform Approx 1210mm (L) x 810mm (W)
  • Machine Dimension Approx 1830mm (L) x 1220mm (W) x 2440mm (H)
  • Change Parts Required in case of change in Cap Size & Bottle Size
  • Machine main frame Square Pipe, Stainless Steel 304
  • Machine Coverings Complete in Stainless Steel 304
  • Product Contact Parts Stainless Steel 304
  • Non Contact Parts Stainless Steel / Mild Steel / Aluminum / Teflon (Whichever is applicable)
  • Conveyor Slat Stainless Steel 304 Slat with Nylon Strips on Side
  • Conveyor Shafts Mild Steel with Hard Chrome or Zinc Plating
  • Conveyor Sprockets Mild Steel or Nylon
  • Bearings SKF / Nachi / Timken
  • Plating(Wherever Applicable) ENP / Zinc / Hard Chrome / Blackening
  • Capping Unit Stainless Steel .304
  • Bowl Stainless Steel 304
  • Vibratory Bowl Feeder Mild Steel Cladded in Stainless Steel 304
  • Vibrator Stand Mild Steel with ENP Plating
  • Shute Stainless Steel 304
  • Support Rod on Existing point of indexing Starwheel Stainless Steel 304
  • Star Wheel with Back Guide 12 mm thick UHMW / Nylon
  • Guide Brackets Spectra make – Plastic
  • Guide Size 100mm / 150mm
  • Guide Rod Stainless Steel 304 (10mm Round Bar)
  • Slat Chain Pitch 3.5” Stainless Steel 304 (3mm thickness)
  • Capping Head Pillar Mild Steel with ENP / Hard Chrome
  • Capping Head Motor Make 1 H.P Bonfiglioli
  • Capping Head Gear Box Make Bonfiglioli Ratio: 20:1
  • Capping Head VFD Make 1 H.P Delta
  • Sensor Make Sick / Leuze / Panasonic
  • Proxy Autonix / Pulset
  • Electrical Wiring Ferrule Numbering on all the wires with Proper Markings
  • Electrical Components ABB / Delta /Spectra
  • Wires & Cables Labb
  • Control Panel Relay Card (Push Button Type )
  • Power 1 H.P / 230 V.AC
We are leading supplier of this product.
View Complete Details

Semi Automatic Single Head Bottle Ropp Cap Sealing Machine

  • Phase Single Phase
  • Model SBCS-40R
  • Machine Name Semi Automatic Single ROPP Head Caps Sealing Machines
  • Production Speed Per Hour 480 to 600 Bottles per Hour (Speed Depends up on the size of caps & bottles).
  • Capping Unit Roll Over Pilfer Proof capper designed to thread and seal aluminum cap
  • Caps Feeding Manually on bottle
  • Caps Hammering Pneumatic System
  • Machine Motion Rotary Motion -Index Based
  • Suitable for Products PET / Glass/Aluminum/ HDPE Bottle
  • Suitable for Products Plastic, HDPE, PP Cap
  • Application To Tight & Seal the Caps on Bottles
  • Up-Down Movement Mechanical (Cam System)
  • Machine Weight Approx 250 Kgs
  • Machine Dimension Approx 610mm (L) x 610mm (W) x 1525mm (H)
  • Machine main frame Square Pipe, Stainless Steel 304
  • Machine Coverings Complete in Stainless Steel 304
  • Product Contact Parts Stainless Steel 304
  • Non Contact Parts Stainless Steel / Mild Steel / Aluminum / Teflon (Whichever is applicable)
  • Bearings SKF / Nachi / Timken
  • Plating(Wherever Applicable) ENP / Zinc / Hard Chrome / Blackening
  • Capping Unit Stainless Steel .304
  • Capping Head Pillar Mild Steel with ENP / Hard Chrome
  • Capping Head Motor Make 1 H.P Bonfiglioli
  • Capping Head Gear Box Make Bonfiglioli Ratio: 20:1
  • Capping Head VFD Make 1 H.P Delta
  • Sensor Make Sick / Leuze / Panasonic
  • Proxy Autonix / Pulset
  • “No Cap in Shute Elevator Stop” Sensor (If machine is with Elevator) Panasonic
  • Electrical Wiring Ferrule Numbering on all the wires with Proper Markings
  • Electrical Components ABB / Delta /Spectra
  • Pneumatics SMC / Festo / Janatics
  • Air Pipes SMC / Festo / Janatics
  • Wires & Cables Labb
  • Control Panel Relay Card (Push Button Type )
  • Power 1 H.P / 230 V.AC
  • Compressed Air Required 3 H.P Compressor (6 bar pressure 0.5 CFM)
We are leading supplier of this product.
View Complete Details

Automatic Four Head Bottle Ropp Cap Sealing Machine

  • Phase Single Phase
  • Model SBCS-100R
  • Machine Name Automatic Four Head ROPP Caps Sealing Machines
  • Option With Bowl or With Cap Elevator
  • Production Speed Per Hour 4800 to 5400 Bottles per Hour (Speed Depends up on the size of caps & bottles).
  • Capping Unit Roll Over Pilfer Proof capper designed to thread and seal aluminum cap
  • Caps Feeding Vibratory Bowl Feeder
  • Machine Motion Rotary Motion -Index Based
  • Suitable for Products PET / Glass/Aluminum/ HDPE Bottle
  • Application To Tight & Seal the Caps on Bottles
  • Up-Down Movement Mechanical (Cam System)
  • Vibrator Pillar Mounting On main Platform
  • Speed Synchronization of Star Wheel & Capping Head Variable Frequency Drive
  • Working Height 860 mm (+50 mm)
  • Conveyor Length 6 Feet Depending upon the product
  • Machine Weight Approx 300 Kgs
  • Machine Platform Approx 1210mm (L) x 810mm (W)
  • Machine Dimension Approx 1830mm (L) x 1220mm (W) x 2440mm (H)
  • Change Parts Required in case of change in Cap Size & Bottle Size
  • Machine main frame Square Pipe, Stainless Steel 304
  • Machine Coverings Complete in Stainless Steel 304
  • Product Contact Parts Stainless Steel 304
  • Non Contact Parts Stainless Steel / Mild Steel / Aluminum / Teflon (Whichever is applicable)
  •   (Whichever is applicable)
  • Conveyor Slat Stainless Steel 304 Slat with Nylon Strips on Side
  • Conveyor Shafts Mild Steel with Hard Chrome or Zinc Plating
  • Conveyor Sprockets Mild Steel or Nylon
  • Bearings SKF / Nachi / Timken
  • Plating(Wherever Applicable) ENP / Zinc / Hard Chrome / Blackening
  • Capping Unit Stainless Steel .304
  • Bowl Stainless Steel 304
  • Vibratory Bowl Feeder Mild Steel Cladded in Stainless Steel 304
  • Vibrator Stand Mild Steel with ENP Plating
  • Shute Stainless Steel 304
  • Support Rod on Existing point of indexing Starwheel Stainless Steel 304
  • Star Wheel with Back Guide 12 mm thick UHMW / Nylon
  • Guide Brackets Spectra make – Plastic
  • Guide Size 100mm / 150mm
  • Guide Rod Stainless Steel 304 (10mm Round Bar)
  • Slat Chain Pitch 3.5” Stainless Steel 304 (3mm thickness)
  • Capping Head Pillar Mild Steel with ENP / Hard Chrome
  • Capping Head Motor Make 1 H.P Bonfiglioli
  • Capping Head Gear Box Make Bonfiglioli Ratio: 20:1
  • Capping Head VFD Make 1 H.P Delta
  • Sensor Make Sick / Leuze / Panasonic
  • Proxy Autonix / Pulset
  • Electrical Wiring Ferrule Numbering on all the wires with Proper Markings
  • Electrical Components ABB / Delta /Spectra
  • Wires & Cables Labb
  • Control Panel Relay Card (Push Button Type )
  • Power 1 H.P / 230 V.AC
We are leading supplier of this product.
View Complete Details

Automatic Eight Head Bottle Ropp Cap Sealing Machine

  • Phase Single Phase
  • Model SBCS-200R
  • Machine Name Automatic Eight Head ROPP Caps Sealing Machines
  • Option With Bowl or With Cap Elevator
  • Production Speed Per Hour 7200 to 9000 Bottles per Hour (Speed Depends up on the size of caps & bottles).
  • Capping Unit Roll Over Pilfer Proof capper designed to thread and seal aluminum cap
  • Caps Feeding Vibratory Bowl Feeder
  • Caps Hammering Pneumatic System
  • Machine Motion Rotary Motion -Index Based
  • No Cap in Shute Elevator Stop (If machine is with Elevator) Sensor
  • Suitable for Products PET / Glass/Aluminum/ HDPE Bottle
  • Application To Tight & Seal the Caps on Bottles
  • Up-Down Movement Mechanical (Cam System)
  • Vibrator Pillar Mounting Main Platform
  • Speed Synchronization of Star Wheel & Capping Head Variable Frequency Drive
  • Working Height 860 mm (+50 mm)
  • Conveyor Length 6 Feet Depending upon the product
  • Machine Weight Approx 300 Kgs
  • Machine Platform Approx 1210mm (L) x 810mm (W)
  • Machine Dimension Approx 1830mm (L) x 1220mm (W) x 2440mm (H)
  • Change Parts Required in case of change in Cap Size & Bottle Size
  • Machine main frame Square Pipe, Stainless Steel 304
  • Machine Coverings Complete in Stainless Steel 304
  • Product Contact Parts Stainless Steel 304
  • Non Contact Parts Stainless Steel / Mild Steel / Aluminum / Teflon (Whichever is applicable)
  • Conveyor Slat Stainless Steel 304 Slat with Nylon Strips on Side
  • Conveyor Shafts Mild Steel with Hard Chrome or Zinc Plating
  • Conveyor Sprockets Mild Steel or Nylon
  • Bearings SKF / Nachi / Timken
  • Plating(Wherever Applicable) ENP / Zinc / Hard Chrome / Blackening
  • Capping Unit Stainless Steel .304
  • Bowl Stainless Steel 304
  • Vibratory Bowl Feeder Mild Steel Cladded in Stainless Steel 304
  • Vibrator Stand Mild Steel with ENP Plating
  • Cap Elevator frame (If machine is with Elevator) Stainless Steel 304
  • Elevator Belt PVC
  • Shute Stainless Steel 304
  • Support Rod on Existing point of indexing Star wheel Stainless Steel 304
  • Star Wheel with Back Guide 12 mm thick UHMW / Nylon
  • Guide Brackets Spectra make – Plastic
  • Guide Size 100mm / 150mm
  • Guide Rod Stainless Steel 304 (10mm Round Bar)
  • Slat Chain Pitch 3.5” Stainless Steel 304
  • Capping Head Pillar Mild Steel with ENP / Hard Chrome
  • Capping Head Motor Make 1 H.P Bonfiglioli
  • Capping Head Gear Box Make Bonfiglioli Ratio: 20:1
  • Cap Elevator Motor Make (If machine is with Elevator) Bonfiglioli
  • Cap Elevator Gearbox Make (If machine is with Elevator) Bonfiglioli Ratio: 20:1
  • Capping Head VFD Make 1 H.P Delta
  • Sensor Make Sick / Leuze / Panasonic
  • Proxy Autonix / Pulset
  • “No Cap in Shute Elevator Stop” Sensor (If machine is with Elevator) Panasonic
  • Electrical Wiring Ferrule Numbering on all the wires with Proper Markings
  • Electrical Components ABB / Delta /Spectra
  • Pneumatics SMC / Festo / Janatics
  • Air Pipes SMC / Festo / Janatics
  • Wires & Cables Labb
  • Control Panel Relay Card (Push Button Type )
  • Power 1 H.P / 230 V.AC
  • Compressed Air Required 3 H.P Compressor (6 bar pressure 0.5 CFM)
We are leading supplier of this product.
View Complete Details

Ic Screw Cap Plastic Cap Sealing Machine

The semi automatic cap sealing machine is precision built on sturdy welded steel frame completely enclose in stainless steel sheet and doors are provided to facilitate the servicing of machine.






Require manually feeding & unloading container, where the body and the neck of the container are positioned below the rotating head, and sealing head is performing perfect operation of sealing.




View Complete Details

Automatic Screw Cap Plastic Cap Sealing Machine Multi Head

BHAGWATIs Automatic Screw Capping Machineis versatile, self-supported on stainless steel leg with height adjustable adjustment system. The machine is precision built on sturdy welded steel frame completely enclose in stainless steel sheet and doors are providing to facilitate the servicing of machine.






The feed container moving on conveyor belt are feed into an in-feed star wheel, bringing the container below the sealing head in the subsequent indexing part, mean while the rotating head pickup a cap from the cap star wheel which is receiving from delivery chute of cap filling bowl, where the body and the neck of the container are positioned below the rotating head, where the sealing head is performing perfect operation of sealing, rotating head is design to seal container according to pre-set torque.




View Complete Details

Eight Head Bottle Screw Capping Machine

Automatic Screw Capping Machine is versatile, self-supported on stainless steel leg with height adjustable adjustment system. The machine is precision built on sturdy welded steel frame completely enclose in stainless steel sheet and doors are providing to facilitate the servicing of machine





The feed container moving on conveyor belt are feed into an in-feed star wheel, bringing the container below the sealing head in the subsequent indexing part, mean while the rotating head pickup a cap from the cap star wheel which is receiving from delivery chute of cap filling bowl, where the body and the neck of the container are positioned below the rotating head, where the sealing head is performing perfect operation of sealing, rotating head is design to seal container according to pre-set torque.





View Complete Details

Six Head Bottle Screw Capping Machine

Automatic Screw Capping Machine is versatile, self-supported on stainless steel leg with height adjustable adjustment system. The screw capper machine is precision built on sturdy welded steel frame completely enclose in stainless steel sheet and doors are providing to facilitate the servicing of screw capper machine.






The feed container moving on conveyor belt are feed into an in-feed star wheel, bringing the container below the sealing head in the subsequent indexing part, mean while the rotating head pickup a cap from the cap star wheel which is receiving from delivery chute of cap filling bowl, where the body and the neck of the container are positioned below the rotating head, where the sealing head is performing perfect operation of sealing, rotating head is design to seal container according to pre-set torque.




View Complete Details

Flipp-Off Capping Machine

BHAGWATIs Automatic Aluminum Cap Sealing Machineis versatile, self-supported on stainless steel leg with height adjustable adjustment system. The machine is precision built on sturdy welded steel frame completely enclose in stainless steel sheet and doors are providing to facilitate the servicing of machine.





The feed container moving on conveyor belt are feed into an in-feed star wheel through In-feed worm, star wheel bringing the container below the sealing head in the subsequent indexing part, mean while the vial pickup a cap from the delivery chute of cap filling bowl, where the body and the neck of the container are positioned below the rotating head, where the sealing head is performing perfect operation of sealing.





View Complete Details

Automatic Six Head Vial PP

BHAGWATIs Automatic Aluminum Cap Sealing Machineis versatile, self-supported on stainless steel leg with height adjustable adjustment system. The machine is precision built on sturdy welded steel frame completely enclose in stainless steel sheet and doors are providing to facilitate the servicing of machine





The feed container moving on conveyor belt are feed into an in-feed star wheel through In-feed worm, star wheel bringing the container below the sealing head in the subsequent indexing part, mean while the vial pickup a cap from the delivery chute of cap filling bowl, where the body and the neck of the container are positioned below the rotating head, where the sealing head is performing perfect operation of sealing.





View Complete Details

Automatic Four Head Vial PP

BHAGWATIs Automatic Aluminum Cap Sealing Machineis versatile, self-supported on stainless steel leg with height adjustable adjustment system. The machine is precision built on sturdy welded steel frame completely enclose in stainless steel sheet and doors are providing to facilitate the servicing of machine.





The feed container moving on conveyor belt are feed into an in-feed star wheel through In-feed worm, star wheel bringing the container below the sealing head in the subsequent indexing part, mean while the vial pickup a cap from the delivery chute of cap filling bowl, where the body and the neck of the container are positioned below the rotating head, where the sealing head is performing perfect operation of sealing.





View Complete Details

Dosing Cup Placement

Automatic Measuring / Dozing Cup Placement & Pressing machine is highly efficient machine with elegant look, consists of conveyor, vibrator, feed worm, container holding star plate, & pressing plate. All the exposed parts of the unit are in S.S., chrome platted or cladded with S.S. The machine is precision built on sturdy welded steel frame completely enclose in stainless steel sheet and doors are provided to facilitate the servicing of machine.






The feed container moving on conveyor belt are feed into an In-feed star wheel through In-feed worm, star wheel bringing the sealed container below the pressing plate, mean while the sealed bottle pickup a cup from the delivery chute of bowl, where the body and the neck of the container are positioned below the pressing plate, where the pressing plate press cup gradually & performing perfect operation of cup pressing.




View Complete Details

Automatic Measuring/Dosing Cup Placement

Automatic Measuring / Dozing Cup Placement & Pressing machine is highly efficient machine with elegant look, consists of conveyor, vibrator, feed worm, container holding star plate, & pressing plate. All the exposed parts of the unit are in S.S., chrome platted or cladded with S.S. The machine is precision built on sturdy welded steel frame completely enclose in stainless steel sheet and doors are provided to facilitate the servicing of machine.



The feed container moving on conveyor belt are feed into an In-feed star wheel through In-feed worm, star wheel bringing the sealed container below the pressing plate, mean while the sealed bottle pickup a cup from the delivery chute of bowl, where the body and the neck of the container are positioned below the pressing plate, where the pressing plate press cup gradually & performing perfect operation of cup pressing.

View Complete Details

Automatic High Speed Measuring

AThe Automatic Linear Measuring Cap Pressing/ Cup Placement/Cap Pressing Machine Model SBCPP-300. Machine is suitable for Round or other shape of Glass, Plastic, PET, LDPE, and HDPE Bottles with maximum speed of 300 Bottles per minute depending on Bottle Diameter, Bottle Height, Bottle Shape and Measuring Cap Size.


Machine with special Linear Design with No Change Parts system for Change in Bottle Size. Machine with Totally Synchronized Front and Back Bottle Holding Belt with Top Stabilizing and Cap Pressing Belt System.


Specially Machine construction in Stainless Steel finish including machine M.S. frame structure with Stainless Steel Cladding/Enclosures. Machine is ideal for application in Pharmaceutical, Food, Pesticides, and Cosmetic & Other Industries. Machine with user friendly operation to handle various type and size of bottles.


The Machine is equipped with Orientation type Cap Feeder or Vibratory type Bowl Feeder depending on cap shape and size for continues feeding of Measuring Cap for online operation on any liquid of powder filling line. Machine suitable for various sizes of Bottles and Measuring Cap with the help of change parts. Machine is suitable for application in Pharmaceutical and other industries requiring higher production speed on automatic online operation.





The feed container moving on conveyor belt are feed into an In-feed star wheel through In-feed worm, star wheel bringing the sealed container below the Cap Pressing plate, mean while the sealed bottle pickup a cup from the delivery chute of bowl, where the body and the neck of the container are positioned below the Cap Pressing plate, where the Cap Pressing plate press cup gradually & performing perfect operation of cup /Cap Pressing.





View Complete Details

Automatic High Speed Measuring / Dosing Cup Placement Machine

AThe Automatic Linear Measuring Cap Pressing/ Cup Placement/Cap Pressing Machine Model SBCPP-300. Machine is suitable for Round or other shape of Glass, Plastic, PET, LDPE, and HDPE Bottles with maximum speed of 300 Bottles per minute depending on Bottle Diameter, Bottle Height, Bottle Shape and Measuring Cap Size.


Machine with special Linear Design with No Change Parts system for Change in Bottle Size. Machine with Totally Synchronized Front and Back Bottle Holding Belt with Top Stabilizing and Cap Pressing Belt System.


Specially Machine construction in Stainless Steel finish including machine M.S. frame structure with Stainless Steel Cladding/Enclosures. Machine is ideal for application in Pharmaceutical, Food, Pesticides, and Cosmetic & Other Industries. Machine with user friendly operation to handle various type and size of bottles.


The Machine is equipped with Orientation type Cap Feeder or Vibratory type Bowl Feeder depending on cap shape and size for continues feeding of Measuring Cap for online operation on any liquid of powder filling line. Machine suitable for various sizes of Bottles and Measuring Cap with the help of change parts. Machine is suitable for application in Pharmaceutical and other industries requiring higher production speed on automatic online operation.





The feed container moving on conveyor belt are feed into an In-feed star wheel through In-feed worm, star wheel bringing the sealed container below the Cap Pressing plate, mean while the sealed bottle pickup a cup from the delivery chute of bowl, where the body and the neck of the container are positioned below the Cap Pressing plate, where the Cap Pressing plate press cup gradually & performing perfect operation of cup /Cap Pressing.





View Complete Details

Fully Automatic Front And Back Sticker (Self-Adhesive) Labeler Machine

  • Label Data Inputs Not required due to In Built Automatic Label Length Detection System
  • Label Placing Adjustments User Friendly And Simple
  • Pass-Word System Fully Protected, Not required by operator
  • Voltage Fluctuations Self-Protected for Voltage Fluctations
  • Speed Variation Single Point Speed Variation Control - Synchronizing all operations
  • Label Length Unlimited Label Length
  • Maintenance Virtually Maintenance Free Machine
  • Spool Largest 400mm diameter

Fully Automatic, User Friendly, Sticker (Self-Adhesive) Labelling Machine, Suitable to apply accurate Labels on Double Side (Front & Back) of Flat / Oval / Square shaped products having PET, Plastic, HDPE, LDPE, Glass or any other surface.


The Fully Automatic Front Back Sticker Labeler Machine incorporates latest sophisticated MicroProcessor Controlled Stepper Motor Drive, Fiber Optic Label and Container sensing system. SBMA-120F Sticker Labeling machines are 100% User Friendly, Virtually Maintenance Free and does not require Data Inputs for Label Size.

View Complete Details

IV Bottle Packing Line

We offer LVP IV bottle Leak check machine, IV bottle Inspection machine, IV bottle labelling machine, IV bottle Packing conveyor


IV BOTTLE LEAK TESTING MACHINE


IV bottle Leak testing machine pressure testing online thru rotating unit




  • IV bottle testing any pin holes left out during the forming and the filling in Blow fill seal or FFS bottle pack machines.

  • Machine conveyor belt feeding bottle to rotate the flexible Bottles under pressure with mechanical adjustable round bar or strip attachment.

  • IV bottle leak machine can be installed just before the Visual inspection Labelling Machine and conveyor packing line.

  • During operations Sometimes changes of having a very minute pin hole which cannot be detected in normal course, but when it passes through the machine under pressure this pin holes is immediately open and given the leak and spraying , that is, how this machine ensures that there is no leakage or pin holes in the bottle.




IV bottle inspection machine , INSPECTION M/C for LVP IV BOTTLE





  • Our machine Designed as per cGMP Current Good Manufacturing Practices compliance.

  • Machine structure is made stainless steel AISI 304 with matt finish.

  • Bottle visual inspection with high output.

  • Black & white board as per GMP norms

  • Three way Belt drives through gear motor with variable frequency drive.

  • Easy maintenance.

  • Rigid Vibration free Construction.







Top Side Labelling Machine, Top Label Applicator Application On Any Product




  • This Model is suitable for applying sticker labels on top of any type, shape & size of container.

  • Depending upon the size and shape of the bottle or container, the conveying arrangement can be designed such as belt or slat conveyor with pusher depend of bottles.

  • Our top labelling machine shall be use Containers like rigid/flexible IV bottles, boxes, jar lids, cassettes, books & diaries, corrugated boxes, blisters ect. can be labelled on this machine operates at the speed of 100-200-300 containers/min. (depending upon feeding arrangement) Configuration of the machine can be designed as per specific requirement such as folding the lable on2/3 sides etc.


The same top side labellers model is used for FFS Ampoule cassettes for Top & Bottom labelling with special configuration.



PACKING CONVEYOR BELT.




  • Packing conveying of goods for packing.

  • PVC and endless belt for long life.

  • Structure is made from AISI 304 with matt finish.

  • Belt-alignment system for long life & striate running of belt.

  • Available in varioue sizes : 9 Or 12 width and any length.

  • Food grade PVC coated Widely used in any packing lines in foods, Pharmaceuticals, Cosmetics, Distilleries & Breweries, Pesticide etc.



ROLLER CONVEYORS




  • Our designed in straight or turning type with desired slope or specifications.

  • Rollers of M.S.Nylon / S.S. of diff. dia. & pitch are available

  • It can be free moving or with positive drive.

View Complete Details

Gel Filling

It is applicable to different shaped bottles and plastic bottles: plastic, glass bottle and mould bottle. The bottle - in and bottle- out has specialized structure. It doesn't drop bottles or nip bottles.
Suitable filling material: This machine adopts piston pump, which is suitable for all kind materials, with highfilling speed and high filling precision.
For filling corrosive, the position pump will be made by silicon rubber, Teflon, ceramics and other corrosion resistance materials.
Controlling system: The machine adopts full-auto PLC and human-computer touch screen control system.
For different volumes adjustment, we set several procedures, mode 1, mode 2, mode 3``` Operators do not need too much complicated adjustments, the filling machine can switch betweenthe three models easily.
Different volume adjustment: By adjusting the piston pump, it also can fill all the liquid from 500-2500ml.
Bottle position correct device:To ensure the bottles and filling nozzles are in the correct position, we add a special bottles position device to make the whole filling process smooth and stable.
No bottle no filling: Filling nozzles. The filling nozzles are specialized made: anti drop. Also, the filling nozzles will come into the bottle bottom, and moving up slowly when filling.
Cleaning: The pump uses quick-fit removal Structure, it is easy cleaning and disinfection.
View Complete Details

Rotary Piston Pumps

Rotary Piston Pump Small Bottle Filling Capping Machine is widely used in the food, cosmetic, pharmaceutical, oil and other industries, is specially made for the mainly applied to various material round bottle, flat bottles. And the Filling material could be small dose of medicine liquid, like nail polish, eyedrop, syrup, iodine, essential oil, e-liquid etc.
Rotary Piston Pump Small Bottle Filling Capping Machine adopts peristaltic pump for filling materials. By adjusting the filling time by touch screen, it can fill all of the bottles in one filling machine, with quick speed and high precision.
The filling nozzle will be automatically inserted into the bottle to carry out the filling and then rapidly ascend, which can reduce the air bubbles. The product integrates electric and pneumatic functions into one, with reasonable design, stable performance, accurate quantity, glass table surface, automatic bottle feeding, steady operation without noise, electric speed control to the filling speed and filling volume and convenient maintenance and cleaning. The new type filling equipment is the best choice for the realization of automatic production.
View Complete Details

Peanut Butter Machine

This hot filling machine is specially made for viscous liquid such as concentrated jucie , honey, butter, cream, applied to bottleof all sizes. It is widely used in industries such as food, beverage, cosmetics etc.

The Piston filling machine is designed by our company in the reference overseas similar product, and adds some additional function, which makes the product more simple and convenient in operation, adjustment, cleaning and maintenance.
The liquid filling machine is reasonable in design, simple and beautiful in appearance, and easy in filling volume adjustment.
The parts contacted with material are made of 304L or 316L stainless steel.
No bottle no filling. Equiped with count function.bottle positioning system and liquid level control system.
Adopting German FESTO, Taiwan AirTac pneumatic components and Taiwan's electrical control parts, the performance is stable.
View Complete Details

Sugar Coated Tablet

Traditional sugar coating is performed in what is generally described as a conventional coating pan. However, the desire to reduce the time needed for the sugar coating process has led to the trend towards side-vented pans, which can be modified to introduce the sugar syrup via a dosing bar, rather than spraying the tablets as with film coating. Sugar coating liquids used in preparing sugar coated tablets contain binders such as gelatin or gum arabic so as to increase strength of the sugar coating layer or to increase bonding strength between an uncoated tablet and the sugar-coating layer.

View Complete Details

Film Coated Tablets

Film coating is the largest sector of the tablet colouring market in Phrama industries. Film coating techniques reduce process times, offer greater control over coating parameters and provide more opportunity for innovation. Film coating involves the deposition of a thin polymer layer onto the tablet core, usually by a spray method. Conventional sugar panning equipment can be used but more specialized machinery, such as the side-vented pan, is used to control the processing conditions, which include temperature, humidity, spray rate and mixing of the tablet bed. Industry developments have led to the simplification, where possible, of film coating systems for shade criteria, microbial control and processing improvements.


View Complete Details

Eye Drop Machine

Stainless Steel Small Bottle Filling Machine, Eye Drop Filling Machine is widely used in the food, cosmetic, pharmaceutical, oil and other industries, is specially made for the mainly applied to various material round bottle, flat bottles. And the Filling material could be small dose of medicine liquid, like nail polish, eyedrop, syrup, iodine, essential oil, e-liquid etc.
Stainless Steel Small Bottle Filling Machine, Eye Drop Filling Machine adopts peristaltic pump for filling materials. By adjusting the filling time by touch screen, it can fill all of the bottles in one filling machine, with quick speed and high precision.
The filling nozzle will be automatically inserted into the bottle to carry out the filling and then rapidly ascend, which can reduce the air bubbles. The product integrates electric and pneumatic functions into one, with reasonable design, stable performance, accurate quantity, glass table surface, automatic bottle feeding, steady operation without noise, electric speed control to the filling speed and filling volume and convenient maintenance and cleaning. The new type filling equipment is the best choice for the realization of automatic production.
View Complete Details

Sugar Coated Tablets

Traditional sugar coating is performed in what is generally described as a conventional coating pan. However, the desire to reduce the time needed for the sugar coating process has led to the trend towards side-vented pans, which can be modified to introduce the sugar syrup via a dosing bar, rather than spraying the tablets as with film coating. Sugar coating liquids used in preparing sugar coated tablets contain binders such as gelatin or gum arabic so as to increase strength of the sugar coating layer or to increase bonding strength between an uncoated tablet and the sugar-coating layer.
View Complete Details

Jelly Cup

Specially offered for pre-made plastic cup, paper cup, and paper-plastic cup, the rotary cup filling and sealing machine can be used to package liquid and semi-viscous material, including yogurt, milk beverage, soya-bean milk, fruit juice, jelly, ice cream, seasoning, daily necessities, just to name a few.
View Complete Details

Lubricant Blending Plant

we manufacturer and exported of Grade of Engine oil blending plant , Transmission Gear oil blending plant , Break oil blending plant , Motor Oil blending plant , Engine Oil blending plant, Hydraulic oil blending plant , Industrial oil blending plant , Transformer oil blending plant , White oil blending plant, oils blending plant , Filling machine , capping , induction cap sealing machine and labelling machine for line for lube oil like engine oil, gear oil, brake oil, hydraulic oil.
View Complete Details

Toilet Soap Wrapping Machine

High speed wrapping machine capable of wrapping toilet soaps with stiffener and heat sealable (hot melt coated) at a speed up to 160 ppm(depending on nature of product and wrapper). Ingress to the machine is by means of an infeed belt conveyor engineered to index at higher speed. This conveyor is set at right angle to the flow of product for subsequent wrapping operation and can have right hand or left hand orientation to suit the space requirement. Handling of product is gentle throughout the operation and any rubbing of naked soap with stationary surface is avoided, Heavy cast iron structure for vibration absorption and durability.Heavy cast iron structure for vibration absorption and durability.Automatic Print Registration Unit by means of imported sensor, PID temperature controls from Honeywell or equivalent make, The machine speed upto 160 ppm (machine speed and accuracy is dependent of quality of packing material, soap size and its quality, uniform inflow of the product) with Heavy distortion free cast structure.
View Complete Details

Water Bottling Equipment

  • Power 440 VAC , 3Phase
  • SPEED 20-100 Bottles/Min
Bottled water filling machine is Fully-Automatic Bottling Line for Juices, Drinking waters, Wines, Liquids etc. Bottle Packaging machine is leading packaging machine in bottling machines. Bottled water filling machine, also known as packaged drinking water filling machinery is widely used to pack drinking waterfilling, mineral water filling, bottled water filling, spring water filling, juice filling, bottle filling etc. Water Bottling equipments are widely used in bottle filling of pet bottles and glass bottle Drinking water filling machinery can achived great bottled water packaging in asthetic sense of bottle filling. Flavoured milk filling can be done on bottled water machine. Bottled water filling machine can be used for juice filling, juice packaging in bottles at hot filling Bottled water filling machine also can be used as a vineger fillling equipment, wine filling equipment Packaged drinking water filling machine and water packaging machines are accurate and high speed production machines to pack drinking water in pet bottles.Bottle water filler, filler for water, water filling machinery, water machinery, water packing machinery, water packaging machines, water bottling machines, bottling machines for water, packaged drinking water filling lines, water packaging machinery, drinking water machines, filling machines for drinking water etc
View Complete Details

Automatic Tube Sticker Labeler Machine

  • Power 220V 50Hz 3000W
  • Model – Tube Labelling Machine SBHSL-60
  • Label speed Up to 50 tubes/min
  • Label accuracy ±1mm
  • Label Length (Max.) 150mm
  • Label width (Max.) 90 mm (H)
  • Tube diameter (Max.) ф65mm
  • Tube diameter (Min.) ф19mm
  • Tube length (Max.) 220mm
  • Label Reel Core Diameter ф76.2mm

This tube labeling machine incorporates the latest technology, a powerful stepper motor, and superior grade parts, in order to ensure the most accurate labeling. It also has a highly responsive and reliable system, and even a standard grade program controller and stepper system.


Further, the latest micro processor based control panel enables the users to easily communicate with the equipment. This advanced model also has a precise label controlling system. It is suitable for labeling tubes with diameter ranging from 20 mm to 60 mm. This tube labeling machine can function at a maximum speed of 50 tubes per minute. Moreover an automated feeding and air ejection system may also be used in order to load and unload the tubes.


The other characteristics of this equipment includes the no tube, no label system. Besides this a mechanical sensor can even be utilized for applying a transparent film label without the eyemark. We at Multipack offer a guarantee of one full year for all our tube labeling machines; effective from the shipment date, against any problems that may arise due to any manufacturing defect. Further we also offer a lowest price guarantee for all our tube labelers; as compared to the other equipments with similar quality and specifications, available in the market.


We thereby help you to avoid the trouble of comparing the price or doing any cost benefit analysis; because we assure that you will always pay the lowest price, whenever you buy any new packaging equipment from our company. We provide a prompt and friendly service to all existing and potential clients. In fact our staff will be extremely pleased to provide replies for all your queries as sincerely, and as soon as possible; whenever you inquire regarding new packaging equipment, or contact us after purchasing our machinery.

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Shree (Shree Bhagwati Machtech India Pvt Ltd.)
  • 9/A, Bhagyoday Estate, Ajod Dairy Road, Rakhial, Industrial Area, Ahmedabad - 380 023. Gujarat - 380023
  • Share us via