The DIG series is modular developed with excellent interchangeability. The pump is available either as bracket mounted 'BM' or gearbox mounted 'GM" models.more...
Delta DIG series employs proven Internal Gearing (Gear within Gear) principle for pumping. The main gear is keyed to the drive shaft, and rotates concentric in the pump casing. Idler is located on an eccentric pin on the front cover to rotate freely and meshes with main gear whenmore...
We are offering internal gear pump. Rotary internal gear pump has only two moving parts. “a gear within a gear”. The positive displacement of liquid is achieved by the complete filling of the spaces between the teeth of the rotor and idler gear. With every revolution of the pmore...
We are offering internal gear pump. the function internal gear pumps belongs to family of positive displacement pumps where in driving gear with internal tooth drives the gear and turns in same direction inside the pump casing.during the rotation of the driving gear the liquid inmore...
Delta DIG series employs proven Internal Gearing (Gear within Gear) principle for pumping. The main gear is keyed to the drive shaft, and rotates concentric in the pump casing. Idler is located on an eccentric pin on the front cover to rotate freely and meshes with main gear whenmore...
Medium Pressure Series PGI100PGI101PGI103 Internal gear pumps, medium pressure range Essential performance data: Available in sizes 2, 3, 5 and 6 5.4 cm³rotation - 100 cm³rotation Nominal pressure of up to 250 bar; maximum pressure of up to 320 bar Speed of up to 4000 rpm Also more...
Our internal gear pumps are characterised by extremely low noise levels, low pulsation and a very large speed range. The internal gear pumps are available in various sizes and pressure levels from 3.8 cm³rotation to 250 cm³rotation up to a max. nominal pressure of 330 bar. HYDAmore...
High Pressure Series PGI102 Internal gear pumps, high pressure range Essential performance data: Available in sizes 2, 3 and 6 3.8 cm³rotation - 250 cm³rotation Nominal pressure of up to 330 bar; maximum pressure of up to 350 bar Speed of up to 4000 rpm Also available as a more...
Proven Principle of Internal Gear is used in pumping. Rotor (Outer Gear) is keyed to drive shaft whereas idler (Inner Gear) is located eccentrically on a pin on the front cover. Both the gears are in mesh and the ports are sealed by a crescent located at the front cover. As the rmore...
WORKING : There are two Pumping Elements with Gear in Gear Principle. The Rotors are mounted on single shaft well supported on both the ends. As the Shaft Rotates, they mesh & un-mesh displacing the liquid axially through its pumping elements. Axially flow through elements ensuremore...
We are offering internal gear pump.the internal gear pumps that we offer have two moving parts and one stuffing box. The self-priming and bi-rotational internal gear pumps that we provide are ideal for high – viscosity applications. Besides, the internal gear pumps that we offemore...
We are offering internal gear pump. The internal gear pumps that we offer have two moving parts and one stuffing box. The self-priming and bi-rotational internal gear pumps that we provide are ideal for high – viscosity applications. Besides, the internal gear pumps that we offmore...
We are offering internal gear pump.the internal gear pumps that we offer have two moving parts and one stuffing box. The self-priming and bi-rotational internal gear pumps that we provide are ideal for high – viscosity applications. Besides, the internal gear pumps that we offemore...
Internal gear pump consists of a rotor ad idler. Liquid travels between them through “gear-within-a-gear” principle. Pump head forces the liquid to move out of discharge port. A seal is formed between the discharge and suction ports. This pushes liquid out of the discharge pomore...
Internal gear pump, Gear pumps provide a comparably continuous, non-pulsating flow in relation to diaphragm pumps or peristaltic pumps. For this reason, gear pumps may be preferred in a number of applications from laboratory to petrochemical and marine applications, and processesmore...
The very first pump produced by Delta Group in 1968 was an Internal Gear Pump Model DIG-10 for low-pressure burner service - till this day it is in production with great success. Subsequently Delta Group had the foresight to introduce several other designs, to take care of growinmore...
Innovative yet simple design with internal gear and vane Can handle high or low viscosity material Symmetrical internal structure: can run in either direction. Can be provided with heating jackets, safety valves or other modifications. Can be made with cast iron, carbon steel, stmore...
We offer internal gear pumps. Internal gear pump, manufactured by everest pumps & systems, is especially designed with precision-engineered gears along with mechanical seal and onboard ball bearings so that it can work efficiently. These pumps are considered to be ideal for pumpimore...