Write a Review
Our Product / Services
We offer the best product range of Geared Radial Drilling Machine, PKM Horizontal Boring Machine, Milling Cum Drilling Machine, Semi-Automatic Radial Drilling Machine and All Geared Radial Drilling Machine.
| ase : |
| The Base is a one piece casting of heavy proportion and rigidly crossribbed on the underside to prevent any bowing effects under heavy loads. A reservoir for coolent is cast integrated with base.The "Tee" slots on the surface are machined and the surface is handscrapped. |
| Columm : |
| It is of a high Brinell Hardness number suitable for it's purpose. As there are no rotating joints there init is quite rigid. |
| Arm : |
| Automatic vertical movement of arm is provided with the direct coupled flange motor on the bracket, the lead screw will not rotate even while automatic movement will be in operation.Arm is adjustable to any angular position |
| Drill Head : |
| Drill Head is a mounted on The electric motor is directly mounted on drill head.Eight different speeds from 90 to 860 rpm.are obtained by changing levers.Automatic feed mechanism is provided for vertical traverse of Quill. |
| Spindle : |
| The Toughned spindle is made of high grade alloy steel is carried in pre loaded tapper roller bearings to absorb reverse trust and radial loads produced by drilling and boring. The spindle rotates and slides in a ball bearings The machine is supplied with two Electric Motors.Coolent pump, pipe fittings, Table Etc. Electricals are Suitable for 440 volts, 50 Cycles, 3Phase.A.C.Supply. |
| Drilling capacity in cast - iron | 75 |
| Drilling capacity in Mild steel | 70 |
| Quill Movement (Available in 225 mm) | 375 |
| Maximum Center distance between column & Spindle | 1500 |
| Minimum Center distance between column & Spindle | 400 |
| Maximum Distance between Spindle & Base | 910 |
| Manimum Distance between Spindle & Base | 420 |
| Working Surface of base L x W | 1570 x915 |
| Working surface of table | 650 x 450 x 300 |
| Vertical traverse of Arm | 1000 |
| Column Diameter | 350 |
| Number of spindle speeds | 8 |
| Range of spindle Speeds | 90-140-160-255-300-470-540-860 |
| Number of spindle feeds (0.1 & 0.015 mm) | 3 |
| Taper in spindle | Morse taper No.5 |
| Center distance between foundation bolts | 1035 x 705 |
| Electric motor on Drill head | 2 HP / 1440 rmp |
| Electricac motor on Arm elevating | 5.H.FI 14 / .1 RPM |
| Dimension of base plate | 1990 x 1078 |
| Total height | 3030 |
| Approximate weight of machine | 3000 kgs. |
| Base : | ||||||||||||||||||
| The base is a one- piece casting of heavy propotion and rigidly Crossribbed on the underside to prevent any bowing effects underheavy loads. A reservoirfor coolent is cast integrated with base. The "Tee" slots on the surface is handscrapped. | ||||||||||||||||||
| Columm : | ||||||||||||||||||
| It is of a high Brinell Hardness number suitable for it's purpose. As there are no rotating joints there in it is handscrapped. | ||||||||||||||||||
| Arm : | ||||||||||||||||||
| Automatic vertical movement of Arm is provided with direct coupled flange motor on the Bracket the lead screw will not rotate even while automatic movement will be in operation. Arm is adjustable to any angular position. | ||||||||||||||||||
| Drill Head : | ||||||||||||||||||
| Drill Head is mounted on The electric motor is directly mounted on drill head. Eight different speeds from 90 to 860 rpm. are obtained by changing levers. Automatic feed mechanism is provided for vertical traverse of Quill. | ||||||||||||||||||
| Spindle : | ||||||||||||||||||
| The toughned spindle is made of high grade alloy steel is carried in preloaded taper roller bearings to absorb reverse trust and rdial loads produced by drilling and boring. The spindle rotates and slides in ball bearing.The machine is supplied with two Electric morors. coolent pump, pipe fittings, Table etc. Electricals are suitable for 440 volts, 50 cycles, 3 phase. A.C. Supply
|
| SPECIFICATIONS :: | In MM |
| Drilling capacity in cast - iron | 45 |
| Drilling capacity in Mild steel | 38 |
| Quill Movement (Available in 225 mm) | 170 |
| Maximum Center distance between column & Spindle | 1075 |
| Minimum Center distance between column & Spindle | 339 |
| Maximum Distance between Spindle & Base | 1130 |
| Minimum Distance between Spindle & Base | 310 |
| Working Surface of base L x W | 890 x 610 |
| Working surface of table | 450 x 300 x 300 |
| Vertical traverse of Arm | 860 |
| Column Diameter | 200 |
| Number of spindle speeds | 8 |
| Range of spindle Speeds | 90-140-160-255-300-470-540-860 |
| Number of spindle feeds (0.1 & 0.015 mm) | 2 |
| Taper in spindle | Morse taper No.4 |
| Center distance between foundation bolts | 1035 x 705 |
| Electric motor on Drill head | 2 HP / 1440 rmp |
| Electricac motor on Arm elevating | 0.5 HP / 1440 rmp |
| Dimension of base plate | 1380 x 760 |
| Total height | 1720 |
| Approximate weight of machine | 1050 kgs. |
| Shipping Dimension | L. 1820 x W. 800 x H. 1880 |
| Drilling capacity in cast - iron | 38 |
| Drilling capacity in Mild steel | 32 |
| Quill Movement (Available in 225 mm) | 610 |
| Maximum clearance spindle Nose to table | 750 |
| Maximum Clearance Spidle Nose to Base | 910 |
| Distance of column to spindle centre | 285 |
| Ram Diameter | 60 |
| Spindle Traverse | 300 |
| Spindle Hole Morse Taper No | Mt : 4 |
| Column diameter | 130 |
| Table Diameter | 535 |
| Table Traverse | 585 |
| Diameter of Vee Belt Pulley | 350 |
| Recommended RMP of Vee Belt Pulley | 300 |
| Number of Spindle Speeds | 8 |
| R. M. P. | 36 to 350 |
| Electric motive Power | 2 H.P. 1400 R.M.P. 440 Volts 3 Phase,50 Cycles |
| Total height | 1905 |
| Dimensions of base L * W | 880*650 |
| Approximate weight | 450 kgs. |
| Shipping Dimensions H*L*W | 1370*1070*860 |
As the usual hand feed is with the machine, the Automatic feed arraignment is provided. As the feed engagement handles are pulled out automatic feed is engaged.
| Spindle Gear Box : |
| The spindle gear box has 8 mechanical speeds from 90 to 885 RPM. The gears are made from steel. The totally enclosed 2 H.P. Motor is direct coupled with gear box. The levers for changing the speed are avoided by means of providing special gear system. The speed can be changed in the running. |
| Feed Gear Box : |
| The feed gear box has 2 feed, 0.05 7 0.1, for the vertical movement of the Ram. |
| Automatic Feed With Auto Stop : |
| As the usual hand feed is with the machine, the Automatic feed arraignment is provided. As the feed engagement handles are pulled out automatic feed is engaged. |
| Drill Spindle : |
| The Drill spindle is made from best quality steel. The taper roller bearing is inserted. |
| Drill head & Table Arm : |
| Both can be raised, lowered and turned round the columm. |
| SPECIFICATIONS :: | In MM |
| Drilling capacity in cast - iron | 40 |
| Drilling capacity in Mild steel | 32 |
| Distance of columm to spindle centre | 356 |
| Maximum clearance spindle nose to table | 965 |
| Minimum clearance spindle nose to table | 1435 |
| Ram diameter | 70 |
| Drilling Depth | 150 |
| Spindle hole Taper | MT 4 |
| Column Diameter | 170 |
| Dimensions of Table | 530 x 460 |
| Table traverse vertical | 655 |
| Head stock traverse vertical | 320 |
| Spindle feed | 90-140-160-250-325-500-575-885 |
| No. of feed for spindle traverse vertical 90.05,0.1) |
2 |
| Electric Motive Power required | 2 H.P., 400,440 volts, 50 C/s |
| Approximate weight | 900 Kgs. |
| Dimensions of base | 530 x 660 |
| Total Height | 1920 |
| Shipping Dimensions | L. 735 x W. 605 x H. 1995 |
Mr. Mukesh Panchal (Poly Kraft Machines)
A/26, swagat industrial Park 1, kujad-bakrol road, after Kanbha Bridge, bakrol, Ahmedabad, Gujarat - 382024
Share us via
