Presto Stantest Pvt Ltd

Box Compression Tester is a consistent tool to indicate the Compression strength of cardboard boxes so that it does not get deformed or crushed when stacked one above the other during storage or transit. Cardboard boxes are commonly stacked one on top of the other, during warehousing and storage. So, to ensure that they do not collapse during this, it is necessary to measure theirbox compression strength.It is based on the principle of measuring the maximum load that the material can withstand without breaking. This process is performed by applying a gradually increasing compression force to a sample until it fails usingBox Compression Tester.

Using the equipment, a force-deformation curve can be obtained. This curve helps us evaluate the resistance of a package. It is a reliable equipment that provides accurate information regarding the compressive strength and durability of the package. It enables manufacturers to choose a more resistant packaging and to ensure the contents of the package dont get damaged during stacking or transit.

Thus, corrugated boxes/cartons/paper packaging can be tested using Box Compression tester. It is widely used to determine compressive resistance, deformation and stacking capability of cartons and corrugated boxes.

Presto Melt Flow Index Tester is used for evaluating the flow properties of molten plastics or resins. The Melt flow Index of thermoplastic materials is defined as the rate of flow (in grams per ten minutes) of extrudates of molten resins through a jet of a particular length and diameter.

MODELMFI-DX

The term scuffing is the rubbing of two materials against each other. Scuff Resistance Tester is used to evaluate the rub resistance (i.e. the damage which has taken place through rubbing) of labels and general printed matter.

Scuffing refers to the process in whichtwo materials rub against each other. A Scuff Tester is employed to assess the rub resistance, which measures the damage incurred through rubbing, particularly on labels and general printed materials.

TheScuff Resistance Testerfacilitates the rubbing of two printed surfaces against each other, facing each other in the same plane, at a consistent speed and under constant rubbing pressure. Widely utilized in the Paper & Packaging industries, this tester aids in evaluating color transfer from printed or coated surfaces during rubbing tests.It is designed and produced according to ASTM Standard and measures the number of double strokes required to cause Fuzz (distortion of appearence) and Peel (actual rupture of the surface).

With the help ofScuff Tester, the manufacturers can easily ensure the best quality of printed products to the clients.

By using this scuff resistance testing instrument designed by the experts at, check the print quality of the materials and ensure accuracy every time you ship your products to the customers. This lab testing instrument comes with a motorized weight arrangement on the plunger for noise-free working. It will firmly hold the testing specimen by its circular clips/clamps and comes with a motorized geared system for scuff movement.

This highly accurate lab testing instrument will easily measure the rub-proofness of materials, printed paper, carton packages, and board. Besides this, users will get accurate and precise testing results under a uniform load with the use of this high-quality lab testing instrument. Its user-friendly electronic controls and ergonomically designed features make it easy for paper and packaging product manufacturers to conduct scuff resistance tests on the materials.

Presto is a leadingscuff testermanufacturer and provides the best scuff tester price to clients. It comes with a motorized weight arrangement on the plunger for noise-free working. With its user-friendly electronic controls and ergonomically designed feature, users can accurately conduct scuff resistance tests on the materials.

Purchase a Scuff Tester from Presto Group, the leading manufacturer of print durability testing equipment. Get the best price and top performance from a trusted supplier today.

Peel Strength Tester is a consistent tool to quantify the permanence of adhesion or peel ability of self-adhesive pressure sensitive materials.

Peel strength testing is important in the evaluation of adhesive bonding of materials in various industries. It will determine the force required to peel two materials apart from each other, which can provide information about the adhesive strength and the quality of the bond between the two materials.

Thus, to test the peel strength of the materials, we at Presto have designed a high-quality lab testing instrument known as a peel strength tester. This quality testing equipment will accurately assess the peel adhesive material and quantify the permanence of adhesion. It is is manufactured under test standard ASTM D 903, ASTM D3330 , ASTM F88 and ASTM F904.

Presto is a leading peel tester manufacturer and offers this quality testing instrument at the best and most affordable price. This lab testing instrument is designed to deliver highly accurate results under force, ensuring that the measurement is both reliable and repeatable.

The strong gripping clamps are specially designed to perform peel tests at 180 degrees, which is the standard angle for most peel tests. The Presto Peel Adhesion Tester also comes equipped with an inbuilt calibration facility, which allows for easy and quick calibration of the instrument to ensure the accuracy of the results. This feature ensures that the tester always delivers precise and reliable data, providing peace of mind to the user.

The Drop Tester (As per IS:7028 Pt IV) is a useful equipment for ascertaining the transport worthiness of corrugated & solid fiber boxes and shipping containers. It has provision with angular drop arrangement to help accurately ascertain the transport worthiness of the package from all angles.

The Drop Tester, compliant with IS:7028 Pt IV standards, proves to be a valuable apparatus for assessing the transport suitability of corrugated, solid fiber boxes, and shipping containers. Featuring an angular drop arrangement, it ensures a precise evaluation of transport worthiness from various angles. drop test machine helps manufacturers in ensuring the integrity of packages by conducting accurate drop strength tests.

This Drop Tester machine is extensively employed across diverse industries to test and validate the strength of plastic bottles and corrugated boxes. Operating by dropping a test specimen from a specified height, it determines the specimen's strength. The testing equipment offers customization options, allowing it to be tailored to different specifications based on customer demands.

Thedrop strength testerhas been equipped with a guide mechanism that allows for the convenient uplift of the test platform. Additionally, it features a drop height adjustable clamp, making it easy to customize the drop height as per your testing requirements. This testing equipment has the ability to perform both straight and angular drop tests using a single instrument, providing flexibility in testing procedures. The strong base plate and rugged structure of the drop tester ensure stability and durability, making it a reliable choice for a variety of drop-testing applications.

Buy a Drop Tester from Presto, the trusted manufacturer for product safety testing. Get the best price from a reliable supplier and ensure product durability during transit.

The Presto Dart Impact Tester is used for determining the impact of a free falling dart on a plastic film. The energy of the falling dart causes the film to fail under specified conditions. The dart has a hemispherical head and is held by a strong electromagnetic dart holder.

The Presto Dart Impact Tester is used for determining the impact of a free falling dart on a plastic film. The energy of the falling dart causes the film to fail under specified conditions. The dart has a hemispherical head and is held by a strong electromagnetic dart holder. The dart is released from the holder at the press of a button. It can be dropped from variable heights.The Presto Dart Impact Tester is widely used by plastic film manufacturer for assessing the strength and durability of their plastic films and similar other products.

Presto Dart Impact Tester has been built on a rigid metallic base. It is highly recommended for evaluating the impact resistance and impact failure load of polyethylene films under specified conditions.

PRESTO Dart Impact Tester is widely used by plastic film manufacturer for assessing the strength and durability of their plastic films, flexible films, sheets and similar other products. Works according to both Method-A and Method-B of test standard.

The equipment has been given an autumn gray, and blue combination finish and the chrome/zinc plating ensures resistance to corrosion. The instrument comes complete with an instruction manual, electric wiring diagram and a calibration certificate traceable to NABL approved labs.

Plastic films are used in a variety of applications, such as packaging and automotive components. However, plastic films can be damaged by dart impact forces. Therefore, it is important for the packaging manufacturers to conduct thedart impact teston them and test the product quality. Presto being theleading manufacturer of dart impact testerswill ensure that your plastic films and other related materials can easily be tested against dart impact forces. This high-qualitylab testing instrumentis widely used in the packaging industry in order to test the puncture-resistant properties of plastic films and other related materials.

By conducting dart impact tests on the materials, manufacturers can easily ensure that the right quality of product will be delivered to the customers. Thisdrop impact testerhas been designed in accordance with industry standards that include IS 2508:1984(R2003), and ASTM D1709-16A. With its electromagnetic dart hold/release mechanism, one can easily test the dart impact resistance strength of the products with ease.

This lab testing instrument has been built on a rigid metallic base with a strong electromagnetic dart holder. Users can easily conduct the dart impact test on the materials and get reliable and accurate testing results. With its clamping shield height adjustable collar feature, the users can easily adjust the height of the clamp and conduct this quality test on the materials with ease. Presto offers the bestdart impact tester priceto our clients and ensures that users can accurately conduct this quality test and deliver quality products to the customers.

Purchase a Dart Impact Testerdirectly from Presto, the premier manufacturer of impact testing equipment. Buy now at a competitive price from a leading supplier.

Presto Vacuum leak detection system is now available in Prima series. With HMI Touch Screen Display and fully automatic controls one can ensure accuracy with repeatability and take data acquisition for the various tests. It is capable of testing both Bottles/containers and other packages. The testing medium can be air. It is the best instrument for accurate and quick testing of small to medium sized containers or packages.

Hot Air Oven is a unique test cabinet designed to detect the change in the physical characteristics of the material and to ascertain the actual working life of testing device at elevated temperature. Works on Forced air circulation, thermal convection principle, suitable for Tests like heat deformation, compression set, heat resistance required in rubber and plastic industries.

The Hot Air Oven serves as a distinctive testing chamber crafted to identify alterations in the physical attributes of materials and gauge their actual operational lifespan under elevated temperatures.

Thehot air oven principleis based on the forced air circulation and thermal convection, this oven conducts a range of tests, including heat deformation, compression set, and heat resistance crucial in the rubber and plastic industries. Equipped with an air circulating fan, the Hot Air Oven ensures efficient heating maintenance. We provide highly standardizedhot air oven specificationsthat makes it easy for the users to conduct quality tests on the materials.

Presto Laboratory Hot Air Oven proves versatile in assessing the impact of elevated temperatures on diverse materials such as rubber, textiles, yarn, plastic, metal, and paper. As a result, it finds extensive application in testing heat resistance and heat deformation across industries like rubber, paper, textiles, yarn, and various other sectors. To know about thehot air oven price, you can contact with our team of experts.

The Presto Hot Air Oven is a reliable and time tested instrument. The exterior has been given an autumn gray and blue combination finish and the chrome/zinc plating ensures resistance to corrosion.

The Presto Laboratory Hot Air Ovencomprises of a double walled chamber, wherein the inside wall is fabricated using heavy stainless steel and the outside wall is made of duly powder coated mild steel. Impartial mineral glass wool is incorporated within the walls to ensure that the chamber is well insulated. A special T/P action ensures that the temperature does not overshoot the designated level.

The instrument comes complete with an instruction manual, electric wiring diagram and a calibration certificate traceable to NABL approved labs.

The PRESTO Box Compression Tester Computerised is a compact Instrument with user friendly controls & software. Cardboard boxes should possess sufficient compression strength so that they do not get deformed or crushed when stacked.

This equipment is designed to measure ability of the Mini cartons or printed Duplex cartons to resist external compression loads during transit and storage It is important to evaluate the Compression Strength of the Box in order to make sure that the box will be able to resist the anticipated compressive forces and to determine the load that the box will be able to withstand during transit and storage. The cardboard strength and construction directly impact the amount of weight a box can carry. A box too weak might puncture or collapse. On the other hand, an excessive box means you pay extra for material and add to environmental wastage. PRESTO Mini Box Compression Tester is manufactured under various Test Standards ASTM D642, ASTM D4169, TAPPI T804, ISO 12048, and JIS Z0212

This equipment is designed to measure ability of the Mini cartons or printed Duplex cartons to resist external compression loads during transit and storage It is important to evaluate the Compression Strength of the Box in order to make sure that the box will be able to resist the anticipated compressive forces and to determine the load that the box will be able to withstand during transit and storage.

Presto has designed a high-quality box compression tester-NXT generation model that has built-in power isolation circuits that provide complete protection against accidental external spikes. It has an enlarged visual display for a better user experience. Besides this, it has been incorporated with a fully isolated communication interface and built-in power isolation circuits that provide the most complete protection against accidental external spikes.

Presto Moisture Meter PTM-2020 is the latest high sensitivity hand held moisture meter developed specially for the packaging industry. The portable moisture meter is used for measuring the moisture content of paper, corrugated sheets, cardboard stocks, kraft paper, paper tubes & paper bales, quickly and effectively.

The force required for bursting or complete rupture of the board is measured through a Digital Indicator. The bursting strength defines the material's quality as compared to the others. Bursting Strength Tester Genie 2.0 provides a hydraulic pressure on the sample.
In the PrestoBursting Strength Tester, a hydraulic pressure is applied on the sample under test, using a neoprene diaphragm, on a circular area. So, a circular piece of the sample of the corrugated board is used for the test. A digital indicator with a range of 0 to 40 kg/ square cm, is utilized for the equipment.

Bursting Strength Tester Genie Smart 3.0 is a reliable index of measurement of strength and performance of materials like paper, paper boards, corrugated boards and boxes, solid fiber boards, filter cloth, industrial fabric, leather and Rexene.

Bursting Strength Tester is a reliable index of measurement of strength and performance of materials like paper, paper boards, corrugated boards and boxes, solid fiber boards, filter cloth, industrial fabric, leather and Rexene. With the help of a bursting strength tester, industries can ensure the best quality of products to their clients. Presto is one of the leading manufacturers of Bursting Strength tester.

Bursting Strength Tester - Digital Pneumatic is provided with digital display and pneumatic clamping system for determination of bursting strength of paper, paper-board, solid fiber board and corrugated board and boxes. The equipment is widely.

Bursting Strength Tester - Digital Pneumatic is provided with digital display and pneumatic clamping system for determination of bursting strength of paper, paper-board, solid fiber board and corrugated board and boxes. The equipment is widely used to get the fast and accurate test results, by use of a single instrument.

The Electronic Bursting Strength Tester provides rapid test sequence through coordinated automatic controls for clamping and testing cycles.

An electronic pressure transducer provides a high level of accuracy and excellent reproducibility of test results.

The digital display is built on a state-of-the-art robust circuitry platform to ensure repeated performance after years.

Bursting Strength Tester - Digital Pneumatic with Printer is the high-end model for estimating bursting strength of the materials like paper, corrugated fibre board, cloth, foil, etc. It is equipped with a thermal printer to print the observation immediately for future use. The machine is designed with pneumatic clamping to avoid any slippage of the sample.

Prestos Bursting strength tester - Digital Pneumatic with Printer is designed to measure the bursting strength of the paper, cloth, corrugated fibre, etc. This high-end model is designed with pneumatic clamping to ensure that there is no slippage of the sample. The hydraulic pressure is applied to the sample via rubber diaphragm. The medium of pressure is glycerin. The pressure is applied on the test sample until it ruptures. The pressure required to burst the sample is considered as the bursting strength. It is represented in kg/cm. It is equipped with a small thermal printer alongside to immediately print the test results.

It is measured by giving a hydraulic pressure through a rubber diaphragm on a circular area of the specimen of CBF under test conditions. The force required to burst or complete rupture of the board is measured through a Digital Indicator.

Paperboard and corrugated board are widely used across various industries. From packaging products to storage boxes, these lightweight materials have become an indispensable part of the packaging industry. However, testing these materials against bursting is an important aspect of quality control. Thus, we at Presto have designed a high-quality lab testing instrument known as Burst Dual Head for Paper and Board.

Checking the ink abrasion resistance of a printed material sometimes becomes an intricate task. A lot of precision is required to get the exact estimation. Presto has designed an innovative instrument to check the abrasion resistance of an ink when exposed to extreme conditions. This instrument is perfect for every industry that deals with printing or used printed materials.

Ink Abrasion Resistance Tester is designed specifically for measuring the resistance againstrubbing and scuffing. This instrument can be efficiently utilised for identifying the properties of the printed material against different physical condition. These conditions may lead to deterioration of the printed material. To make inks and printing technology withstand different conditions, abrasion tester can be used. It has noiseless application and ensures uniform load distribution throughout the test area. It can determine the quality of the ink and other photosensitive coatings. Bonding of ink with printable surface is put to test. Rub resistance describes the ability of printed material to withstand marking, scuffing or smudging during handling in conversion, packaging, distribution and use. It simulates a similar environment to test therub resistance on printed materials.

Prestoink abrasion resistance testerhas been made to test the ink abrasion resistance properties of materials like printed labels, packaging labels, stickers, etc. This high-qualitylab testing instrumentis designed as per industrial standards that includeASTM F 2497-05, ASTM D5264-98 & TAPPI T830 OM -11.It has been accurately designed to determine the quality of printed materials. Once you use this lab testing instrument to analyze the abrasion properties of materials, then you will be able to deliver quality material that can bear marking, scuffing, or smudging during shipping and storage.

Presto is a leadingink abrasion resistance testing instrument manufacturerand provides this high-quality testing equipment equipped with high-end features. Users can easily install and operate this high-quality lab testing instrument with ease. The rub mode embedded in this testing instrument is based on arc reciprocating movement. Presto offers reliableink abrasion resistance tester pricesto our clients.

Scuff Resistance Tester is a unique test instrument to determine the color transfer from printed or coated material against rubbing. Scuff resistance testing can reveal how well a material will hold up against abrasion, rubbing, and scratching. This information is critical in industries such as packaging and printing where there is a vast use of labels and other printed materials.

It checks the color transfer when one surface is rubbed against other when subjected to continuous rubbing under specified load. PRESTO Scuff Resistance Tester is designed as per standards ASTM F2497-05, BS 3110:1959

Scuff resistance testing can reveal how well a material will hold up against abrasion, rubbing, and scratching. This information is critical in industries such as packaging and printing where there is a vast use of labels and other printed materials.

Scuff testing of labels and other printed materials is used to determine their resistance to abrasion, scratching, or rubbing. This type of testing is essential for ensuring that the labels and printed materials can withstand handling and transportation without losing their legibility, durability, or aesthetic appeal.

It checks the color transfer when one surface is rubbed against other when subjected to continuous rubbing under specified load. PRESTO Scuff Resistance Tester is designed as per standards ASTM F2497-05, BS 3110:1959.

Other model available are Scuff Resistance Tester Digital Model.

Presto scuff resistance prima model has been designed with highly advanced features that make it easy for the printing product manufacturers to conduct scuff resistance tests on the labels, and other printed materials. This HMI-based touchscreen model will perform highly accurate lab testing results under a uniform load and with a specified diameter.

It comes with a pre-settable counter of up to 9999 counts built into the HMI, making it easy for users to keep track of the test progress. The blower with set counts and Auto/Manual operation adds to the convenience and efficiency of the instrument, making it an excellent choice for a range of scuff resistance testing applications. Manufacturers of the printing product industry can easily perform scuff resistance testing on the products with the help of this quality testing instrument.

Presto Edge Crush tester - Digital (ECT) is rugged enough for any production testing environment. It is the ideal testing equipment for paper making, packaging, quality inspection department and more.

TheEdge Crush Tester Digital (ECT) demonstrates robustness suitable for any paper and packaging production firm. It serves as the perfect testing instrument for industries such as paper making, packaging, quality inspection departments, and more. This digital ECT tester is valuable for assessing the potential compression strength of corrugated and solid fiberboard boxes by testing the paper and paperboard materials utilized in their production.

Edge Crush Tester/ Ring Crush Tester / Flat Crush Tester is used for accurate testing of paper, paper-board, solid fiber-board & corrugated board for ECT test and its components. The Edge Crush tester can also be used for performing compression test on all small packages.

The higher ECT value determined by the ECT tester depicts the rigidity of the CFB box. Hence, it may be used to compare the quality of the CFB board. It is also possible to determine the compression strength of the box (CFB) by using ECT tester with McKees formula i.e.Compression strength = k. ECT x T x Z

Where K= Constant

ECT = edge crush test value

T=Thickness of CFB board (wall thickness)

Z= Perimeter of the box i.e. (2 L + 2 W)

Testing the edge-wise compression strength of corrugated boxes or cardboards is important in determining whether the materials will be strong enough to withstand the rigors of shipping or not. Thus, to make it easy for the paper and packaging product manufacturers to conduct the edge-wise compression strength on materials, this high-quality edge crush tester has been designed by the experts at best price in Presto.

This digital model of Crush /RCT/ECT /FCT model is for a simple and accurate read-out on a digital display. It comes with electronic force measurement for the load and the key locks embedded in this lab testing instrument will help the users to prevent accidental or unauthorized resetting.

The microprocessor-based display has also been embedded for accurate testing results. With its strong gripping clamps, bright LED display, and other advanced features, one can easily test the edge-wise compression strength of the materials. It comes with an in-built calibration facility, users can get accurate testing results every time they conduct the test.

Purchase an Edge Crush Tester directly from Presto, the trusted manufacturer at competitive prices. As a leading supplier, we provide reliable testing equipment to guarantee packaging strength.

RCT/FCT/Edge Crush Tester is a consistent tool to measure the crush strength of cardboard boxes and packaging containers. RCT/FCT/Edge Crush Tester reveals the crushing resistance in unit Kg/Unit length. It is a rigid support type compression.

RCT/FCT/Edge Crush Tester is a consistent tool to measure the crush strength of cardboard boxes and packaging containers. RCT/FCT/Edge Crush Tester reveals the crushing resistance in unit Kg/Unit length. It is a rigid support type compression tester designed to perform TAPPI & ASTM material tests on corrugated board & paper. It is suitable to perform Ring Crush (RCT), Edge Crush (ECT) & Flat Crush (FCT) as per standards. It is a table top model.

It comes with Dual System viz.

1) Digital Display (Incase computer is not used/available)

2) Inbuilt hardware & software CD.

RCT/FCT/Edge Crush Tester Digital is a consistent tool to measure the crush strength of cardboard boxes and packaging containers. PRESTO RCT/FCT/Edge Crush Tester is manufactured under Test Standard IS 7063.

The Ring Crush, Edge Crush, Flat Crush Strength tester measures the rigidity of CFB on edgewise. The Presto RCT/FCT/EDGE Crush Tester is a digital model used to determine the resistance of various materials like corrugated boxes, cartons, etc. against crushing and deformation. This testing equipment is widely used in the paper and packaging industry and provides the accurate value of edge crush, flat crush, and ring crush tests.

The digital model of the Presto RCT/FCT/EDGE Crush Tester comes with a user-friendly interface and a microprocessor-based display for accurate testing results. It will accurately display the compression strength of the test specimen and has separate fixtures for ring crush, edge crush, and flat crush tests.

It comes with separate fixtures for ring crush, edge crush, and flat crush tests. This allows for precise and accurate testing of each type of crushing resistance, ensuring reliable test results for a range of materials.

This model comes with several key features that make it a reliable and efficient testing instrument for quality control testing. In addition, the instrument features highly accurate test results under compression force, ensuring consistent and reliable data for quality control purposes. This is further enhanced by the strong gripping clamps that firmly hold the material in place during testing.

The Presto RCT/FCT/EDGE Crush Tester digital model also features a bright LED display that shows real-time data during testing. This display allows for easy monitoring of the test process and provides clear, accurate data for analysis.

Another useful feature of this model is its inbuilt calibration facility, which ensures accurate and consistent results over time. Besides all, the instrument's feather touch controls make it easy to operate, even for users with limited experience. Presto is a leading manufacturer of RCT/FCT/EDGE Crush tester digital models.

The edge crush test is one of the common quality tests that will be conducted on the material to ensure that your product will be able to withstand edge crush force. Presto has recently introduced an edge crush-Prima model that has designed this equipment with an automated Human Machine Interface. This lab testing instrument has been designed with a stable and practical mechanical structure with uniform movement over 90 alignments. It has been installed with a thermal printer that can instantly print the test result without the hassle of cartridge refill.

The Presto newly launched motorized model of core compression tester has been designed for measuring the compression strength of paper cores such as winding rolls of plastic films. It is a highly accurate and reliable laboratory testing instrument that features a powerful motorized mechanism to determine the core strength of materials.

It comes with an inbuilt calibration facility, which ensures that this testing instrument will provide highly accurate lab testing results. The motorized system is maintenance-free, making it a reliable and long-lasting laboratory testing instrument in the paper and packaging industry.

Heat Sealer is a consistent tool used to perform sealing on flexible packaging products and other thermoplastic materials using pressure and heat by maintaining high temperatures.

Heat Sealer Prima is a consistent tool used to perform sealing on flexible packaging products and other thermoplastic materials using pressure and heat by maintaining high temperatures. A heat sealer is used to measure the heat seal performance of composite films, plastic films such as PP, PE used in packaging different food products such as milk powder, instant noodle, food, washing powder, and drugs.

The Presto (Pneumatic Model laboratory) Heat Sealer is widely used in the plastic industry. The temperature of the Presto Heat sealer is also adjustable. The instrument has been provided with Digital Display and is Microprocessor based.

Both the upper and lower jaws of the Presto Heat sealer are heated separately with separate temperature sensors and controllers. Thus, it is possible to maintain both jaws at different temperatures. It is even possible to switch off one heater, while keeping the other on.

The quality of the paper and linear boards is determined by its resistance to bending. Presto's stiff resistance tester is designed to test the quality of paper by estimating its resistance. This decides the economic value of the paper. The instrument complies with the testing standards of TAPPI - T489 OM-08. This is the perfect instrument to measure the flexural rigidity of the paper and linear boards or paper boards.

To test the quality of the paper and decides its economic value, paper stiffness tester is used. The ability of the paper and paper boards to resist the bending is measured using this instrument. To perform the test, the specimen is mounted on the tester using the clamping system. The lower faces of the clamp jaws are the centre of the rotation, it is located on the pendulum. This assembly makes sure that the test and angle of deflection are constant for accurate test results. To start the test, the load is applied on the lower end of the specimen. Irrespective of the thickness of the sample, the jaws make sure that it precisely placed in the centre.

Crease Stiffness Tester is a multi-function stiffness tester, mainly used for measuring cardboard, color box (such as cigarette case cosmetic box) of the indentation force (that is, 90 crease of the rebound force), can also measure a variety of cardboard Bending stiffness is achieved on the same instrument with two measurements: 15 flexing Degrees and 90 crease stiffness.

Crease Stiffness Testeris a multi-function stiffness tester, mainly used for measuring cardboard, color box (such as cigarette case cosmetic box) of the indentation force (that is, 90crease of the rebound force), can also measure a variety of cardboard Bending stiffness is achieved on the same instrument with two measurements: 15 flexing Degrees and 90 crease stiffness.

Presto has recently introduced a crease stiffness HMI tester to test the crease resistance and board stiffness of various products like carton board, paper, printing, and packaging materials. The board stiffness and crease recovery are critical in the performance of cartons, especially on high-speed packaging machines and manual folding. The value of crease stiffness is technically important in the folding of carton blanks, most importantly during the release and closure.

PRESTO Round Cutter for Grammage GSM Round cutter is useful for precise circular cutting to check the grammage of samples. The sample cutter cuts out a circular specimen of 100? Which is exactly 1 / 100th of a square meter, rapidly and accurately.

Paper and its related products are widely used in the paper and packaging industry to deliver accurate products to customers. Thus, to make it easy for the paper products manufacturers to test their material effectively, we at Presto have designed a paper board cutter. This is one of the amazing lab testing instruments that has been designed to effectively cut the samples for conducting edge crush tests on the materials.

Paper and its related products are widely used in the paper and packaging industry to deliver accurate products to customers. Thus, to make it easy for the paper products manufacturers to test their material effectively, we at Presto have designed a paper board cutter. This is one of the amazing lab testing instruments that has been designed to effectively cut the samples for conducting edge crush tests on the materials. It has been equipped with singe beveled blades according to the Billerud standards.

The Digital GSM balance is one of the highly effective and accurate laboratory testing equipment that is used to measure the weight of materials including paper, paperboard, solid fiberboards and corrugated boxes. This paper gsm checking machine ensures that users can get precise testing results for testing the grammage of products.

The Digital GSM balance is one of the highly effective and accurate laboratory testing equipment that is used to measure the weight of materials including paper, paperboard, solid fiberboards and corrugated boxes. Thispaper gsm checking machineensures that users can get precise testing results for testing the grammage of products.

Presto has the complete range of Electronic Balances and Weighing scales for various applications of Paper & Packaging Industries. This paper GSM tester accurately measure and directly indicates paper quality in terms of grams/sq. Meter. Digital GSM balance or weighing balance will provide accurate results when connected with adaptor. This testing equipment will run in 240V A.C. supply to ensure accurate and reliable lab testing results.

PrestoGSM testing machineis widely used in the paper and packaging industry to test the grammage of your samples accurately. With the help of this paperGSM testing machine, manufacturers can easily test the durability of products against wear and tear. This tabletop model of grammage checking balance comes with high accuracy with the aluminium pressure die cast on the main body.

It has a lightweight and resilient structure that makes it easy for manufacturers to conduct quality tests on the materials. This paper and fabricGSM testing machinecomes with a safety latch facility that makes it easy for the manufacturers to conduct quality tests on the materials. If you want to know about theGSM testing machine priceor any other related information, then you can consult with our team of technical experts. We will assist you regarding all your needs and queries.

The Presto grammage checking kit comprises of the GSM round cutter along with Digital weighing balance. GSM round cutter with imported industrial blades gives you a very accurate & seamless cutting of your samples.

Vibration simulation is an efficient and cost-effective way of determining damage caused by the repetitive movement in the vehicles. In just a few hours we can pinpoint potential damage areas in your package or product caused by vibration.

OurVibration Tableis customizable. You can get a Digital, Computerised, or touchscreen Vibration table according to your sample testing needs! Be it swivel, synchronous, or asynchronous, test your sample to its fullest to ensure durability, long life, and zero rejections.

TP310 is a prominent color measurement instruments used in many mainstream industries which have been designed and manufactured by competent engineers and scientists of Testronix. The instrument has many advantages of other international standard color measurement instruments.

TP310 is a prominent color measurement instruments used in many mainstream industries which has been designed and manufactured by competent engineers and scientists of Testronix. The instrument has many advantages of other international standard color measurement instruments. The product has undergone thousands of tests to provide affordable, accurate and stable testing to the customers.

The TP310 is a portable and high quality color measurement instruments works with color sensor with multiple channels of international standards. It is also provided with highly stable IC platform and an efficient algorithm that provides highly accurate and fast test results for color quality control management to the users. The instrument has an ergonomic design which facilitates easy operation of the equipment and has been applied on a number of other patents. It is a versatile and multifunction color measurement instruments which is easily available for the users at very competitive prices.The product has undergone thousands of tests to provide affordable, accurate and stable testing to the customers.

Theportable color measurement instrumentis used to measure the color consistency of various types of products and is designed for many production verticals like plastics, rubbers, paper & Packaging, paint & plating, automotive, textile and many more. Thetesting deviceis user-friendly and offers highly reliable and accurate test results. Presto Stantest is an authorized dealer of Testronix Instruments.

The Farbung TP110 is a highly used and preferred color measurement instruments in many industries. There are several new features that are added to the product by the highly competent team of engineers and scientists of Testronix.

The Farbung TP110 is a highly used and preferred color measurement instruments in many industries. There are several new features that are added to the product by the highly competent team of engineers and scientists of Testronix.Precision Color Matching TP110is a consistent tool useful for portable and high-quality color measurement. It works with a color sensor with multiple channels according to international standards.

The Presto Color Matching Cabinet Spectrum Asia II is one of the widely used lab testing instrument in the industries and laboratories where it is important to maintain the color consistency of the products. This color matching machine will provide accurate assessment of colors under standardized environment for evaluation and visual assessment of colors.

Plastic films are widely used in the packaging industry due to their flexibility, durability, and non-reactive nature. These materials will be preferred by multiple packaging manufacturers to deliver their products accurately to the customers. Testing these films against freely-falling darts is the quality process that every manufacturer needs to follow in order to assure the quality of these films. Thus, we at Presto have designed one of the high-quality lab testing instruments known as dart impact tester Robo 2.0. Presto is a leading manufacturer of dart impact tester and provide this lab testing instrument at best price.

This new technology dart impact tester model has been designed with high-end features like circular annular clamping devices for zero slippage and a strong base plate with a rugged structure. This lab testing instrument will highly be used in the plastic and packaging industry to conduct the dart impact test on materials like aluminum foils, plastic composite films, and paper and paper boards.

Coefficient of Friction Tester is a consistent tool to indicate the starting and sliding friction of plastic films and sheets when sliding over itself or other substance at specified test condition.

PRESTO Coefficient of Friction Tester is manufactured under various Test Standards ASTM D618, ASTM D 883, BS 2782, TAPPI 815, TAPPI T549and ASTM D 1894.

Packaging films are used to protect and preserve the contents of a package during shipping and handling. The COF of the film can affect how easily the package slides or moves during transit. If the COF is too low, the package may slide too easily, causing damage to the contents. If the COF is too high, the package may not move easily, making it difficult to handle and causing delays.

Thus, we at Presto have designed a high-quality lab testing instrument known as the coefficient of friction tester. This is one of the high-quality lab testing instruments that is used to test the frictional properties of different packaging materials and ensure that the products will not get damaged during shipping and transportation.

This testing instrument will accurately assess the stackability of plastic films and ensures that they will not get slipped during shipping and storage. Presto is a leading co-efficient of friction tester manufacturer and designed the digital model with the highest accuracy.

Tensile testing is an important process for evaluating the strength, ductility, and toughness of materials. By determining a material's Young's modulus, tensile testing can also provide information about a material's stiffness.

Presto's recently launchedTensile Tester Servois a versatile and powerful lab testing instrument that can be used to test the tensile strength of the materials. Testing the tensile strength of the materials will help the manufacturers to determine the mechanical properties of the materials that include elongation strength, yield strength, and other mechanical properties.

Presto comes with a new model of tensile testing machine with a COF tester. This testing machine is well designed with industry standards like ASTM D618, ASTM D 883, BS 2782, and ASTM D 1894. With the help of this testing machine, you can easily measure the tensile strength along with the co-efficient of friction of various products like plastic films, sheets, and rubber and paper.

The Tensile testing Machine is highly recommended for evaluating the tensile strength of products and materials. The equipment is based on the Constant Rate of Traverse (CRT) principle. It is equipped with an upper jaw and a lower jaw. UniversalTensile Testing Machineis a reliable piece of equipment which is widely used for checking tensile strength of a product/sample. One of the most common mechanical testing techniques used to determine tensile strength, this is a method wherein controlled tension is applied to a sample until it fully fails.

Thus, the material properties of the sample can be easily determined by this test. It involves measuring the force required to elongate a sample under test to breaking point. Using this test, manufacturers and quality managers are able to determine the core strength of their products.

Tensile tests are commonly used to measure the mechanical properties of plastics. The force required to break a plastic sample specimen is an indication of the material's strength, while the extent to which the specimen stretches or elongates to that breaking point provides information about its ductility.

Presto's newly launchedZeus Ultimo 3.0 tensile testing machineis one of the high-qualitylab testing instrumentsthat is used to test the tensile properties of the materials and help manufacturers test the breaking, tensile, and compression strength of various materials, components, and finished products.

By using this qualityUTM machineone can also evaluate the performance of different sets of materials and ensure that quality products will be delivered to the customers. By conductingtensile strength testson the products, the manufacturers will ensure the specimen's durability and elongation strength.

PRESTO tensile testing machine computerizedmodel will perform the test in two modes-as a stand-alone (digital control) machine or through computer control with software. ThisUTM machinecomes with reliable and easy-to-operate user-friendly software that can be useful in various industries like rubber, plastics, automotive, polymers, textiles, R&D labs, production, and material testing.

The gloss meter is available in different geometries to measure the specular reflection gloss of a surface or a material. The Gloss Meter Tri-angle is used to determine the gloss on a surface and measures the amount of reflected light.

Tearing Strength Tester is a consistent tool useful to determine the tearing strength of fabrics, plastic films and similar materials.

Tearing Strength Tester is the tensile force required to rupture a pre-slit sample under controlled test conditions. PRESTO Tearing Strength Tester is designed as per standards ASTM D1424-09(2013), ASTM D689, ASTM D1922, TAPPI T414.

The tester comes equipped with a range of advanced features that make it easy to operate, while also delivering reliable and precise test results.

One of the standout features of the Prima is its pneumatic specimen clamping system, which ensures a secure grip on the test sample during testing. The automatic release of the pendulum also makes the testing process more efficient, allowing for quicker and more accurate testing.

The rugged structure of the Prima is designed to withstand heavy use and is made from corrosion-resistant materials, ensuring durability and longevity. The one-touch operation of the Prima makes it easy to use and provides highly reliable lab testing results to the users.

The Prima also comes equipped with inbuilt calibration weights, which make it easy to maintain the accuracy of the instrument over time. Test results can be displayed on the configurable display, which can also be used to generate reports and analyze data.

The Digital Eco Vacuum Leak Tester is a cost-effective and efficient testing solution designed to enhance the quality control processes in your packaging applications. Crafted with exceptional precision, this laboratory testing equipment is tailor-made for the accurate detection of leaks in a diverse range of packaging materials. Proficient in examining a wide array of items such as foiled cups, gels, grains, cereal, bakery products, confectionery items, frozen foods, cheese, medical supplies, and pharmaceutical products, the Digital Eco Vacuum Leak Tester is your go-to solution. Whether you need a vacuum leakage tester for testing your food packets against vacuum leakage or you want to preserve the integrity of your packaging then you must go for our vacuum testing machine.

Cobb sizing tester is used for fast determination of the quantity of water absorbed by a paper or board in a given time. The Water absorptiveness (Cobb value) of a substance is defined as the mass of water absorbed in a specific time by a 1 sq. meter.

Cobb sizing tester is used for fast determination of the quantity of water absorbed by a paper or board in a given time. The Water absorptiveness (Cobb value) of a substance is defined as the mass of water absorbed in a specific time by a 1 sq. meter sample of paper, board or corrugated board, under standardized conditions.

Cobb Tester measures the amount of liquid penetration into a sheet of Paper, Cardboard or Corrugated Board. The Cobb sizing Tester consists of a cylindrical container clamped to a flat base with a flexible backing onto which the sample is placed.Cobb sizing tester provides a simple, standardized method for fast determination of the quantity of water absorbed by a paper or board at a given time.

Cone Crush Tester (Digital Model) is a highly proficient machine which is utilized for calculating the crushing strength of cardboard cones, paper tubes, bobbins and other core packaging material. The working mechanism of the instrument is based on the radial crush testing method.

Cone Crush Tester (Digital Model) is a highly proficient machine which is utilized for calculating the crushing strength of cardboard cones, paper tubes, bobbins and other core packaging material. The working mechanism of the instrument is based on the radial crush testing method. Unlike other crush testers, this machine is designed in such a way that the generated force is applied on 66% of the specimen surface. The machine offers such an accuracy level that even a minute collapsing point can be easily detected and recorded. The accurate detection is achieved using a Load cell and Microprocessor based digital indicator equipped with the testing device. The machine is operated with advanced digital controls with feather touch operations.

Puncture Resistance Tester is a consistent tool useful to determine the resistance to puncture of paper and paperboard. Puncture Resistance Tester is used to measure the resistance of paper, paperboard and other similar materials when.

Puncture Resistance Testeris a consistent tool useful to determine the resistance to puncture of paper and paperboard. Puncture Resistance Tester is used to measure the resistance of paper, paperboard and other similar materials when subjected to puncture and determination of absorbed energy.

Puncture resistance tester is a specialpackaging detection instrumentfor the determination of anti-puncture performance (namely puncture resistance) of Paper & Packaging materials. Resistance to puncture is an important parameter that determines quality of a wide range of materials - from thin papers to thick boards and similar materials.

The specimen is clamped on a fixture and is pierced with the help of a pendulum released from90 Degree position. The pendulum head is made pointed in a pyramid shape. Different weights are provided in the pendulum for different scales. A pointer is fitted in the pendulum which gives the reading in a calibrated scale.

The corrugated box may get an impact from the sharp corner of any article during handling and transportation. The same effect is simulated by the puncture resistance testing machine. The higher the corrugated box quality the better its puncture resistance value.

The Prestopuncture resistance testing equipmenthas been made with a high-quality rugged structure and corrosion-resistant main body. The microprocessor-based display has been embedded in this lab testing equipment that provides accurate testing results. Users can easily get an accurate view of the puncture resistance strength of the material. With its strong gripping fixtures for holding test samples, one can easily conductpuncture-resistant testson differentpaper and packagingmaterials. Presto is a leadingpuncture resistance tester manufacturerand offers the bestperforation tester priceto clients.

Presto's Hot Tack Tester is an extremely effective testing machine which is used to perform hot tack test and check heat seal performance of laminated films, plastic films, and other packaging products.

Perforation Tester is a consistent tool to quantify the perforation strength or tensile ability of perforated materials like pouches, thermoplastic films, paper & packaging. They are used after separation of two consecutive sheets.

The Rolling Ball Tack test helps to test the tack of any adhesive. The instrument is very easy to operate and very economical too. It measures the ability of an adhesive that rapidly adhere to another surface. The tester complies with various standard test methods.

The Rolling Ball Tack test helps to test the tack of any adhesive. The instrument is very easy to operate and very economical too. It measures the ability of an adhesive that rapidly adhere to another surface. The tester complies with various standard test methods provided by various standardization authorities to perform the tack test on a pressure sensitive adhesive.This lab testing equipment has been designed with high-quality industrial standards that includeASTM D3121-94.

In this type of test, a steel ball is permitted to roll down from a particular starting point in the grooved path which tends at a particular angle to the bottom of the test platform. The responsive pressure tape is affixed below the end of the path of the platform. The roll back attains maximum speed when moving down and roll on the tacky surface. The shorter the distance covered by the ball, the higher will be the tackiness of the adhesive and vice versa.

Elevated temperatures can have a significant impact on the physical properties of many materials. Either it can deteriorate the quality of the product or will lead to product damage. This can have a major impact on the performance of products and structures made from these materials. Thus, it is important for product manufacturers to test the physical properties of the materials at elevated temperatures so as to determine their quality.

Presto has launched a high-qualityHot air oven prima serieswhich is the most advanced and reliable testing equipment designed to detect the change in the physical characteristics of the material and to ascertain the actual working life of the testing device at elevated temperatures.

Balloon Burst Tester - Balloon Burst Test is a seal integrity test wherein an empty 3 side pre-sealed pouch is clamped on the 4th open side and air injected into it. The Presto balloon burst tester comes with a single push-button operation, making it easy to use and control. This testing instrument will automatically lock the sample under test within the selectable pressure range, eliminating the need for manual intervention.

You can increase pressure upto a certain pressure and check for leakages or you can keep increasing the pressure to measure the peak pressure before the pouch bursts.

The Presto balloon burst tester comes with a single push-button operation, making it easy to use and control. This testing instrument will automatically lock the sample under test within the selectable pressure range, eliminating the need for manual intervention.

It comes with a microprocessor-based display that provides accurate test results, making it easy to analyze and interpret the data.

Besides this, the Presto balloon burst tester has been built on a rugged design to provide trouble-free performance for a long time. With its single-push button, you can easily complete the operation and read the results in a digital readout. This amazing testing instrument will help to determine the seal integrity of materials.

The instrument delivers highly accurate test results under multidirectional pneumatic force, ensuring reliable and consistent testing results. In this way, you can easily conduct leak integrity tests on different packaging materials.

GELBO FLEX tester is valuable test in determining the resistance of flexible-packaging materials to flex-formed pinhole failures or measuring the flex durability of flexible barrier materials. The flexing action consists of a twisting motion followed, in most cases, by a horizontal motion, thus, repeatedly twisting and crushing the film. The frequency is at a rate of 45 cpm. Confirms to ASTM F392.

GELBO FLEX tester is valuable test in determining the resistance of flexible-packaging materials to flex-formed pinhole failures or measuring the flex durability of flexible barrier materials.

Food freshness, taste or flavor is deeply related to oxygen, Filling of inert gas and oxygen absorber into food package is absolutely imperative to keep food quality.

Food freshness, taste or flavor is deeply related to oxygen, Filling of inert gas and oxygen absorber into food package is absolutely imperative to keep food quality.

Salt spray test chambers or cyclic test chambers are widely used in the automotive and metal products manufacturing industry to conduct the corrosion resistance test of the surface coatings. This quality assurance test will be used to determine whether the product will survive for a longer time when exposed to corrosive conditions or not. Thus, to make it easy for the manufacturers of the paint, plating, and coating industry to determine the corrosion resistance properties of their surface coatings, we at Presto have designed this highly advanced Cyclic Test Chamber.

Salt Spray Chamber is made as per ASTM B117 and JIS 2371 which is used for conducting Neutral Salt Spray Test or NSS test on Meta Surface Coatings. It is used for checking the resistance of the coating towards corrosive environment. The Salt Spray Tester generates an accelerated form of Salt laden environment inside which the specimen are tested for its quality.

• Panel-type sample holding fixtures
• FRP hanging rods holding fixtures for thick samples
• V-Grooved tray for Fasteners

The Presto CASS Tester has been designed strictly as per the relevant standard to assess the ability of rust proofed components to withstand corrosion due to atmospheric conditions. It is Triple Walled (with glass wool insulation).

Cupping Testing Machine is a consistent tool useful for determining the drawability of sheet metal components and non-ferrous metal sheets. Accurate and reliable testing of adhesion, hardness, the porosity of coatings of paints or varnish in metal sheets.

Cupping Testing Machineis a consistent tool useful for determining the drawability of sheet metal components and non-ferrous metal sheets. Accurate and reliable testing of adhesion, hardness, the porosity of coatings of paints or varnish in metal sheets, strips, etc.

Humidity Chamber - Touch Screen with Data Logger is used for assessing the change in physical properties of the materials when there is a severe change in the environmental conditions like humidity. The machine is equipped with advanced touch screen panel and upgraded features. It comes with 3 coloured tower style alarm to alert the operator.

Humidity Chamber - Touch Screen with Data Logger is used for assessing the change in physical properties of the materials when there is a severe change in the environmental conditions like humidity. The machine is equipped with advanced touch screen panel and upgraded features. It comes with 3 coloured tower style alarm to alert the operator. It is a perfect chamber to simulate the high humid environment in the confined cabinet. It is equipped with the latest technology and high-end features to make test observation accurate and easy. The inner chamber of the machine is made up of high-grade stainless steel and outer chamber is made up of stainless steel. This ensures the corrosion resistance of the machine while ensuring the long life and low maintenance of the machine.

Programmable Temperature & Humidity Test Chamber is the latest technology designed for evaluation of material, product and component's behaviour and its tolerance level in harsh weathering conditions including temperature and humidity.

Programmable Temperature & Humidity Test Chamber is the latest technology designed for evaluation of material, product and components behaviour and its tolerance level in harsh weathering conditions including temperature and humidity.

The testing chamber can precisely generate the real-life environmental/climatic conditions in a controlled manner for the stipulated duration. It can deliver a faster assessment of products performance and helps in quality improvement. It complies with a wide range of global testing standards which are commonly used for industrial and medical products.

The most commonly tested products are electronic gadgets, home appliances, batteries, plastics, polymers, F&B-Packages, paper products, automobiles, automobile components, metals, building materials, consumer-durables, defence equipment, aerospace, etc.

With the advanced touch screen feature on Programmable Temperature & Humidity Test Chamber, the operator can easily program the test with setting temperature, humidity and time values for rounds of tests. One can have a clear view of the running test values on screen and use it further for assessment. The chamber constructed using high-quality material ensuring long-life working.

The PRESTO Water Bath Digital (Rectangular - Double Walled, Stainless Steel) is a digital equipment, wherein both the inside and outside are made of high-grade corrosion resistant Stainless steel. It is used to incubate samples in hot water at high temperatures required in textile and microbiology industries.

Hot Air Oven - Touch Screen is a time-tested instrument to assess the change in physical properties of the materials with the change in temperature. This is an advanced model with complete touch screen control and upgraded features. It comes with 3 colors tower style alarm to alert the operator.

Hot Air Oven - Touch Screen is a time-tested instrument to assess the change in physical properties of the materials with a change in temperature. This is an advanced model with complete touch screen control and upgraded features. It comes with 3 colors tower style alarm to alert the operator. For a successful product delivery, it is very important to the test the properties of the raw materials. This chamber is capable of simulating the real-life working conditions in a confined cabinet.

The machine is made up of high-grade steel with an inner chamber made up of stainless steel and external body made up of mild steel. This is highly corrosion resistant material which increases the shelf life of the product and reduces the cost of maintenance. Works on forced air circulation, thermal convection principle, performs various types of tests like ageing, heat deformation, compression set, heat resistance required in rubber and plastic industries. The Hot Air Oven comes with air circulating fan for maintaining heating efficiency. It is designed with double wool insulation and double door protection to keep the temperature of the chamber consistent throughout the test process. It is always advised not to open the chamber door immediately once the test process is over. Failure to do so would result in thermal shock to the sample. Let the chamber reaches the ambient temperature or so and then take the sample out for further analysis. The machine is supplied with calibration certificate which is traceable to NABL accredited labs.

Portable Spectrophotometer is an advanced colour measurement equipment designed by Presto Group. It is used for conducting a high complex colour inspection and matching the product colour with its masterbatch. Now you can order Spectrophotometer Color Matching in Bangalore, Karnataka. Just connect with our team and get your product supplied at your location.

The Spectrophotometer is also termed as TP 800 which is utilized by leading brands in various industries. It is suitable for testing plastic, paper, liquid, powder substances, or semi-liquid specimens. It can investigate the yellowness, whiteness, colourfastness and perform colour matching. The device is also very helpful in inventing new colours. It is equipped with a huge LCD screen which is used for setting test programs, and monitoring testing results. It can also generate comparison graphs. Also, it can show multiple test data on one screen. The devices are designed as per CIE, CNS, ASTM E313, AATCC, ASTM D1925 test standards. The colour codes are processed as per software programs. It can observe colour at distinct angles for same or different material. The range of the visible spectrum is from 400 to 700 nm. Equipped with a huge integrating sphere with the homogenization of rays. The optical geometry it uses is 45/0 geometry. Get Spectrophotometer Color Matching in Bangalore with advanced features and full technical support.

The Farbung TP110 is a highly used and preferred color measurement instruments in many industries. There are several new features that are added to the product by the highly competent team of engineers and scientists of Testronix.

The Farbung TP110 is a highly used and preferred color measurement instruments in many industries. There are several new features that are added to the product by the highly competent team of engineers and scientists of Testronix.Precision Color Matching TP110is a consistent tool useful for portable and high-quality color measurement. It works with a color sensor with multiple channels according to international standards.

Presto's pH Meter (LCD Display) is the basic bench top type model. It is provided with 2 points calibration, manual temperature compensation. The meter is suitable for education applications. It offers the accuracy of 0.05pH.

MODELPSPH-7100

Presto's pH Meter (LCD Display) is the basic bench top type model. It is provided with 2 points calibration, manual temperature compensation. The meter is suitable for education applications. It offers the accuracy of 0.05pH.

Prestos pH meter is a highly efficient and easy to use a testing device which is used to measure the pH of a broad range of solutions and chemicals. It is widely used to test the pH of liquid solutions. The instrument is provided with digital LCD display. The instrument complies with various standards that are introduced by different standardization authorities such as ASTM and JIS. The pH meter is supplied with the user manual along with the conformance certificate perceptible to approved laboratories. The testing machine is assembled with ATC i.e. automatic temperature controller to provide accurate pH under various temperature settings and weather conditions. The test device provides accurate test results.

Ultra Low Deep Freezer - Touch Screen is used for assessment of physical characteristics of materials like rubber and plastic at very low temperatures. It is a time-tested machine for environmental testing and simulation of severe environmental conditions.

MODELULT - 254 - Prima

Ultra Low Deep Freezer - Touch Screen is used for assessment of physical characteristics of materials like rubber and plastic at very low temperatures. It is a time-tested machine for environmental testing and simulation of severe environmental conditions. Equipped with CFC free refrigerants and air-cooled compressors, performs conditioning procedures required in rubber and plastic industries. The Ultra Low deep freezers come with washable condenser filters and aerodynamically shaped fan for maintaining cooling efficiency.

The internal chamber of the machine is made up of stainless steel and outer body is made up of mild steel. This makes the whole machine highly resistant to rust and increases the shelf life. The strong and sturdy body of the machines reduces the cost of maintenance considerably. The machine has aerodynamically shaped fans that ensure the consistent cooling throughout the machine. Apart from the fans, glass wool insulation is used to maintain the temperature of the chamber. It comes with tower styles 3 coloured alarm to alert the operator. The machine is made in strict accordance with ASTM testing standards. It comes with a calibration certificate traceable to NABL approved laboratories.

For tests on coatings for crack formation; breaking off; adhesion and elasticity. A bulge is formed in the sheet metal by a falling weight with a hemispherical end. The coating can be on the outside or on the inside of the bulge.

MODELPIR-68

Presto coating thickness gauge is the perfect instrument to use measure the expected life of coating. Widely used in paints and dry coating, it measures the dry film thickness very efficiently. Dry coating measurement is a very crucial prospect as it defines a lot about the process, cost and quality. Apart from that, the performance can be estimated in different working environments. It is a non-destruction form of testing and can be used for on-site inspection.

MODELTCT - F01

It is best way to check dry film thickness of non-magnetic organic coating on Ferrous substrates. Non-destructively measure thickness of non-conductive coating (Paint, enamel, rubber plastic etc.) on magnetic metal (iron) substrates.These are the ideal instruments to measure the coating thickness on metallic surfaces. As a magnetic method is used, so it can only be used to measure non-ferrous coating like steel. It is widely used in measuring the coating of used cars,

While selecting a coating thickness gauge, the important criteria is to check the accuracy of the device with respect to the test materials. The results get widely varied by the precision of the instruments and the skill of the operator. Prestos coating thickness gauge is designed with utmost precision and according to the testing standards.

Polymer products usually damage when exposed to various environmental conditions which are formed from the atmosphere. This directly affects the actual life of the product. Hence, it is necessary to test the quality of the polymers to calculate.

MODELPSPL 855

Polymer products usually damage when exposed to various environmental conditions which are formed from the atmosphere. This directly affects the actual life of the product. Hence, it is necessary to test the quality of the polymers to calculate their real life of the product when placed years outside. This can be done proficiently with the help of a testing instrument known asUV Light Accelerated Weathering Tester.ThisUV test machineis widely used to create simulated climatic conditions and to study the weather resistant properties of the material inside the laboratory. It has become a very effective method to measure the effect of environmental conditions on the products. Two models of Ultraviolet accelerated weathering testers are available namely,

• PSPL 855 ?It is a Basic Ultraviolet Light Accelerated Weathering Cabinet that does not provide irradiance control.
• PSPL 856 ?It is an Ultraviolet Light Accelerated Weathering Cabinet that offers Irradiance control along with the facility of automatic calibration.

Optional Accessories: UVB lamps (40w/313nm) / UVA lamps (40W/340nm)

Both PSPL 855 & 856 model are equipped with fluorescent UV lamp to provide the light source inside the chamber. The humidity and the temperature of the instrument can be controlled easily to achieve the periodic condensation on the test specimen to evaluate the damaging factor completely which are caused due to the moisture, sunlight, temperature and various material ageing phenomenon that includes intensity reduction, fading, cracking, flaking, cracking, oxidation and chalking. The Fluorescent UV light creates the effect of sunlight whereas the water spray and condensation creates the impact of dew and rain.

At the time of the test, temperature and radiation energy can be controlled easily. The difficult test cycle usually carries out under the strong ultraviolet radiations and in wet and dark condensation period having relative humidity 100 percent. These types of tests are generally performed in the field of automotive industry, paint, and plating industry, automotive industry, plastic, glue, wood industry, etc.

PrestoUV light accelerated weathering testerhas been made with an excellent control system with the latest HMI touchscreen that helps the manufacturers to conduct the test. The temperature settings along with preset timer functions have also been embedded in this UV Light Test Chamber which helps the manufacturers to conduct weathering tests on the specimen with ease. With its robust construction and easy-to-use operational features, one can easily test their sample under different testing conditions with this UV test chamber

Besides this, the UV lamps have also been embedded in this testing instrument that will help the manufacturers to stimulate short-wave ultraviolet light as a part of sunlight. Thisweathering test chamberhas been made in accordance with industry standards that include ISO 4892-3:2012, ASTM D4329-13, ASTM D4587-11, and ASTM G-151-10.

Users can easily perform the test easily with the help of this fully automatic UV Test Chamber. The UVA & UVB lamps will help to ensure the comparability of testing results. This highly accuratelab testing instrumenthas been designed with alarm and protection features with creep-age, water breaking, overloading, and over-temperature.

The inner cabinet of this testing instrument has been fabricated with stainless steel SUS 304 stainless steel material. This will help the manufacturers to conduct weather tests on the materials and ensure that this lab testing instrument will be used for a longer time. Presto offers the bestUV light accelerated weathering tester priceto clients.

Bench Ultraviolet light Accelerated Weathering Tester is very affordable and easy to use a machine which can easily meet all testing requirements related to weathering testing. It is a very effective testing instrument that helps to create natural.

MODELPBUAW - 852

Bench Ultraviolet light Accelerated Weathering Tester is very affordable and easy to use a machine which can easily meet all testing requirements related to weathering testing. It is a very effective testing instrument that helps to create natural weathering conditions inside the laboratory and fulfill the requirements of various customers. The device is equipped with 3 lamp lights of 20W each as light sources. The user can set the temperature, illumination time, spray time, etc. to create a natural environment inside the temperature which initiates natural damage factors on the test specimen. The instrument offers highly accurate and reliable test results.

The testing equipment comprises of 18 pieces of a standard panel of size 150 x 70mm. The samples are placed inside the chamber in a column from the rotating specimen rack. During the test procedure, the specimens rack revolves consistently and ensure that every specimen will get the same amount of irradiance energy that will enhance the repeatability and comparability of the test outcomes. The operator can control the machine with the latest touch screen feature. The instrument offers highly convenient and friendly windows where the user can view and measure any parameter between the test procedures.

To meet the testing requirements of various applications related to weathering tests, it is an ideal instrument which is fabricated with the corrosion proof stainless steel body which explains that the machine is designed simply and easy to maintain. Hence, in a very short span of time and at relative low cost, one can easily find out the damage that formed on the specimen due to various environmental conditions when placed years outside. The tester helps to analyze the difference in the actual specimen and the tested product.

Presto Scratch Hardness motorized tester is a suitable apparatus for conducting tests related to resistance to scratch under a specified load. The equipment can be used for a wide variety of products such as paints, lacquers and varnishes.

MODELPSHT-80

The company also offers a Presto Scratch Hardness motorized tester. It is a suitable apparatus for conducting tests related to resistance to scratch under a specified load. The equipment can be used for a wide variety of products such as paints, lacquers and varnishes. The Presto Scratch Hardness tester is highly recommended for the paint and plating industry and has been designed for repetitive use in small industries and laboratories, where quality control tests need to be conducted.

The motorized model has been specially designed as a more user friendly version of the standard Presto Scratch Hardness Tester. The scratch test is carried out either on a go/no go basis by testing at a single specified load on the Stylus or by increasing the load to determine the minimum load at which the coating can be penetrated. It is a durable and highly reliable instrument. The Presto Scratch Hardness tester strictly conforms to ISO standards and comes complete with instruction manual & conformance certificate.

The Presto Scratch Hardness tester is a suitable apparatus for conducting tests related to resistance to scratch under a specified load. It can be used for a wide variety of products such as paints, varnishes and lacquers.

MODELPSHT-40

The Presto Scratch Hardness tester is a suitable apparatus for conducting tests related to resistance to scratch under a specified load. It can be used for a wide variety of products such as paints, varnishes and lacquers. The Presto Scratch Hardness tester is highly recommended for the paint and plating industry and is specially designed for small industries and laboratories where repetitive quality control tests need to be conducted.

The scratch test is carried out either on a go/no go basis by testing at a single specified load on the Stylus or by increasing the load to determine the minimum load at which the coating can be penetrated. It is a durable and highly reliable instrument. The Presto Scratch Hardness tester strictly conforms to ISO standards and comes complete with instruction manual & conformance certificate.

Presto Conical Bending Mandrel is a laboratory apparatus to bend coated test panels over a conical shaped mandrel in order to assess the elasticity or resistance of a coating paint or varnish to cracking; elongation and / or detachment from a metal.

MODELPCBM-080

Presto Conical Bending Mandrel is a laboratory apparatus to bend coated test panels over a conical shaped mandrel in order to assess the elasticity or resistance of a coating paint or varnish to cracking; elongation and / or detachment from a metal test panel in accordance with ISO 6860 and ASTM D522.

The conical shape of the bending area allows the deformation of the test panel and examination of the elasticity range of a coating.

The Conical Bending MandrelTester is a compact, robust instrument made ofenameled steel which is suitable for table-top use. The conical mandrel and the pivoted pressureroller running parallel to the surface of the cone are made of stainless steel. The clamping device isequipped with a cam lever which ensures a rapid and uncomplicated change of specimens. The bending mandreltest is a commonly used testing method for assessing the flexibility and theadhesion properties of coatings when these are subjected to bending stresses.

The Presto muffle furnace is used to determine the ash content of a specimen. The percentage of ash in a material gives important insights into the properties of the substance. The Presto muffle furnace is specially designed as per IS & ASTM Standards.

MODELMF - 4 (900)

Presto's Muffle Furnace - HMI Prima series is used to measure the percentage of ash content in a particular specimen. The percentage of the ash in a sample offers vital insights into the properties of the material.

MODELMF - 4 (900) Prima

Prestos Muffle Furnace - HMI Prima series is used to measure the percentage of ash content in a particular specimen. The percentage of the ash in a sample offers vital insights into the properties of the material. The testing instrument is assembled as per the standards that are introduced by various standardization authorities like ASTM and IS.

To operate the testing machine, the desired temperature is set through the HMI based Touch Screen display which is provided on the bottom of the device, and this will heat the furnace automatically. The testing device is used in numerous applications like metal treatment, agriculture, medical research, rubber and wool industries.

Polymer materials are usually get damaged due to the natural environmental factors which form due to the atmosphere and earth's surface when it is used for years outdoor which directly affect the life of the products.

MODELPSPL - 867

Polymer materials are usually get damaged due to the natural environmental factors which form due to the atmosphere and earths surface when it is used for years outdoor which directly affect the life of the products. In order to measure the actual life of the polymers when placed years outside, Presto offers various environmental testing equipment to create natural climatic conditions of different types. These instrument helps to study the weather resistance of products when place under the different weather in the laboratory. It is the highly cost-effective method which is widely used to measure the quality of the polymers.

The accelerated weathering test provides two sources of lights namely Xenon lamp and Fluorescent UV lamp. Fluorescent UV lamps are used to create the ultraviolet part of full sunshine; hence it is comparatively difficult to get the reliable testing results all the time when samples are exposed. Additionally, the xenon lamps are used to evaluate the actual life of the polymers as these lamps offer higher feasibility. These lamps are completely filled with Xenon and send the lights because of xenon discharge. A xenon lamp offers stable spectrum distribution and provides an output in the form of steady light energy.

The machine is equipped with the water spray system which is used to create the natural effects of dewdrops and rain. The instrument is also used in various verticals like the automotive industry, paint, and coating industry, wood industry, plastic industry and many more.

The instrument offers the control panel to control the temperature, humidity, and temperature. The inner temperature of the cabinet is controlled to create required climatic effects on the test sample that are caused naturally due to moisture, sunlight, temperature, etc. that causes disluster, fading, cracking, intensity reduction, chalking, flaking tester, oxidation, and chalking.

If you are working in the plastics or polymer industry, then you should be aware that it is important for manufacturers to test the melt flow rate of these materials. The melt flow rate of the materials is considered to be the measure of the flow of polymers when it will be melted. The result of the melt flow rate will be reported as the weight of the polymer that will flow through the orifice in a certain period of time.

MODELMFI NEO - 2.0

If you are working in the plastics or polymer industry, then you should be aware that it is important for manufacturers to test the melt flow rate of these materials. The melt flow rate of the materials is considered to be the measure of the flow of polymers when it will be melted. The result of the melt flow rate will be reported as the weight of the polymer that will flow through the orifice in a certain period of time. To make it easy for you to conduct a melt flow test for polymers, we at Presto have come up with one of the amazing lab testing instruments known as MFI tester NEO 2.0. This amazing lab testing equipment is highly useful in testing the melt flow properties of molten plastics under various test standards ASTM D 1238-1992, IS 2267-1972, IS 2530-1963, IS 10810-1984.

The melt flow rate of the polymers is one of the essential properties of the materials that will help the manufacturers in determining the rate at which it flows. This property of the material is important as it provides the necessary data on the mass flow rate of the polymer. Thus, to test the melt flow properties of the materials, we at Presto have recently designed a high-quality Melt Flow Index Junior model.

MODELMFI - Junior

This highly versatilemelt flow index testermodel is a very accurate and reliable instrument for checking the melt flow properties of materials. The tester is easy to use and can be operated with great precision. It comes with a weighing balance and performs automatic cutting of samples.

The new-design MFR Model can quickly extrude the flow rate of molten resins utilizing the advanced setup of load, piston, and a metallic barrel. The specimen, majorly in granule form is put inside the barrel and the piston is inserted. Loads, as per requirement are placed on the piston and the parameters are then selected from the touchscreen display.

MODELMFI-MFR

The Presto Tensile Testing Machine is based on the Constant Rate of Traverse (CRT) principle. During the test, the sample is held between two jaws. The upper jaw is stationary, while the lower jaw is made to move at a designated fixed speed with the help of a motor.

MODELTTM-D (as per capacity)

Dual Lead Screw Based Model ensures stability while testing.The Presto Tensile testing Machine is based on the Constant Rate of Traverse (CRT) principle. During the test, the sample is held between two jaws. The upper jaw is stationary, while the lower jaw is made to move at a designated fixed speed with the help of a motor.

The motor is fitted with a gear Box and a lead screw arrangement (100mm or 200mm per minute). A sensor, connected with a load cell, senses the load exerted on the stationary jaw and directly indicates the reading in kgs (in digital format). The Presto Tensile testing Machine is fitted with special case hardened lead screws for stability and durability. The machine is equipped with a standard branded motor and CE standard electrical wiring. The completely modular construction of the Presto Tensile Testing Machine ensures trouble free maintainance and easy operation.

The frame of the Presto Tensile testing Machine is fabricated using heavy mild steel in order to ensure that it has the requisite rigidity and strength. The machine incorporates various built in safety arrangements such as over load and over travel protection.

The Presto Tensile testing Machine is finished in Autumn Gray & Blue combination painting. Further the bright chrome / zinc plating has been added to impart a corrosion resistant finish.

The Instrument comes complete with Instruction Manual; Electrical Wiring Diagram & Calibration Certificate traceable to NABL approved Labs.

Heat Deformation - HDT/VSP Tester is a consistent tool useful for determining the ability of a given polymer to bear load at elevated temperatures. Accurate and reliable deflection or deformation is an important component in the plastics industry.

MODELHDT/VSP-500

Heat Deformation - HDT/VSP Tester is a consistent tool useful for determining the ability of a given polymer to bear load at elevated temperatures. Accurate and reliable deflection or deformation is an important component in the plastics industry. PRESTO Heat Deformation HDT/VSP tester is equipped with indenter which indents the sample under specific load and offers heat deformation and Vicat Softening temperature of plastic or polymer materials. The deflection on the gauge is the measure of deformation of the test specimen.

The PRESTO IZOD/CHARPY IMPACT TESTER has been designed for assessing the impact resistance of plastics. Operated on the pendulum method principle, this equipment serves as a reliable instrument to gauge the impact resistance of materials when subjected to sudden falling force or impact. Users can accurately conduct charpy and izod test on the materials and ensure that accurate products will be delivered to the customers. The IZOD/Charpy Impact Tester stands as a consistent and indispensable testing equipment for accurately measuring the capacity of materials to withstand impact, contributing valuable insights into their durability and structural integrity.

MODELIZC -222

This specialized lab testing instrument is meticulously crafted to assess the impact resistance of plastics, and it will be operating on the pendulum method. It serves as a consistent and reliable testing machine for measuring the impact resistance of materials subjected to sudden falling force or impact. This lab tester encompasses two essential tests: Izod (horizontal impact on a vertically clamped specimen) and Charpy (vertical impact on the horizontally placed specimen).

This Izod/Charpy Impact test holds significant importance in the examination and evaluation of the impact resistance of diverse plastic products. The charpy and izod test precisely determines the energy required to fracture a standard test specimen using the pendulum method. A crucial asset for plastic testing laboratories and quality control departments, this highly reliable instrument unveils impact strength in terms of J/m, designed specifically to assess the impact strength of plastics.

Complying strictly withASTM D 256 -10 & ASTM D6110-10standards, the Presto Izod/Charpy Impact Tester (Digital) arrives complete with an instruction manual, electric wiring diagram, and a calibration certificate from NABL approved labs.The equipment comes complete with an instruction manual, electric wiring diagram and calibration certificate from NABL approved labs.

The IZOD/Charpy Impact Tester is a reliable and consistent testing instrument that is used for measuring the impact resistance of materials under sudden falling force or impact. Presto has designed a high-quality IZOD/Charpy Impact Tester NXG model that will easily reveal the impact strength of plastics and other related materials.

MODELIZC -222 NXG

This lab testing equipment has been designed with high-quality industrial standards that include ASTM D256-10, ASTM D618-13, ASTM D883-12, ASTM D1204-14, ASTM D1248-12, ASTM D6110-10and ASTM E691 14. This means users will get highly accurate test results. Presto is a leading IZOD/Charpy Impact Tester NXG manufacturer in India and provides this quality testing equipment at the best prices.Thislab testing instrumentcan be used to test for a variety of properties, such as toughness, ductility, brittleness, and strength. It is essential testing equipment for quality control.

Identifying the strength and durability of materials is of utmost importance to make sure that quality products will be delivered to the customers. Thus, if you are looking for a highly accurate lab testing instrument to identify the sturdiness of materials under sudden falling force or impact, then you must go with Presto Izod / Charpy Impact Tester Computerized model.

MODELIZC -222 (C)

The computerized model of this lab testing instrument has been manufactured under different test conditions that include ASTM D256 - 10, ASTM D618 - 13, ASTM D883 - 12, ASTM D1204 - 14, ASTM D1248 - 12, ASTM D6110-10and ASTM E691-14. Presto is a leading Izod/Charpy testing instrument manufacturer in India. We offer affordable prices for this lab testing instrument.

The PRESTO notch cutter is used for making a notch in the Izod / Charpy samples as per ASTM D 256-10, ISO 180. It is a sample preparation machine that prepares the sample for Izod Tester to test the plastic sheets.

MODELNC-22

Presto Carbon Black Dispersion Test Apparatus is mainly used for the determination of carbon black dispersion. It finds wide application in the plastic industry. The instrument comprises of a hot plate for sample placement.

MODELCBD - 501

Presto Carbon Black Dispersion Test Apparatus is mainly used for the determination of carbon black dispersion. It finds wide application in the plastic industry. The instrument comprises of a hot plate for sample placement.

The temperature range can be adjusted between ambient and 200 C. Presto Carbon Black dispersion Test Apparatus is fitted with a 6 inch size microscope with a magnification power of 100X and 450X. The instrument is manufactured as per IS 4984 & IS 4985 standards.

Presto Carbon Black Content Apparatus is commonly used for determining the Carbon Black content in polyethylene and polypropylene materials. The test is applicable only to samples where carbon is present in a free state.

MODELCBC - 165

Presto Carbon Black Content Apparatus is commonly used for determining the Carbon Black content in polyethylene and polypropylene materials. The test is applicable only to samples where carbon is present in a free state. According to standards, the Carbon Black content in the specimens is calculated by measuring the difference in the weight of the rest sample before and after treatment in the apparatus. The Presto Carbon Black Content Apparatus is designed as per ASTM D-1603 -14, IS 4984 and IS 2530 standards to determine carbon black content of plastics.

Presto Carbon Black Content Apparatus consists of tubular furnace fabricated using mild steel. The relatively low operating wattage of the heater ensures that the furnace is long lasting. It is fitted with an imported programmable P.I.D. controller to effectively control the temperature. The Presto Carbon Black Content Apparatus is equipped with a nitrogen flow meter and a full set of glass parts. Further there are two separate flasks to hold solid ice and the main combustion tube supplied with the apparatus are specially made of Quartz glass. Quartz glass can withstand much higher temperature as compared to hardened glass (borosil).

The Specific gravity of any elastomer is of considerable importance for its identification and can also be used for providing a rough assessment of its physical properties.

MODELSP 202 (G)

Humidity Chamber - Touch Screen with Data Logger is used for assessing the change in physical properties of the materials when there is a severe change in the environmental conditions like humidity. The machine is equipped with advanced touch screen panel and upgraded features. It comes with 3 coloured tower style alarm to alert the operator.

MODELPCC-900 Prima

Humidity Chamber - Touch Screen with Data Logger is used for assessing the change in physical properties of the materials when there is a severe change in the environmental conditions like humidity. The machine is equipped with advanced touch screen panel and upgraded features. It comes with 3 coloured tower style alarm to alert the operator. It is a perfect chamber to simulate the high humid environment in the confined cabinet. It is equipped with the latest technology and high-end features to make test observation accurate and easy. The inner chamber of the machine is made up of high-grade stainless steel and outer chamber is made up of stainless steel. This ensures the corrosion resistance of the machine while ensuring the long life and low maintenance of the machine.

This specializedhumidity cabinetis meticulously crafted to generate controlled temperature and relative humidity conditions within the chamber. Its primary objective is to identify alterations in the physical characteristics of materials, thereby determining the actual operational lifespan of the testing device. Aligned with industry standards such asASTM D1776, ASTM D1776M-15.Presto's humidity chamber utilizes environmentally friendly CFC-free refrigerants and air-cooled compressors. With its adept conditioning capabilities, this instrument accommodates the diverse needs of various industries. Boasting aerodynamically shaped fans, the Humidity Chamber ensures efficient heating, cooling, humidification, and dehumidification processes, creating an environment conducive to accurate environmental simulations.If you want to know abouthumidity test chamber pricethen you can simply contact us.

Buy a Humidity Chamber from Presto, the premier manufacturer of environmental testing chambers. Get the best price from a reliable supplier and ensure accurate testing results.

Humidity/Conditioning Chamber is a unique test cabinet designed to create temperature and relative humidity inside the chamber to detect the change in the physical characteristics of material and to ascertain the actual working life of testing device. PRESTO humidity chamber is designed as per standards ASTM D1776, ASTM D1776M-15.

MODELPCC - 800 Dx

Equipped with CFC free refrigerants and air cooled compressors, the instrument performs conditioning procedures required in various industries. The Humidity Chamber comes with aerodynamically shaped fans for maintaining heating, cooling, humidification and dehumidification efficiency and provides environmental simulations.

ThePresto Humidity ChamberDeluxe Model is a high-quality lab testing equipment that has been designed to meet your lab testing needs with precision. This chamber boasts an advanced alarm system that signals the test end process with a distinctive buzz sound, ensuring timely awareness.

The temperature monitoring is facilitated by a PT-100 sensor, guaranteeing accurate readings. By maintaining uniform temperature and humidity levels, this chamber consistently delivers highly reliable test results. Presto is a leadinghumidity chamber manufacturerand designs this quality testing equipment with highly advanced features.

Its digital control for both humidity and temperature empowers precise adjustments. The chamber's construction features high-grade imported puff insulation, which maximizes thermal efficiency. The integration of SSR-based heaters ensures efficient and controlled heating.

The digital preset timer with LED display simplifies operation, while the in-built auto-tuning function optimizes performance. A water level indicator adds to the convenience and functionality of this deluxe humidity chamber, making it an ideal choice for your lab testing instrument requirements.

Presto offers the besthumidity chamber pricefor manufacturers to conduct quality tests on the materials.

Environmental Stress Cracking Resistance Tester is a unique test cabinet designed to detect the change in the physical characteristics of the plastic material and to ascertain the actual working life of test samples at environmental stress.

MODELPEC - 1001

Environmental Stress Cracking Resistance Tester is a unique test cabinet designed to detect the change in the physical characteristics of the plastic material and to ascertain the actual working life of test samples atenvironmental stress. It is important resin property caused by tensile stresses.

The PrestoEnvironmental Stress Cracking Resistance testeris accompanied by standard accessories such as cutting die, glass tubes, digital temperature controller and foils. The aesthetic appeal is enhanced by the autumn gray and blue combination finishing and bright chrome/zinc plating to ensure resistance to corrosion.

Presto offers an Environmental Stress Cracking Resistance Tester specially designed for evaluating the effect of environment on blow molded polyethylene containers. In the presence of certain substances like, soaps, oils, detergents or wetting agents plastic containers may exhibit mechanical failure by cracking. A similar effect is witnessed under conditions of stress and cracking occurs at appreciably lower stress than in the absence of such environments or conditions.

The Presto Environmental Stress Cracking Resistance Tester is widely used for measuring the environmental stress cracking resistance of plastic containers, which is essentially the summation of various parameters. It is influenced by the container design, resin blow molding condition, treatments during and after production and other factors that affect this property. This test procedurehelps plastic manufacturersto isolate and identify the effect of the related factors onstress crack resistanceof the container.

The Prestoenvironmental stress cracking resistance testerhas been made in accordance with industry standards that include ASTM D1693-15 which provides highly accurate testing results. This labtesting equipmentconsists of a temperature range (for silicone oil) from ambient to 250 degree Celsius whereas the temperature range (for water) will be available from ambient to 90 degrees Celsius.

This mild steel duly powder-coatedlab testing instrumenthas been equipped with rapid heaters for uniform and homogenous heating and maintaining the temperature inside the chamber. It comes with an integral water drain system & integral water drain system along with inbuilt calibration features with reference to the master PID controller.

Users can easily conduct environmental stress-cracking resistance tests with the help of this testing machine. It comes with the provision of a set value (SV) and process value (PV) on the temperature display. With the help of thislab testing equipment, one can easily test their products effectively in different environmental conditions and test the change in the physical characteristics of the products. To know aboutenvironmental stress cracking resistance tester pricesor other related information, consult with our technical experts now.

The MB95?s halogen heating system distributes heat uniformly over the sample and speeds up the drying process ? delivering fast and precise measurements.

MODELM 95

The MB95s halogen heating system distributes heat uniformly over the sample and speeds up the drying process delivering fast and precise measurements. Designed for tool-free cleaning, the MB95s components can be easily removed for quick and easy maintenance. Operating the MB95 is intuitive with the icon-driven menu navigation on the touchscreen display.

Drop tester is the perfect machine to test the drop strength of the corrugated cartons. It is equipped with a wired remote-control mechanism to eliminate the human interference. The test specimen is observed visually after it is made to fall from a certain height. The instrument work with pneumatic application and used in almost every industry that deals with corrugated cartons.

MODELPDT - 0135

Drop tester is perfect machine to test the endurance of the corrugated cartons. It is equipped with a motorised arrangement to lift the single wing structure. The pneumatic system operates the wing structure. It has a wired remote control to operate the machine. The boxes are tested on 3 ways, edge wise, corner wise and flat surface. The box placed on the wings is carried to a specified height as per the testing standards to drop it. Once the box is dropped, the operator visualises the effect of free fall on the carton. It is widely used in the different industries that deals with carton manufacturing.

Prestodrop testeris widely used in the paper and packaging industry to test the drop strength of boxes against drops. Thispackaging drop test machinecomes with the provision to lift up the test platform with the guided motorized mechanism. Besides this, it has been built on a strong base plate with a rugged structure to accurately conduct drop strength tests on the packages. With the use of this high-qualitylab testing instrument, carton manufacturers can determine the maximum load that a box or carton can endure before it fails. Presto is a leadingdrop strength tester manufacturerand offers the bestdrop tester pricefor its clients.

This motorizeddrop test machinecan accurately conductcarton drop testson the packages and comes with a maximum drop height of 380mm. Users can accurately operate this high-quality testing instrument by plugging this machine on the power of 220V AC, 5 Amp, Single phase, 50Hz. When the carton will be dropped from a certain height then the manufacturers can easily assess its durability and quality. The corrugated box or carton with poor quality material can easily get damaged when falling from a certain minimum height.

Thepackage drop testconducted with the help of adrop testerwill help the paper and packaging product manufacturers to improve the quality of their materials. Besides this, by conducting this quality test on the boxes, one can easily ensure that their products will accurately be delivered to the customers.

Magnamike, manufactured by Olympus, is a premium-quality device renowned for its excellence in conducting wall thickness gauge testing. Offering a non-destructive testing method, this instrument is ideal for measuring the wall thickness of PET bottles. Presto Stantest serves as an authorized dealer for this device.

MODELMagna-Mike 8600

Magnamike is a high-quality product by Olympus. It is the best device to perform wall thickness gauge testing. The instrument provided a non-destructive method of testing the wall thickness of the PET bottles. Presto Stantest is an authorized dealer of the device. The device is used to measure the thickness of non-ferrous material that ranges from PET, plastics, preforms, plastic bottles, water tanks glass bottles, aluminum, etc. The wall thickness gauge offers reliable and accurate test results.

The best testing device which is used to perform bottle thickness measurement is Magnamike 8600 wall thickness gauge. The instrument is widely used to test the quality of non-ferrous material like Preforms, glass, water tanks, aluminum, foam, PET, etc. The testing instrument works on the principle of Hall Effect technology. It works on a very simple magnetic procedure that makes a simple and repeatable measurement of non-ferrous materials. The device is provided with the digitally colored display that clearly shows the result of thickness measurement on the screen.

Presto offers the best quality of wall thickness gauge testing instrument i.e. Magnamike 8600. The instrument works on the basis of Hall Effect Technology. To perform the test efficiently, it is necessary to access both sides of the container. The ball is placed inside the bottle, and the magnetic probe is placed outside. The sensor inside the probe measures the distance between the ball and the probe tip which helps to measure the thickness of the bottles accurately and efficiently. The wall thickness gauge is used to measure the thickness of plastic bottles, glass containers, aluminum beverage cans, foam, paper glass, HDPE containers.

• Thickness of Plastic Bottles & Packaging for Pharmaceutical and Medical
• Measuring Thickness of Glass Containers & Scientific Glass.
• Measuring Thickness of Aluminium Beverage cans.
• Measuring Thickness of Paper Glass
• Measuring Thickness of Foam
• Measuring Thickness of HDPE containers

Purchase a Magna Mikethickness tester from Presto, the leading supplier of Bottle Wall thickness measurement system. Buy now at the best price from a trusted supplier.

Presto Adhesion Strength Tester is used to quantify the permanence of adhesion or peel ability of self- adhesive pressure sensitive materials. Peel adhesion is defined as the force required for removing a pressure sensitive coated material.
Peel Bond Strength Digital Testeris a standardized test machine, which is widely used to conduct accurate peel/seal strength test for adhesive materials. Suitable for measuring the stability of adhesives like tape or glue, it is a reliable quality control equipment. It is used for checking the ability of the sample to get peeled off from a surface. The testing equipment is designed and manufactured according to ASTM D903 standard.
PrestoPeel Strength Testerhas a display screen which is based on a hi-tech microprocessor that converts force applied into numeric values. So, the peel adhesive strength value that is measured can be directly viewed on the screen. Application force is controlled uniformly; this is done in order to ensure equal distribution of pressure, all over the test sample.Registered Design No. 361206-003

MODELPPSS-2000

Flammability Tester (UL94) is a smart testing apparatus which is utilized to conduct the Standard test for ensuring the Safety of Flammability of Plastic Materials which are used for Parts in Devices and Appliances.

MODELPFT - UL-94

Flammability Tester(UL94) is a smart testing apparatus which is utilized to conduct the Standard test for ensuring the Safety of Flammability of Plastic Materials which are used for Parts in Devices and Appliances.

This is to note that the test doesnt show the real hazards faced by the specimen in real-life fire accidents. It just helps in categorizing samples as per their flammability quality. Plastic components which are used in electrical appliance or computer device must exhibit some amount of resistance towards the fire. These material are prone to catch fire easily and damage the entire circuit. Customers demand that the plastic component to be selected for a particular appliance must pass the UL 94 standard. Therefore, choosing the best and reliable testing apparatus is very important.

When it comes to plastics, flammability is an important safety consideration. Some plastics are highly flammable, while others are much more resistant to burning. To make it easy for plastic product manufacturers to conduct flammability test on the materials, we at Presto has designed a high-qualityflammability tester. This lab testing instrument has been equipped with a 7 Segment Display with an auto flame stop mechanism installed in it.

This easy-to-operate lab testing instrument will make it effortless for plastic product manufacturers to test the flammability of plastic parts. It has been incorporated with automated timer initiation through limit switches. Users will get the bestflammability tester pricewhen they purchase thistesting equipmentfrom Presto. This laboratory testing equipment will play an efficient role in determining quality control, production, and development of the product.

By conductingflammability testson plastics, manufacturers can identify potential fire hazards & make necessary changes to improve safety. Thislab testing instrumentis a boon in the plastic product manufacturing industry.

Flammability testing determines how easily a material or finished product will ignite or burn when exposed to or used near fire or heat. Flammability testing covers several different testing protocols and methods intended to measure a material's vulnerability, including its susceptibility to an ignition source, its propensity to combust, and the rate at which it will burn when ignited. The Tester is based on IS 15061, The standard is applicable to check the burning behavior (ignitability, burning rate and melting behaviour) of interior materials used in motor vehicles.

MODELPFT-IS 15061.

Presto offers different types of environmental testing instruments to create actual weather conditions of various kinds. One of the best environmental test equipment introduced by Presto is Xenon 866. The test equipment helps to examine the weather resistance.

MODELPSPL - 866

Presto offers different types of environmental testing instruments to create actual weather conditions of various kinds. One of the best environmental test equipment introduced by Presto is Xenon 866. The test equipment helps to examine the weather resistance of polymers when placed under different climatic conditions that are created in the laboratories. It is the highly cost-effective method which is used to measure the quality of the polymers.

The accelerated weathering testers are usually equipped with two types of lights namely, Fluorescent lamps and Xenon lamps. Out of these two lamps, xenon is widely used as they are highly feasible. The xenon lamps are used to measure the actual life of the polymers. These kinds of lamps are filled with xenon and discharge high volume of xenon hence produces sufficient amount of sunshine to measure the effect of heat on the polymers. These lamps offer stable spectrum distribution and offer steady light energy.

Presto introduces Xenon Test Chamber PSPL 866 Model that provides the best source of light and helps to modify the spectrum of sunlight. The testing machine is equipped with a control panel that controls the humidity and temperatures. The instrument is widely used to create various types of temperatures inside the chamber like sunlight, moisture, and many more that create various effects on the polymers like reduction, fading, flaking, chalking, oxidation and many more.

Presto's Profile Projector is robust measuring testing equipment which is widely used in PET & Preform Industries, quality assurance departments, machine shops and also in industrial testing laboratories.

MODELPPPD-0116 (DRO)

Prestos Profile Projector is robust measuring testing equipment which is widely used in PET & Preform Industries, quality assurance departments, machine shops and also in industrial testing laboratories. They are suitable for quality control and measuring a broad range of weights and size of the PET Bottles and Preforms. It is a cost effective solution which is used for digital linear and for angular measurement. The instrument is also equipped with a built-in DRO.

The basic use of Profile Projector in PET & Preform Industry is to identify an edge or point of the shadow of the PET Bottles in order to measure the length of the PET or Preform from this particular point. By expanding the image via profile projector, the operator can easily decide that from where the edge or the point of the shadow starts. Profile images are also used to take important decisions to fulfill various measurement purposes like it matches the size of the bottles with standard size to evaluate whether a part of the bottle is designed correctly or not.

Illuminated Inspection Magnifier is a consistent tool that helps the manufacturer in testing the small components or parts using a magnified glass. It uses a convex lens tho obtain magnified image of the object.

Illuminated Inspection Magnifier is a consistent tool that helps the manufacturer in testing the small components or parts using a magnified glass. It uses a convex lens tho obtain magnified image of the object. With Illuminated Inspection Magnifier, magnified image of the object is seen along with light source from its top for clear visuality of test objects.

The PRESTO ILLUMINATED INSPECTION MAGNIFIER is highly useful for inspection of small parts and also for online visual quality evaluation. The magnifier is equipped with a special imported lens and illuminator. It is widely used in the plastic industry.

The PRESTO ILLUMINATED INSPECTION MAGNIFIER provides illumination from the top. The height and angle of illumination is adjustable.

Presto Cyclic Corrosion Salt Spray Chamber Worlds most Interactive and versatile corrosion test systems range available, synthesizing salt spray with other environmental conditions such as controlled humidity, ambient drying, air drying, dwell cycle and wetting / condensation.

MODELCCT-250

Presto Cyclic Corrosion Salt Spray Chamber Worlds most Interactive and versatile corrosion test systems range available, synthesizing salt spray with other environmental conditions such as controlled humidity, ambient drying, air drying, dwell cycle and wetting /condensation.

Presto Cyclic Corrosion Salt Spray Chamber models will perform the neutral salt spraytests, along with in addition these CCT models are loaded with extra features which enables users to perform intense modified tests such as those explained in ASTM G85. In this the conventional salt spray is often programmed with multiple climate, in a multi-stage cycle, to intensify the test. Some Test Cycles Names- Salt spray and Wetting / Condensation Humidity (SWAAT) or Salt spray and Air drying (PROHESION).

Water Bath Digital is a proficient testing chamber which is utilized to inspect the modifications or damages occurring in the material's physical characteristics and to evaluate the actual working life of tested specimen at increasing temperature.

MODELPWBD 0136

Laboratory fume hoods are designed to protect laboratory personnel by preventing contaminants such as chemical vapors, dust, mists and fumes from escaping into the laboratory environment.

MODELPFH-0125

Laboratory fume hoods are designed to protect laboratory personnel by preventing contaminants such as chemical vapors, dust, mists and fumes from escaping into the laboratory environment. Laboratory fume hoods also provide lab personnel with a physical barrier to chemicals and their reactions. Fume hoods are evaluated each year to verify their proper operation. They are generally set back against the walls to cover up the exhaust ductwork. Because of their shape, they are generally dim inside but have a provision for a light source. The front opening is made up of glass, able to move up and down on a counterbalance mechanism.

The Presto Fume Hood has heavy Stainless Steel Construction 304 Grade, a small S.S. Sink, Water Tap, Water outlet provided. A sliding glass door moves vertically with counter weight. Complete with fluorescent light. Centrifugal motor fan with S.S. fitted with the exhaust fumes will vented with PVC pipe outlet.

This test method covers the effects of elevated temperatures on the properties of a material. Testing is performed in air for a specified period at a specified temperature. Properties are measured prior to and after high temperature exposure.

MODELPAAD -35

This test method covers the effects of elevated temperatures on the properties of a material. Testing is performed in air for a specified period at a specified temperature. Properties are measured prior to and after high temperature exposure. Values represent a percentage change in properties with the exception of the Change in Durometer Hardness and Change in IRHD Hardness. Change in hardness values are reported as the change in hardness points.

Standard: ISO188-2011

Different defects like cracks and strains present in PET & preform products may affect their quality. Testing these defects will help the manufacturers to gain confidence in their product quality. Presto has designed a high-quality lab testing instrument known as Polariscope Strain Viewer-NXG.

MODELPPH - 204

Presto provides the Polariscope, an exceptionally effective strain viewer designed to assist manufacturers in testing the quality and transparency of their products, thereby ensuring the highest standards of quality assurance for customers. The Polariscope operates on the principle that variations in refractive index indicate differing strain distributions, resulting in reduced material transparency.
Registered Design Patent No. 252609

MODELPPS - 400

Polariscope, a highly efficient strain viewer that helps the manufacturers in testing the quality and transparency of the products so that best quality assurance could be ensured to the customers. The working of thePolariscopeis based on the principle that any change in refractive index is due to different strain distribution and this leads to lower transparency of the material. The testing instrument offered by Polariscope comes in variety of sizes and specifications according to the requirements of the clients

Photoelasticity is a significant phenomenon observed in PET, preforms, and glass products. It refers to the alteration in the material's refractive index due to non-uniform strain distribution. Photoelasticity poses a considerable challenge for manufacturers of PET and glass items as it represents a notable flaw in productquality.

Offers two models of Polariscope that are Polariscope Dx and Polariscope computerized. The instruments are manufactured with best quality of materials to provide an extended service life and accurate testing procedures. The testing instrument is provided protection from corrosion and rust with Zinc and chrome plating and has been given a smooth and attractive finish in grey and blue color. The instrument is also provided with an instruction manuals and a conformance certificate that can be traced to any of the NABL approved laboratories.

Purchase a Polariscope from Presto, the premier manufacturer of stress testing instruments. Get precision results at the best price from a certified supplier today.

Polariscope Strain Viewer computerised is utilized for conducting quality and transparency test. It is used to identify and evaluate residual strain in PET preforms, bottles and similar products.

MODELPPC-203

Polariscope Strain Viewer computerised is utilized for conducting Quality and Transparency test. It is used to identify and evaluate residual strain in PET preforms, bottles and similar products.

It works on the standard principle of using polarized light to identify strain in preforms. The Polariscope incorporates a polarizing filter to convert white light into a straight lined polarized beam which is directed through the sample. Actual level of stress in the specimen can easily be determined by comparing colours exhibited during the test with those produced by calibrated defect chart.

Presto's Glass & Plastic Polariscope - Strain Viewer is the best and highly effective testing device which is used to measure the residual stresses and strains that are introduced during the manufacturing process of the products that severely affects the strength of the product.

MODELPSPL - G20

Presto'sGlass & Plastic Polariscope - Strain Vieweris the best and highly effective testing device which is used to measure the residual stresses and strains that are introduced during the manufacturing process of the products that severely affects the strength of the product. These effects can be harmful as it may contribute to the products failure in service or it can be beneficial, as for example in the inducement of compressive stresses in the surface layers of toughened glass to increase its strength in service.

One of the most powerful methods, where the product is made of transparent glass or plastics, is based upon the photoelastic technique which involves the passing of polarized light through the product and interpreting, qualitatively or quantitatively, the resulting optical interference pattern. In the case of glass products, it is usually the residual stresses which are measured whilst in the case of plastics molding, casting or extrusions it is the strains which generally are of importance. Thetesting instrument is manufacturedby considering relevant parameters and various standards that are introduced by standardized and reputed authorities.

ThePresto Polariscope strain viewer for glass and plasticsis made to easily detect the defects present in preforms and glass products. This is one of the most accurate qualitylab testing instrumentsthat make the use of a monochromatic light source for visual inspection of the testing specimen. Users can easily rely on thislab testing equipmentto test the deforms present in plastic and glass products.

The sample will accurately be placed in the testing area and can be tested to evaluate different types of defects in the specimen. Users will get a sharper and clearer optical viewing experience with the use of this qualitylab testing equipment. Presto offers the bestPolariscope strain viewer priceto our clients. With the help of this qualitylab testing equipment, one can detect stress, strains, or even cracks present in plastic and glass products. The wide viewing area present in this testing equipment will give a sharper and clearer optical experience to the users. The samples can easily be tested at 45 and 90 degrees of angles. Presto is a leadingPolariscope strain viewer manufacturerand offers this testing equipment embedded with high-quality and advanced testing features.

Preform Defect Chart is a consistent tool useful for visual assessment and evaluation of defects found in PET preforms. Used in various industries and laboratories to maintain quality and consistency of a sample to detect the defects under natural and polarized lights.

Presto's Hot Wire Bottle Cutter is a widely used instrument in PET bottle industries. PET bottles are mainly used for packaging of various products such as carbonated drinks, food items and so forth. They are also used for packaging of chemical.
Registered Design Patent No. 252608

MODELPHWBC-NXG

PrestosHot Wire Bottle Cutteris a widely used instrument in PET bottle industries. PET bottles are mainly used for packaging of various products such as carbonated drinks, food items and so forth. They are also used for packaging of chemical. The shape and size of the bottles is important for the better safety of the products that are packaged in the bottles. For the best shape and size, it is important to test the weight of every section of the PET bottles individually. This process is called the section weight analysis. For accurate section weight analysis, the individual sections of the PET bottles need to be cut properly and precisely without causing any deformation in the shape of the bottle. The Hot wire Bottle cutter helps in this testing procedure of the PET bottles.

The PrestosHot Wire Bottle cutter NXGis designed to easily cut the individual sections of the PET bottles. The capacity of the bottles that can be cut using the instrument ranges from 200 ml to 2000 ml. the maximum diameter of the bottles that can be cut with the hot wire bottle cutter is 110 mm. Each section of the bottles is cut in exact dimensions and not deformation occurs in the shape and size of the bottles during the cutting. After accurate cutting of the sections, each section is weighed on a digital balance for accurate measurement of the weight of the sections. This helps in controlling the manufacturing process for better quality assurance and quality control.

A Digital Bottle Burst Tester is used in PET bottle industries to test the strength of the bottles against bursting. For PET industries, it is important to provide best quality bottles to the bottling plants so that the best safety of the products could be ensured with proper quality testing.
Registered Design Patent No. 279110

MODELPBBT - 0100

ADigital Bottle Burst Testeris used in PET bottle industries to test the strength of the bottles against bursting. For PET industries, it is important to provide best quality bottles to the bottling plants so that the best safety of the products could be ensured with proper quality testing. Bursting is a Major problem that thePET industriesface when the bottles are filled with high pressure carbonated beverages and drinks. This can be solved with the help of bursting strength tester.

It is the responsibility of themanufacturers of the PET bottlesthat they test the quality of the bottles so that they do not burst on application of small pressure on them. The bottles burst tester is a major testing instrument that is used in the PET industries to test the bursting strength of the bottles.The DigitalBottle Burst Testeris capable of providing the best analysis of the strength of the bottles and the amount of pressure that they can bear during filling of products.

A major role is played by the thickness of the walls of the PET bottles in defining the burst strength of the bottles. The test helps in determining whether the bottle walls are thick enough to resist the burst or not. This test also helps in calculating various other factors such as bottle expansion volume. TheDigital Bottle burst testeroffered by Presto is equipped with a digital timer which can be preset. The maximum time limit that can be set in the timer is 999 seconds. There is also a auto cutoff facility provided with the machines.

The Digital Bottle burst tester is a highly precise and accurate testing instrument offered by Presto. Fully automatic pneumatics is used for exerting the air pressure on the bottles. There is also a auto pressure hold facility provided with the machine which helps in holding the pressure for a specific time.

Prestodigital bottle burst testerwill help to accurately test the pressure at which the bottle will get burst. It comes with LED digital display that let the users view pressure accurately. Thisbottle testing equipmentwill provide highly accurate test results under pneumatic pressure control. Its strong clamping mechanism will help to perform tests accurately. Thus, these features make it the top choice for bottle-testing companies.

Presto is a leadingdigital bottle burst tester manufacturerand provides the best bottle burst tester price to clients. Users can easily tighten the specimen accurately using clamping and lever arm. It comes with a digital preset timer that can be changeable to Hrs: min: sec. Thisbottle testing instrumenthas been made in accordance with industry standards that include ASTM C147-86(2015). This will help the users to get highly accurate test results whenever they make use of this high-qualitylab testing equipment.

Bottles with maximum diameter of 150mm can easily be tested against bursting in this lab testing instrument. It has been built with LED digital pressure display and the bottles can be tested for the range of up to 260 psi. If you are working in the PET bottle manufacturing industry, then thislab testing equipmentwill be a boon in your industry.

Bottle Burst Tester is a consistent tool used to perform Bottle burst test on PET bottles with minimum pressure and check the volume expansion of test samples. The testing instrument Bottle Burst Tester - Touch screen is used to measure the Burst Strength of PET bottles when subject to pressurized air.
Registered Design Patent No. 252612

MODELPBBT-0101

Bottle Burst Tester is a consistent tool used to perform Bottle burst test on PET bottles with minimum pressure and check the volume expansion of test samples. The testing instrument Bottle Burst Tester - Digital is used to measure the Burst Strength of PET bottles when subject to pressurized air. It measures the volumetric expansion of PET bottle under pressure conditions to rupture or burst the bottle.

PET bottles are extensively utilized in various industries for bottling a diverse range of products, including carbonated drinks. However, a common issue encountered during the bottling of carbonated drinks is the potential for PET bottles to burst under high pressure or if they possess insufficient strength.For this the manufacturers of the PET bottles need to test the burst strength of the bottles using proper testing methods and testing instruments. Touchscreen Model of Bottle burst Tester is one of the best suited testing instruments that can be used for testing the strength of the bottles.

The bottle burst test is commenced by exerting a high amount of pressure in the bottles using highly pressurized air. The pressurized air replicated the pressure exerted on the bottles when a carbonated drink is filled inside them. The testing procedure helps in testing various aspects of a bottle such as expansion volume, burst strength and thickness of the walls of the PET bottles. Prestos Bottle burst tester Touchscreen Model model is a highly sophisticated and accurate testing instrument that is used for testing the strength of the bottles widely in PET industries and bottling units.

Standard: ASTM C147-86(2015).

Torque Tester - Digital is a consistent tool to measure the force or torque required to open a closed cap of PET bottle. It gives Torque in digital format. The digital display is a high-end sophisticated read out with Auto Tare (ZERO) set facility and Peak Hold arrangement.Registered Design Patent No. 361206-001

MODELPTT-0102

HMI Touch screen is a new generation fully automatic torque tester. It gives Torque in a Digital format. The HMI display is a high end Sophisticated read out with auto tare Zero set facility and peak hold arrangement. The test sample is placed in between the anti-slip holders /pegs for strong holding of test sample

MODELPTT-0102 (C) (Prima Series)

Torque Tester - Analogue is a consistent tool to measure the force or torque required to open a closed cap of PET bottle/Jars. It gives Torque in analog format. The analogue display is a high-end sophisticated read out with pointer adjusting knob.

MODELPTT-0103

Measuring the seal integrity of glass bottles is an important step in ensuring a safe and secure packaging solution. It ensures that the contents within the bottle remain safe from contamination or accidental leakage. Seal integrity testing can also help to identify any structural issues with the bottle, such as weakened seals, which might lead to breakage in transit. Additionally, seal integrity tests can help to monitor the quality of products and make sure that each bottle is produced to the same high standard.

MODELPSST-0115 NXG

Secure Seal Tester is a consistent tool useful to measure the seal integrity on Pet & Plastic containers. The secure seal test is one of the most important quality tests carried out at carbonated bottle testing facilities to assure the leak integrity of bottle caps. Thus, we at have designed a high-quality lab testing instrument known as Secure Seal Tester.

MODELPSST - 0113

This instrument has been designed to address the special needs of sealed carbonated beverage containers that use plastic caps & closure. Testing the seal integrity of carbonated containers is an important part of quality control and ensures that the bottles will not get leaked. The secure seal test is one of the most important quality tests carried out at carbonated bottle testing facilities to assure the leak integrity of bottle caps. Thus, we at have designed a high-quality lab testing instrument known as Secure Seal Tester.

This is one of the high-quality testing instruments that come with microprocessor-based controls and is operated at the working pressure of 175 psi compressed air. It has automatic sample testing through an easy pressure release mechanism. With its inbuilt calibration facility, and digital pressure display for easy pressure monitoring.

It comes with mild steel powder coated with High tensile Plexiglas (with an extra safety shield) and it has pressure, inlet pressure setting, and preset timer functions incorporated for accuracy and repeatability. By detecting gas leakage rather than liquid, thesecure seal testergives more sensitive and accurate readings. The test sample is closed tightly to check for any leakage of gas.

The Next Generation Model of the Secure Seal Tester is a reliable tool designed for measuring the seal integrity of glass and plastic containers. Specifically tailored to meet the unique requirements of sealed carbonated beverage containers utilizing aluminum roll-on, twist crowns, or plastic caps, this instrument provides consistent and effective seal testing capabilities.

MODELPSST-0114 NXG

Secure Seal Tester - Next Generation Model is a consistent tool useful to measure the seal integrity ofglass/plastic containers. This instrument has been designed to address the special needs of sealed carbonated beverage containers that use aluminum roll-on, twist crowns or plastic caps.

PET bottles are extensively used for packaging of liquids such as soft drinks, juices, carbonated drinks and so forth. Additionally, they are also used for packaging and storage of chemicals. For this reason, it is important to test the integrity of each and every part of the bottle so that there are no chances of damage or spillage of the products that are packaged in the bottles. A major factor that needs to be tested is the intactness of the bottle caps. TheSecure seal testertouch screen model is an ideal testing instrument that allows easy operation and analysis of the test results.

The Prestossecure seal testertouch screen model is a widely used testing instrument that is used for testing the capacity or strength of the caps or twist crowns. The touch screen model of secure seal tester is very easy to use and there are digital touch screen interface provided with the instruments which allows stable and simple operation of the equipment.

In the PET bottle industry, it is important to test the seal integrity of PET bottles to ensure quality products will be delivered to the customers.Presto secure seal tester NXG modelis an HMI-based touchscreen model that comes with microprocessor controls to test the seal integrity of materials. It has been embedded with highly advanced features like automatic sample testing through an easy pressure release mechanism.

This high-qualitylabtesting instrumentwill let the users operate the data with ease. The users can create reports of product identification, test pressure, time, etc. USB option will also be available in this testing equipment for storing the data efficiently.Ensuring the secure seal of PET bottles is essential to verify proper sealing and prevent potential leaks. A leaked bottle can lead to spills, posing dangers or hazards. However, employing a bottle secure seal tester facilitates straightforward testing of seal integrity, ensuring the reliability of these containers.Presto is a leadingsecure seal testing manufacturerand provides the bestsecure seal tester priceto clients. It comes with an in-built calibration facility that will help to test the seal integrity of bottles with ease.

Besides this, it comes with advanced features like changeable pressure units, current test running status display, automatic sample testing, and many more that make it easy for bottle manufacturers to test their products efficiently.

Buy a Secure Seal Tester from Presto, the trusted manufacturer and leading supplier. Get the best price on reliable sealing testers and ensure packaging integrity with our advanced equipment.

The Top Load Tester gives the compressive buckling load in digital format. This is a fully automatic motorized model. The Digital display of the Digital Top Load Tester is aesthetically appealing and sophisticated. It has the capability of measuring the maximum load a container can withstand without deforming when the force is applied from the top.
ATop Load Testerplays a major role in testing strength of items like bottles, containers, jars or packaging materials. It will help you avoid transit issue. You will be able to restrain deformation and defects while storage, shipping and transportation. A Top load tester is widely accepted in various industries like bottling manufacturing, filling and beverage etc. It is a proven method to avoid rejections and leave a perfect impression on your customers.
Registered Design Patent No. 279112

MODELPTL-0105

The Top Load Tester is a fully automatic motorized model that provides the compressive buckling load in digital format. Its digital display is not only aesthetically appealing but also sophisticated, offering easy readability. It comes with features like Auto Tare (ZERO) set facility and Peak Hold arrangement.

This advanced generation of theTop Load Testeris fully automatic and motorized, capable of providing digital readings for compressive buckling load. The load sensor can be calibrated in-house for accurate measurements. To ensure secure gripping without slipping, the bottle is placed between the inverted concave jaws. The operator can easily switch off the machine upon observing buckling in the PET bottle.

Designed specifically for determining the load-bearing capacity of PET containers under extreme top loads, the Top Load Tester accurately measures the maximum load a PET container can withstand without deformation or failure.

Top load tester is a reliable equipment which is used to evaluate the load-bearing capacity of containers. It is particularly useful for assessment of plastic containers, PET bottles and cans. It works on the principle of measuring the amount of force required to crush a container or cause it to deform. This parameter is crucial for evaluating the structural integrity and durability of plastic/packaging materials.

Widely used in the packaging industry, the Top Load Tester is specifically designed to ensure that containers can withstand the forces they encounter during shipping, handling, and storage. This test helps manufacturers in preventing product damage and preserving product quality.

Further, it is used to measure the buckling strength of PET bottles or plastic containers. Simulating real-life compressive load, TOP LOAD TESTERis useful in assessment of a PET bottle, since it gives an accurate measure of the stress experienced by it during storage or in transportation. Evaluating the capacity of a bottle/plastic specimen against vertical compressive load, using Top Load Tester further helps in quality control and quality assurance.

The new generation Top Load Tester - Prima Series for PET bottles and jars is a fully automatic motorized device that helps to generate compressive buckling load on the products. The instrument offers compressive buckling load on Human Machine Interface based Touchscreen display.

MODELPTL 105 (Prima)

The new generationTop Load Tester - Prima Seriesfor PET bottles and jars is a fully automatic motorized device that helps to generate compressive buckling load on the products. The instrument offers compressive buckling load on Human Machine Interface based Touchscreen display. The display if high end sophisticated with Auto Tare (Zero) set facility and Peak Hold arrangement. The test sample is placed between the inverted jaws for zero slippage grips. TheTop Load Tester - Prima Seriesis designed to provide compressive buckling load. The instrument is used for testing the load bearing capacity of the PET containers when subjected to an extreme load from the top direction. It helps to determine the maximum load a PET container can bear without any deformation or failure.

The new generation fully automatic Computeriesed Top Load Tester for jars is a "Twin Screw model" that helps to generate compressive buckling load on the Jars. The load sensor can be calibrated in-house. The bottle needs to be placed in between the inverted compression platens.

MODELPTL - 0107

The new generation fully automatic Computeriesed Top Load Tester for jars is a Twin Screw model that helps to generate compressive buckling load on the Jars. The load sensor can be calibrated in-house. The bottle needs to be placed in between the inverted compression platens.

Top - load testing (also known as 'column-crush' and 'axial force resistance') is performed mainly on blow moulded, the reformed or injection moulded plastic containers. It measures the compressive strength of such containers to ensure they do not deform or break when subjected to axial forces during the processes of filling, closure, storage and transport.
Registered Design Patent No. 341519-004

Top - load testing (also known as 'column-crush' and 'axial force resistance') is performed mainly on blow moulded, the reformed or injection moulded plastic containers. It measures the compressive strength of such containers to ensure they do not deform or break when subjected to axial forces during the processes of filling, closure, storage and transport.

Preform Perpendicularity Tester is a consistent tool that helps the manufacturer in testing the perpendicularity of PET preforms. It is based on the principle to test the accuracy of the shape and size of preforms.

MODELPPT - 0108

Preform Perpendicularity Tester is a consistent tool that helps the manufacturer in testing the perpendicularity of PET preforms. It is based on the principle to test the accuracy of the shape and size of preforms. With Preform Perpendicularity Tester, PET Preform Perpendicularity is checked as it is dependent upon the shape, size, and quality of the product. It had a basic turntable where the preform is placed and rotated with a probe checking the differential in movement.

The shape and size of a Preform hold a greater responsibility for the quality of the final product that is made from it. The manufacturers in the Preform industry need to test the accuracy of the shape and size of the Preform that are used in manufacturing of various PET products such as bottles, containers etc.

The perpendicularity of the Preform is a major aspect that can affect the quality of the final products. If the perpendicularity of the Preforms is not accurate, it can lead to a deformed shape and size of the containers and bottles. Prestos Preform perpendicularity tester is a high efficient testing instrument that I widely used in PET and Preform industry to test the perpendicularity of the Preforms. The equipment has a digital display which allows the users to easily read the testing results clearly.

Preform Eccentricity Tester is a consistent tool that helps the manufacturer in testing the eccentricity of PET preforms. It is based on the principle that anyhow a preform deviates from being circular.

MODELPET - 0110

Preform Eccentricity Tester is a consistent tool that helps the manufacturer in testing the eccentricity of PET preforms. It is based on the principle that anyhow a preform deviates from being circular. With Preform Eccentricity Tester, PET Preform Eccentricity is checked as the shape, size and quality of the product are more dependent on its eccentricity.

Comes with height adjusting knob to adjust the height of gauge and Preform holder. Highly accurate and reliable instrument to measure the eccentricity of Preforms.

PET and Preform products are normally used in industries for packaging purposes. They are basically used for packaging of critical items such as food items, beverages, chemical etc. The Preform are the base to produce high quality PET products and if there is some problem or defect in the Preform it can significantly affect the quality of the PET products produced from them. It is essential to test their quality properly to make sure that best quality products are produced. The eccentricity is a major attribute Preform used in PET industries for quality reasons. The Prestos Preform Eccentricity tester is an efficient testing instrument for testing the eccentricity of the PET performs.

The eccentricity is a major aspect of PET performs and contributes a lot to the quality of the PET products. If the eccentricity of the Preform is not perfect, the shape and size of the PET products can be hampered to a great extent. The Preform Eccentricity tester offered by presto is widely used to test whether the eccentricity of a test sample is perfect or not. The instrument complies with all the essential standards and comes complete with a user manual and a conformance certificate.

Bottle Perpendicularity Tester is a consistent tool that helps the manufacturer in testing the perpendicularity of PET Bottles or Blow molded containers. It is based on the principle to test the accuracy of the shape and size of the bottle.

MODELPPTB- 0109

Bottle Perpendicularity Tester is a consistent tool that helps the manufacturer in testing the perpendicularity of PET Bottles or Blow molded containers. It is based on the principle to test the accuracy of the shape and size of the bottle.

WithBottle Perpendicularity Tester, PET Bottle/Container Perpendicularity is checked as it is dependent upon the shape, size, and quality of the product. It had a basic turntable where the test specimen is placed and rotated with a probe checking the differential in movement.

Base Clearance Membrane and Vault Control Unit is a consistent tool that helps the manufacturer in measuring the depth of the base of PET preforms and bottles. It is based on the principle to test the accuracy of the shape and size of preforms and determine stability.
Registered Design Patent No. 279107

MODELPBCM-0121

Base Clearance Membrane and Vault Control Unit is a consistent tool that helps the manufacturer in measuring the depth of the base of PET preforms and bottles. It is based on the principle to test the accuracy of the shape and size of preforms and determine stability. With Base Clearance Membrane and Vault Control Unit, PET Preform and bottles base depth is checked as it is dependent upon the shape, size and quality of the product. It has a basic flat base where the bottle is placed and with a probe checking the depth of base bottle vault easily.

Carbonation Assembly is an efficient instrument designed to evaluate the pressure and temperature of carbonated drinks. It is considered to be one of the most precise and trustworthy inspection assembly in PET Bottle industry.

MODELPCM - 0120

Carbonation Assembly is an efficient instrument designed to evaluate the pressure and temperature of carbonated drinks. It is considered to be one of the most precise and trustworthy inspection assembly in PET Bottle industry. A highly accurate spherical indenter is installed in the machine which is responsible for indenting the specimen under punch assemble utilizing pressing tools. The test readings can be seen afterwards on the respective gauges. The main body is being coated with corrosion resistant finish for long life functioning. Precisely designed dial gauges are equipped for zero error testing data along with a digitalized thermometer for temperature recording. The apparatus is not at all heavy like other equipment and allow complete portability for operators.

There are two more models available in this range with distinct span height and diameter value. These are:

1. Carbonation Assembly - 120 (A) - Model no. PCM - 0120 (A)

2. Carbonation Assembly - 120 (B) - Model no. PCM - 0120 (B)

Presto's Bottle shaker or G V Shaker is a mechanical and motorized testing instrument used to automate the shaking of bottle specimens to stimulate the carbon dioxide, present in the test specimen.

MODELPBS - 0119

Presto's Bottle shaker or G V Shaker is a mechanical and motorized testing instrument used to automate the shaking of bottle specimens to stimulate the carbon dioxide, present in the test specimen. To perform the test procedure, the test sample is placed in the carbonation assembly and placed on the Bottle shaker. The testing instrument comprises of an adjustable bottle shaker to evade bottle slippage at the time of shaking. The device is fabricated with the stainless steel material. It is easy to use a device which easily accommodates a bottle of standard size on the instrument.

Presto's Auto Clave is a testing instrument used to sterilize various medical tools in microbiology labs, medicine, veterinary science, mycology, and dentistry, etc.

MODELPAC- 0123

Prestos Auto Clave is a testing instrument used to sterilize various medical tools in microbiology labs, medicine, veterinary science, mycology, and dentistry, etc. It is a very useful instrument which is widely used in microbiology labs. PRESTO Autoclave is made of high-grade stainless steel material with radial locking system. The inner chamber of the instrument is fabricated with 304-grade stainless steel material, and the outer body of the machine is designed with thick stainless steel material, and the head is made up of mild stainless steel material. The testing machine is provided with a pressure gauge along with the radial locking system.

One of the most essential factors, plastic container manufacturers keep in mind while designing their products is that their products should be intact and free of any vacuum leaks. Testing their products against vacuum leaks will also help them to ensure the leak integrity of their products. A small leak present in the product would lead to problems. Therefore, we at Presto have designed one of the highly advanced lab testing instruments known as the vacuum leak tester for the plastic container-prima series.

MODELPVL - 0461 - Prima

The Presto Vacuum Tester is a tabletop device designed to measure the vacuum resistance strength of rigid plastic containers. This device enables an increasing vacuum to be generated inside the container in a controlled way and captures the maximum level of vacuum that the container can withstand before distortion or failure.

Vacuum leak tester for PET Bottles is a proficient testing instrument specially designed for evaluating the seal integrity and leak resistance in all type of PET Bottles. It can be used in various industries, wherever the containers are utilized as a medium of transporting manufactured products or used for its storage including food, medicines, beverages etc. The vacuum leak tester by presto is highly standardized to conduct various sort of leak integrity testing and contribute to accurate Quality assurance.
MODEL PVL 0131 (Prima)
The Presto vacuum leak detection system specifically designed for PET bottles is a high-quality machine that consists of a clear acrylic vacuum chamber and system, a control valve, and an indicator gauge. Bottles to be tested are simply placed in the clear acrylic vacuum tank, the lid is closed and vacuum engaged. You can then choose which testing method to use based on your companys standards and requirements. A complete test can be accomplished in just a matter of seconds with immediate results!
A vacuum leak tester is considered to be one of the quality lab testing instruments used in the PET bottle industry. By testing the vacuum leaks present in PET bottles, manufacturers can easily ensure accuracy in the product. The digital model of the Presto vacuum leak tester for PET bottles comes with a microprocessor-based timer for the accuracy and repeatability of the testing results. The samples will be tested through an easy vacuum mechanism and users will get accurate testing results. The powder-coated Havel gray and blue combination finish will make this vacuum leak testing instrument more durable. With the use of this high-quality lab testing instrument, manufacturers will easily conduct vacuum leak tests and ensure accuracy in the testing results.
If you are working in the PET bottle industry, then this vacuum leak testing equipment will work best for you in determining the leak integrity of the product. By using this high-quality lab testing instrument the manufacturers of the bottle industry can deliver leak-resistant products to the customers. This will eventually help to reduce the high product rejection rates that occur due to poor quality products.
Presto is a leading vacuum leak tester manufacturer and offers the best vacuum leak tester price to clients. This digital vacuum leak tester model will help the users to view the testing results on a digital display. Besides this, users can also monitor pressure and timer with the help of digital controls embedded in this lab testing instrument. It comes with an in-built calibration facility and vacuum gauge for easy pressure monitoring. Manufacturers of the PET bottle industry can effectively make use of this lab testing instrument to test the vacuum leaks present in the PET bottles.
Testing Standards (Methods):ASTM D 4991-07(2015) Destructive Leak integrity test by vacuum method for empty rigid containers. Leaks are detected under differential pressure conditions.ASTM F 2338-09(2013) Non-destructive Detection of Leaks in Packages by Vacuum Decay Method.ASTM D6653 - Test methods for determining the effects of high altitude on packaging systems by vacuum method.ASTM D5094 - Test methods for gross leakage of liquids from containers with threaded or lug-style closures for rigid and semi-rigid containers.ASTM D3078 - Test Method for Determination of Leaks in Flexible Packaging by Bubble Emission.

Presto Vacuum leak detection system is now available in Prima series. With HMI Touch Screen Display and fully automatic controls, one can ensure accuracy with repeatability and take data acquisition for the various tests. The Vacuum Tank is specially designed to conduct leak integrity testing of large sized packages in any of the testing mediums.

MODELPVL-0131-Prima

The Vacuum Tank (Chamber) is capable of various testing standard using both dry and wet medium. The specimen is to be placed inside the chamber in any form of medium and close the airtight sealed lid. After that using the advanced-level of technology based touchscreen display area, you can set the parameters, such as pressure, time, etc. and start the test. The test can be conducted as per any standard mentioned above including, Bubble emission test, dry chamber test, high altitude test etc.

Testing Standards (Methods):ASTM D 4991-07(2015) Destructive Leak integrity test by vacuum method for empty rigid containers. Leaks are detected under differential pressure conditions.ASTM F 2338-09(2013) Non-destructive Detection of Leaks in Packages by Vacuum Decay Method.ASTM D6653 - Test methods for determining the effects of high altitude on packaging systems by vacuum method.ASTM D5094 - Test methods for gross leakage of liquids from containers with threaded or lug-style closures for rigid and semi-rigid containers.ASTM D3078 - Test Method for Determination of Leaks in Flexible Packaging by Bubble Emission.

Testing Specimen Types:Stand-up pouches, packages with modified atmosphere packaging (MAP), rigid trays, vacuum skin packs, thermoform packages, sachets, flow wraps, form fill seal (VFFS) and reclosable packages.

Presto Vacuum leak detection system is now available in Prima series. With HMI Touch Screen Display and fully automatic controls one can ensure accuracy with repeatability and take data acquisition for the various tests. It is capable of testing both Bottles/containers and other packages. The testing medium can be air. It is the best instrument for accurate and quick testing of small to medium sized containers or packages.
Registered Design Patent No. 361206-002

MODELPVL-0132- Prima

Testing Standards (Methods):

The testing instrument Laminar Air Flow Bench is provided with an HEPA-filtered work area which is essential to maintain dust particles and bacteria free clean air environment.

MODELPLAFB-0124

Presto's Biochemical oxygen demand incubator also known as BOD incubator is a very useful testing instrument which is introduced with technology based features to set the desired temperatures easily.

The Presto Ultra Low Temperature Deep Freezer is equipped with an air cooled compressor and CFC free refrigerators. These systems are installed to provide efficient cooling and consistent flow in the cabinet.

MODELULT - 244

The Presto Ultra Low Temperature Deep Freezer is equipped with an air cooled compressor and CFC free refrigerators. These systems are installed to provide efficient cooling and consistent flow in the cabinet. High capacity air cooled condensers with aerodynamically shaped fans and washable condense filters keep the environment within the freezer free of fine dust.

The neck of the PET bottles has a greater value as compared to bottle flakes hence it is important to separate the bottle necks from the rest of the bottles. The Presto's Bottle neck cutter is widely used in industries for cutting the neck of the bottles from the rest of the bottle.

MODELPPNC-0115

The neck of the PET bottles has a greater value as compared to bottle flakes hence it is important to separate the bottle necks from the rest of the bottles. The Prestos Bottle neck cutter is widely used in industries for cutting the neck of the bottles from the rest of the bottle. The instrument is used for single handed operation of bottle neck cutting. It is a tool that is designed by skilled engineer and is manufactured using best quality raw materials that help in precise and accurate cutting operation.

The Prestos Bottle neck cutter is a highly precise and handy instrument that has capacity to cut the necks of the bottles with a diameter of 28 mm. It provides quick and easy cutting with simple operation. There is very less effort required for the operation with this instrument.

PI TAPE is easy to use tool that permits the diameter of a cylindrical item to be determined in single & quick measurement with precision.

MODELPPI-0167

Cap Pullout tester is used to determine the maximum pull-out strength which is required to pull out the cap of the bottles. It is an important principle used to ensure the quality and the strength of the cap of the bottles.

MODELPPTC - 0126

Flip Cap Opening Tester is utilized for assessing the flip cap strength, which is an important criterion for quality assurance of the product. The flip cap quality is widely tested in the design and manufacturing of PET packaging bottles.

MODELPFCOP - 101

Bottles or containers of today are getting updated with flip cap openers. The use of normal screw bottle caps has been reduced with more easy and advanced cap designs in the market. But with new upcoming design, new strategies should also be appointed for testing its quality. Flip cap opening tester by Presto is designed to test the strength amount utilized for opening the flip cap of bottles and containers.

Impact testers are used widely to determine the impact resistance, breakage and various strength related characteristics of glass products to ensure that they are strong enough for their intended use.

MODELPITGB -0140

Impact testers are used widely to determine the impact resistance, breakage and various strength related characteristics of glass products to ensure that they are strong enough for their intended use. Prestos Impact tester for Glass Bottles offers a reproducible strength to evaluate the impact resistance of glass bottles and containers. The testing instrument offers highly reliable and accurate test results.

Impact test on Glass Bottles can be tested on large number of products like:

• Cosmetic bottles and perfume bottles.
• Beer Bottles or Food jars
• Glass products which are used for various trading purposes like stemware.

The Presto Fill Height Syringe is a valuable laboratory tool that can save time and improve accuracy during the container fill height and volume measurements.

MODELPFGH - 0168

The Seal integrity tester for pouches is used for testing the intactness of the pouches that are used for packaging of a variety of products. If these pouches are not intact, the products can leak from them and can cause spillage.

MODELPSIT - 60

This instrument is used for calibration of vacuum gauges and other sensing, transmitting and recording vacuum instrument. The 'PRESTO' Vacuum Gauge Tester is a quick and convenient method of calibration free from the disadvantages of using the fragile mercury manometer.

MODELModel No - PDT 55

This instrument is used for calibration of vacuum gauges and other sensing, transmitting and recording vacuum instrument. The 'PRESTO'Vacuum Gauge Testeris a quick and convenient method of calibration free from the disadvantages of using the fragile mercury manometer.The main components of the tester are :

SCREW PUMP to generate the vacuum in the tester conveniently and precisely. It is of adequate capacity and is operated by turning the spoked handle. FREE PISTON Assembly of special steel, hardened, tempered ground and lapped to accurate size and very fine surface finish to provide true floating action. The free piston is suspended vertically downward from a rigid frame and is connected by a pipe to the screw pump. A CARRIER weight is attached to the free piston for taking more weights.

A color spectrophotometer is an instrument designed for physical sample analysis via full spectrum color measurement.Color spectrophotometers offer a higher level of flexibility and versatility than colorimeters due in part to the fact that they offer multiple illuminant/observer combinations and can operate in multiple geometric arrangements.

A color spectrophotometer is an instrument designed for physical sample analysis via full spectrum color measurement.Color spectrophotometers offer a higher level of flexibility and versatility than colorimeters due in part to the fact that they offer multiple illuminant/observer combinations and can operate in multiple geometric arrangements. With the D/8 geometric optical illumination recommended by CIE , the instruments can measure SCI/SCE reflectance data of sample , and can measure and indicate all color difference formulas and color indexes in various of color spaces accurately. Conforms with CIE No.15, GB/T 3978, GB2893, GB/T 18833, ISO7724/1, ASTM E1164, DIN5033 Teil.