Province, China
Write a Review
Our Products
We are leaders in the market for providing best range of Cap Type Splice Closure, Horizontal Insert Plate Type Splice Closure and Non Removeable Screw Type Splice Closure
Dimension & Capacity
| Outside dimension (LxWxH) | 390X210X120 |
|---|---|
| Weight (excluding outside box) | 1900g - 2100g |
| Number of inlet/outlet ports | 6 ports |
| Diameter of fiber cable | φ7 - φ16(mm) |
| Capacity of FOSC | Bunchy : 6 - 96(Cores) Ribbon : max. 144 (Cores) |
Main Components
| Name of components | Quantity | Usage | Remarks |
|---|---|---|---|
| Housing | 1 set | Protecting fiber cable splices in whole | Internal diameter : 285x110 (mm) |
| Insert plate | 2 pairs | Fixing the housing | 175x56x30(mm) |
| Fiber optic splice tray (FOST) | Max. 4 trays (bunchy) Max. 4 trays (ribbon) | Fixing heat shrinkable protective sleeve and holding fibers | Suitable for : Bunchy : 6,8,12,16,24(cores) Ribbon : 3 (pieces) |
| Foundation | 1 set | Fixing fiber cable, reinforced core and FOST | |
| Seal fitting | 1 set | Sealing between FOSC cover and FOSC bottom | |
| Port plug | 6 pieces | Sealing empty ports | |
| Earthing deriving device | 1 set | Deriving metallic parts of fiber cables in FOSC for earthing connection | Configuration as per requirement |
Main Accessories & Special Tools
| Name of Accessories | Quantity | Usage | Remarks |
| Heat Shrinkable Protective Sleeve | Protecting fiber splices | Configuration as per capacity | |
| Nylon Tie | Fixing fiber with protective coat | Configuration as per capacity | |
| Earthing Wire | 1 piece | Putting through between earthing devices | To put through as per actual requirement |
| Abrasive Cloth | 1 piece | Scratching fiber cables | |
| Labeling Paper | 1 piece | Labeling fibers | |
| Special Wrench | 2 pieces | Installing and tightening nut of reinforced core and nut (plastic) of inlet/outlet tube | |
| Measuring Paper | 1 piece | To measure perimeter, of which its diameter is enlarged with seal tape | To measure perimeter with the corresponding measuring paper |
| Seal Tape | 1 ring | Enlarging diameter of fiber cable which fits in with gasket ring. | Configuration as per specification |
| Insulation Tape | 1 ring | Enlarging diameter of fiber cable for easy fixing | |
| Metal Hoop | 1 set | For wall mounting and pole hugging | |
| Buffer Tube | decided by customers | Hitched to fibers and fixed with FOST, managing buffer. | Configuration as per requirement |
| Desiccant | 1 bag | Put into FOSC before sealing for desiccating air |
Dimension & Capacity
| Outside dimension (LxWxH) | 470x180x125 (mm) |
|---|---|
| Weight (excluding outside box) | 2650g - 2975g |
| Number of inlet/outlet ports | 3 (pieces) on each side (total 6 pieces) |
| Diameter of fiber cable | φ8 - φ20 (mm) |
| Capacity of FOSC | Bunchy : 12 - 96 (Cores) Ribbon : max. 144(Cores) |
Main Components
| Name of components | Quantity | Usage | Remarks |
|---|---|---|---|
| Housing | 1 set | Protecting fiber cable splices in whole | Internal diameter : 320x120x100(mm) |
| Fiber optic splice tray (FOST) | max. 6 pcs (bunchy) max. 4pcs (ribbon) | Fixing heat shrinkable protective sleeve and holding fibers | Suitable for : Bunchy :12,24(cores) Ribbon : 3 (pieces) |
| Foundation | 1 set | Fixing reinforced core of fiber- cable and FOST | |
| Seal fitting | 1 set | Sealing between FOSC cover and FOSC bottom | |
| Port plug | 6 pieces | Sealing empty ports | |
| Pressure testing valve | 1 set | After injecting air, it is used for pressure testing and sealing testing | Configuration as per requirement |
| Earthing deriving device | 1 set | Deriving metallic components of fiber cable in FOSC for earthing connection | Configuration as per requirement |
Main Accessories & Special Tools
| Name of Accessories | Quantity | Usage | Remarks |
| Heat Shrinkable Protective Sleeve | Protecting fiber splices | Configuration as per capacity | |
| Nylon Tie | Fixing fiber with protective coat | Configuration as per capacity | |
| Earthing Wire | 1 piece | Putting through between earthing devices | To put through as per actual requirement |
| Abrasive Cloth | 1 piece | Scratching fiber cables | |
| Labeling Paper | 1 piece | Labeling fibers | |
| Special Wrench | 2 pieces | Installing and tightening nut of reinforced core and nut (plastic) of inlet/outlet tube | |
| Measuring Paper | 1 piece | To measure perimeter, of which its diameter is enlarged with seal tape | To measure perimeter with the corresponding measuring paper |
| Seal Tape | 1 ring | Enlarging diameter of fiber cable which fits in with gasket ring. | Configuration as per specification |
| Insulation Tape | 1 ring | Enlarging diameter of fiber cable for easy fixing | |
| Metal Hoop | 1 set | For wall mounting and pole hugging | |
| Buffer Tube | decided by customers | Hitched to fibers and fixed with FOST, managing buffer. | Configuration as per requirement |
| Desiccant | 1 bag | Put into FOSC before sealing for desiccating air |
Dimension & Capacity
| Outside dimension (Height x Diameter) | 430mm x 190mm |
|---|---|
| Weight (excluding outside box) | 2500g - 3100g |
| Number of inlet/outlet ports | 4 pieces |
| Diameter of fiber cable | φ8mm ~ φ16 mm |
| Capacity of FOSC | Bunchy : 12-96 (cores), Ribbon : up to 288 (cores) |
Main Components
| Name of components | Quantity | Usage | Remarks |
|---|---|---|---|
| FOSC cover | 1 piece | Protecting fiber cable splices in whole | Height x Diameter 355mm x 150mm |
| Fiber optic splice tray (FOST) | Max. 6 trays (bunchy) Max. 4 trays (ribbon) | Fixing heat shrinkable protective sleeve and holding fibers | Suitable for : Bunchy :12,24(cores) Ribbon : 6 (pieces) |
| Fiber holding tray | 1 pcs | Holding fibers with protective coat | |
| Base | 1set | Fixing internal and external structure | |
| Plastic hoop | 1 set | Fixing between FOSC cover and base | |
| Seal fitting | 1 pc | Sealing between FOSC cover and base | |
| Seal rings for inlet/outlet ports | 4pcs | For the inner seal of inlet/outlet ports; the diameter is 12.5mm,can shrink to 7mm | |
| Pressure testing valve | 1 set | After inject air, it is used for pressure testing and sealing testing | Configuration as per requirement |
| Earthing deriving device | 1 set | Deriving metal parts of fiber cables in FOSC for earthing connection | Configuration as per requirement |
Main Accessories & Special Tools
| Name of Accessories | Quantity | Usage | Remarks |
| Heat Shrinkable Protective Sleeve | Protecting fiber splices | Configuration as per capacity | |
| Nylon Tie | Fixing fiber with protective coat | Configuration as per capacity | |
| Earthing Wire | 1 piece | Putting through between earthing devices | To put through as per actual requirement |
| Abrasive Cloth | 1 piece | Scratching fiber cables | |
| Labeling Paper | 1 piece | Labeling fibers | |
| Special Wrench | 2 pieces | Installing and tightening nut of reinforced core and nut (plastic) of inlet/outlet tube | |
| Measuring Paper | 1 piece | To measure perimeter, of which its diameter is enlarged with seal tape | To measure perimeter with the corresponding measuring paper |
| Seal Tape | 1 ring | Enlarging diameter of fiber cable which fits in with gasket ring. | Configuration as per specification |
| Insulation Tape | 1 ring | Enlarging diameter of fiber cable for easy fixing | |
| Metal Hoop | 1 set | For wall mounting and pole hugging | |
| Buffer Tube | decided by customers | Hitched to fibers and fixed with FOST, managing buffer. | Configuration as per requirement |
| Desiccant | 1 bag | Put into FOSC before sealing for desiccating air |
Mr. Jimmy (Ningbo Full-link Photoelectric Limited)Easter Garden of Guanhaiwei Industrial Zone, Cixi City, Zhejiang, Province, China
Share us via
