Valves & Valve Fittings

Our offered Product range includes Metering Valves, Solenoid-Operated Refuel Shutoff Valve, BREAKAWAY VALVE, SR- SRH Safety Relief Valves and Electric Regulator Valve.

Metering Valves

The HR Series High Resolution Control Valves contain unique design features that make them the ultimate choice for precise low flow control, including: Spring loaded, non rising adjustment stem with 56-pitch thread provides smooth, non-reversing flow characteristics and 15-turn resolution; Non-rotating stainless steel valve pin with precision ground flat gives exact control; Valve pin o-ring guarantees positive shut-off without stem damage; Self-lubricating orifice liner assures long life; Seven available needle tapers expand valve capacity.

View Complete Details

Ask Latest Price & Details

Solenoid-Operated Refuel Shutoff Valve

Feature Able to withstand high vibration levels • Less than one pound weight
Dry Weight (lbs) 0.89 lbs
Fluid Temperature Min (C) -50ºC

Refuel shutoff valves such as the one above are mounted to a vertical rib and are designed with several features that are required in todays demanding aerospace needs (i.e. FAR25.981, windmilling & engine blade out). This style of valve is also designed to keep surge pressure low when the valve is commanded to shutoff, thus protecting any downstream equipment. With its low pressure drop and low leakage rate, this valve is an ideal choice when properly selected for the right application.

View Complete Details

Ask Latest Price & Details

BREAKAWAY VALVE

Feature Light weight design • Low pressure drop based on streamline valve design
Line Size - Inlet 1.0 inch
Minimum Fluid Temperature (F) -65

Proven lifesavers, Stratoflex breakaway valves separate under high loads on fluid lines exceeding a predetermined value. Upon separation, the valves automatically seal the fluids in the lines to effectively prevent spills. Breakaway valves are typically used on fuel lines, main fuel tanks, extended range aircraft auxiliary fuel tanks, air-to-air refueling systems, and fall-away external tanks. Tank vent lines often use the single valve versions.

View Complete Details

Ask Latest Price & Details

SR- SRH Safety Relief Valves

Minimum Operating Temperature (C) -40°
Orifice Size (mm) 10.4mm to 19.05mm

The Type SRH High Capacity Safety Relief Valves are designed and constructed to meet the requirements of Section VIII ASME Boiler and Pressure Vessel Code and ANSIASHRAE 15 Code requirements and bear the ASME Code Symbol (UV). Safety Relief Valves should be used to protect each refrigeration system pressure vessel that can be isolated by valves. In many localities state or municipal codes govern selection and installation of Relief Valves. Employing proven principles of design, these Safety Relief Valves are highly reliable and dependable. Precision machined moving parts of stainless steel, and a PTFE disc prevent sticking due to corrosion or cold welding and assure valve opening at the set pressure long after installation. They are not suitable for corrosive ambient atmospheres such as chlorine, etc.

View Complete Details

Ask Latest Price & Details

Electric Regulator Valve

Features/Benefits: Bi-polar stepper motor design delivers high force output • Actuator design provides great resolution

CDS valves are stepper motor actuated electric valves intended for use in direct expansion refrigeration and air conditioning applications. CDS valves are suited for a wide range of suction, liquid and discharge line applications due to their broad fluid temperature range. These applications include Electric Evaporator Pressure Regulator, Receiver Pressurization and Condenser Holdback for low ambient control. These valves are approved for use with HCFC, HFC, HFO and HC refrigerants and Mineral, Alkylbenzene and Polyolester Oils.

View Complete Details

Ask Latest Price & Details

EBV Ball Valves

Features/Benefits: Welded body joint. Factory tested to ensure positive leak free performance. • Full port sizes for unrestricted flow. • Dual teflon seals to prevent leakage

The Sporlan Ball Valve is a welded body joint that is factory tested to ensure positive leak-free performance. Dual Teflon seals surrounds the polished, brass ball to prevent leakages. There is an internal relief port design that ensures positive shut off of the valve in either flow direction, even during system evacuation. All Ball valves are bi-directional and may be installed in any position.

View Complete Details

Ask Latest Price & Details

MOTOR-OPERATED FUEL SHUTOFF VALVE

Specialities A lightweight and high-reliability design • End stroke position indication signals
Dry Weight (lbs) 2.10 lbs
Temperature Range (C) -67ºF to 185ºC

This type of motor-operated fuel shutoff valve is either a ball-valve style or barrel type and is designed with one or more of the following functions: (1) to cut-off fuel flow into the engine in the event of a fire, (2) to allow fuel cross transfer between left and right wing tanks for in-flight CG control, and (3), and to provide APU isolation. The material and finishes used in the construction of the valve and those of similar, previously qualified, valves are unaffected by several environmental conditions listed in RTCA DO-160 and MIL-STD-810. This elegantly simple design is extremely reliable and several variations of this valve have been produced by Parker for over 30 years.

View Complete Details

Ask Latest Price & Details

Discharge Bypass Valve
Get Best Quote

Get Best Quote
Get Best Quote

Tell Us What are you looking for? Will call you back

Contact Us

Pooja Kavilkar (Parker Hannifin India Pvt, Ltd)
Plot EL-26, TTC, MIDC, Industrial Area Mahape, Navi Mumbai, Maharashtra - 400709
Share us via
Found Something Wrong with this Listing? Report Here.