Kolkata, West Bengal, India
Our Products
Pathak Engineering and foundry works a leading, fly press manufacturer in India. Following is our list of different types of presses like Single Sided Fly Press, Double Sided Fly Press, Arbour Press.
| No. Size | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | ||||||||
| INCH | MM | INCH | MM | INCH | MM | INCH | MM | INCH | MM | INCH | MM | INCH | MM | INCH | MM | |
| Base to Guide | 4 ½ | 114 | 5 | 127 | 5 ¾ | 146 | 6 ¾ | 171 | 7 ¼ | 184 | 8 | 204 | 9 | 229 | 11 | 279 |
| Centre to back | 3 | 76 | 3 | 76 | 3 ¾ | 95 | 4 ½ | 114 | 4 ¾ | 146 | 5 ¼ | 133 | 6 | 152 | 8 | 203 |
| Diameter of Screw | 1.7 /16 | 37 | 1.11 /16 | 43 | 1.13 /16 | 43 | 1.13 /16 | 46½ | 17 /8 | 48 | 17 /8 | 48 | 23 /8 | 60 | 3 | 76 |
| Hole Through Base ( Without Ring) | 1 ¾ | 44 | 2 | 51 | 2 ½ | 64 | 3 | 76 | 3 ½ | 89 | 4 | 102 | 4 ½ | 114 | 6 | 152 |
| Hole Through Base ( With Ring) | – | – | – | – | – | – | 1 ½ | 38 | 1 ¾ | 44 | 2 | 51 | 2 ¼ | 57 | 3 | 76 |
| Stroke | 3 | 102 | 4 | 102 | 4 ½ | 114 | 4 ½ | 114 | 5 ½ | 139 | 5 ¾ | 148 | 6 | 152 | 8 | 203 |
| Hole in Ram (Dia) | ¾ | 19 | ¾ | 19 | ¾ | 19 | ¾ | 19 | ¾ | 19 | ¾ | 19 | 1 | 26 | 1¼ | 32 |
| Hole in Ram (Depth) | 1 ½ | 38 | 1 ½ | 38 | 1 ½ | 38 | 1 ½ | 38 | 1 ½ | 38 | 1 ½ | 38 | 2 | 51 | 2½ | 64 |
| Diameter of Flywheel | 28 | 229 | 18 | 229 | 19 ¼ | 260 | 21 | 536 | 23 | 587 | 23 | 587 | 29 | 739 | 32 | 813 |
| Height of the body | 19 ¼ | 484 | 19 ¼ | 484 | 21 ½ | 546 | 24 ¾ | 631 | 26 ¼ | 682 | 28 ¾ | 733 | 33 ¼ | 847 | 40 | 1016 |
| Total weight of Machine | 35 | 78 | 100 | 140 | 170 | 200 | 300 | 550 | ||||||||
The clutch is of Rolling key type & gives continuous strokes for mass production. Crank shaft is made of special Alloy Steel and fitted in with Gun Metal bushes for smooth
| 10 Tons | 30 Tons | 50 Tons | 75 Tons | 100 Tons | 150 Tons | 200 Tons | 250 Tons | ||
| Wed to Ram Bottom | mm | 203 | 254 | 305 | 356 | 406 | 432 | 483 | 610 |
| Bed | mm | 305*320 | 460*460 | 406*510 | 535*587 | 610*660 | 635*710 | 730*810 | 855*910 |
| Stroke | mm | 63 | 76 | 89 | 102 | 115 | 127 | 140 | 152 |
| Crank Shaft Dai | mm | 76 | 102 | 127 | 153 | 178 | 190 | 203 | 229 |
| Gear Dai | mm | 450 | 610 | 660 | 760 | 856 | 956 | 1120 | 1270 |
| Fly Wheel Dai | mm | 555 | 710 | 865 | 965 | 1015 | 1120 | 1325 | 1425 |
| Hole in Ram For Die Clamping | mm | 25 | 28 | 32 | 37 | 44 | 50 | 50 | 63 |
| Floor to top of Bed | mm | 635 | 762 | 762 | 762 | 762 | 762 | 762 | 813 |
| Over All Height Without Motor | mm | 1473 | 1651 | 1980 | 2133 | 2387 | 2590 | 2793 | 3175 |
| Floor Area Required | mm | 762*635 | 901*672 | 990*799 | 1041*825 | 1270*1016 | 1371*1056 | 1409*1078 | 1510*1053 |
| No of Strokes Per Minute | mm | 70 | 60 | 55 | 50 | 40 | 35 | 30 | 28 |
| Motor Power Required in HP | 2 | 3 | 5 | 5 | 7.5 | 10 | 15 | 20 | |
| R.P.M Required | 1440 | 1440 | 1440 | 1440 | 1440 | 1440 | 1440 | 1440 | |
| App. Wt. In | Kgs. | 800 | 1200 | 2000 | 3100 | 4200 | 6000 | 9000 | 11000 |
