Kolkata, West Bengal, India
Our Products
| PDH No. | Length of Bolt | Dia of Bolt | Production R.P.M. | Motor H.P. & R.P.M. |
| 1 | 1/2″ – 2″ | 3/16″ – 1/4″ | 60 – 70 | 3 x 1400 |
| 2 | 3 / 4″ – 3″ | 1/4″ – 3/8″ | 50-60 | 7.5 x 1400 |
| 3 | 1″ – 4″ | 5/16″ – 1/2″ | 40-50 | 10 x 1400 |
| 4 | 11/2 – 5″ | 3/8″ – 5/8″ | 30 – 40 | 15 x 1400 |
| 2″ – 6″ | 2″ – 6″ | 1/2″ – 3/4″ | 25 – 30 | 20 x 1400 |
| No | CAPACITY | PN-3 Mild Steel 45 Kg/mm’ | PN-5 Mild Steel 45 Kg/mm7 | PN-8 Mild Steel 45 Kg/mm’ | ||
| 1 | SHEARING STRAIGHT CUTTING | From the edge Inside with starting hole Sheet without Starting hole | mm mm mm | 3.2 3.2 2.5 | M- 5 5 4 | -Z- 8 8 6 |
| 2 | NIBBLING | From the edge Inside with starting hole Sheet without Starting hole | mm mm mm | 2.5 2.5 2 | 4 4 3 | 6 6 4 |
| 3 | RECTANGULAR NOTCHING | Sheet thickness / width of notch | mm | 2/8 | 3/10 | 4/12 |
| 4 | FIGURE CUTTING SLOT | Sheet thickness Sheet thickness / width of slot | mm | 2 | 3 | 9 |
| 5 | CUTTING | Sheet thickness Sheet thickness / width of slot | mm | 2.5/8 | 4/10 | 5/10 |
| 6 | LOUVER CUTTING | Sheet thickness Sheet thickness / depth of bead | mm | 225 | 3 | 4 |
| 7 | BEADING | Sheet thickness Sheet thickness / depth of bead | mm | 2/4 | 2.5/5 | 3/6 |
| 8 | FOLDING | Sheet thickness / depth of fold | mm | 2/6 | 2.5/8 | 3/10 |
| 9 | FLANGING | Sheet thickness / height of flanqe | mm | 2/8 | 3/12 | 3/15 |
| 10 | PUNCHING | Sheet thickness | mm | 1.5 | 2.5 | 3.0 |
| 11 | CIRCLE CUTTING OUTSIDE/INSIDE | Sheet thickness | mm | 2 | 3 | 5 |
Rigid, Interlock designed, heavily welded construction of MS plates and sections to take full load with minimum deflection. The arm is guided throughout its length by fiber guideways ensuring proper clean cut. A rigid clutch mechanism is provided for giving continuous strokes for production.
| Model | Over Crank | |||||
| HMT | O1250 | O2000 | O2500 | H2000 | H2500 | H3000 |
| Shearing Length MS | 1270 | 2050 | 2540 | 2050 | 2540 | 3100 |
| 1525 | ||||||
| Shearing Thickness for MS | 6/8 | 6/8 | 6/8 | 10/12 | 10/12 | 10/12 |
| Size of Blades | 1270×75×23 | 2050×75×23 | 2540×75×23 | 2050×100×23 | 2540×100×23 | 3100×100×23 |
| No. of Segments | 2 | 4 | 4 | 4 | 4 | 6 |
| Table Size | 425 | 425 | 425 | 425 | 425 | 425 |
| Height of Table | 800 | 800 | 800 | 800 | 800 | 800 |
| Max. Back Gauge Gap | 20-500 | 20-600 | 20-600 | 20-600 | 20-600 | 20-600 |
| Max. Front Gauge Gap | 600 | 750 | 750 | 750 | 750 | 750 |
| No. of Strokes Per Min. | 40/35 | 40/35 | 40/35 | 35/30 | 35/30 | 35/30 |
| Required HP/RPM (1440) | 10 | 15 | 20 | 25 | 25 | 30 |
We are one of the leading UNDER CRANK SHEARING MACHINE which is a statement in itself, these are designed through structural analysis technique which ensures scratch free production, high accuracy and repeatability. Interlock Shearing Machine which we manufacture are the most trusted and reliable machine in the market. Being one of the prime Shearing Machine Supplier in India, we know that quality assurance and customer satisfaction is a key to success for any business to grow and success.
| Model | Under Crank | |||
| HMT | U1250 | U2000 | U2500 | U3000 |
| Shearing Length MS | 1270 | 2050 | 2540 | 3100 |
| 1525 | ||||
| Shearing Thickness for MS | 3/4 | 4 | 4 | 4 |
| Size of Blades | 1270x75x 18 | 2050x75x 18 | 2540x75x 18 | 3100x75x 18 |
| No. of Segments | 2 | 4 | 4 | 6 |
| Table Size | 425 | 425 | 425 | 425 |
| Height of Table | 825 | 825 | 850 | 850 |
| Max. Back Gauge Gap | 20-500 | 20-500 | 20-600 | 20-600 |
| Max. Front Gauge Gap | 600 | 600 | 600 | 600 |
| No. of Strokes Per Min. | 50/55 | 45/50 | 40/50 | 40/50 |
| Required HP/RPM (1440) | 5 | 7.5 | 10 | 15 |
