Listing ID #812285
Ask for more detail from the seller
Contact SupplierWe are a leading Alloy Steel Rolls manufacturing company with ladle refining and vacuum degassing facility in North India, growing at a fast pace since its inception in the year 1985. We are proud of our strategic achievements. These Rolls are alloyed with Nickel, chromium, Manganese and molybdenum with carbon content between 0.50% and 2.00% as well as little amount of vanadium is also added for the improvement of better microstructure. So these are capable of a higher mechanical strength with thermal and wear resistance. These rolls undergo a sophisticated multi-stage high temperature Heat – Treatment (Double Annealing followed by tempering cycle) to give the combination of hardness, toughness and wear resistance required for the particular application. The lower carbon grades will have a structure consisting of ferrite and fine pearlite which, as the carbon content is raised, transitions to a fully pearlitic structure and on to one containing free carbide in a matrix of fine pearlite and even some bainite for the highest carbon grades. All rolls of this material are statically tangentially single poured.
Type of Rolls |
Typical hardness (shore *C) |
---|---|
ACS 30 |
28-33 |
ACS 33 |
30-35 |
ACS 38 |
35-40 |
ACS 43 |
40-45 |
ACS 48 |
45-50 |
ACS 52 |
50-55 |
C% |
Mn% |
Si% |
Cr% |
Ni% |
Mo% |
V% |
S% |
P% |
---|---|---|---|---|---|---|---|---|
0.50 |
0.50 |
0.30 |
0.60 |
0.30 |
0.10 |
0.20 |
0.45 |
0.45 |
2.00 |
1.20 |
0.60 |
1.50 |
1.50 |
0.60 |
Max |
Max |
max |
Tensile Strength |
400 N/mm |
25 Tons / Sq. in. |
---|---|---|
Bending Strength |
850 N/mm |
55 Tons / Sq. in. |