ANAGHA SALVAGE RUST, RUST CONVERTER

RECOMMENDED FOR:

? Pharma & Food industry?

? Automobile Industry, Locomotives and Railways?

? Shipping Industry, Steel plants, Industrial Fabrications, ?

? Chemical Plants and Structures, ?

? Fertiliser Industry, Soap & Detergent Industry?

? Metal Fabricators, Building RCC structures, ?

? Petroleum and Petro - Chemical plants, ?

? Port & Docks, Bridges & Dams.

PERFORMANCE SALVAGE RUST consists of two aspects. ?

? In the first aspect, on application of the product to the surface of iron the rust is converted into an organo - metallic complex and passivated.?

? In the second aspect an elastomeric Co-polymer with cross linking compounds form a film which is impermeable to air and moisture. These two aspects stop the process of rusting of iron by converting and protecting. ?

? Depending upon the degree of rusting of the iron surface, on application of the product, the product gives rise to black, grey or brown film. Iron lower hydroxide gives black film, iron higher hydroxide gives grey film and Iron higher oxide gives brown film.

APPLY AS FOLLOWS

? Remove as far as possible the flaky and loose rust, old paint by the use a wire brush. The loose particles on the surface are then removed by the air wash or water wash.. Grease and oil are removed by a detergent wash followed by a water wash. Do not remove all traces of rust since it can be converted.

? Transfer a small portion of Rust converter in a non-metallic container. After use do not pour back the unused portion to the original container, this will prevent contamination of the product.

? Anagha Rust Convertor is an under coat and accepts all types of Top Coats like enamel, epoxy, polyurethane, polyester etc.

*Permanent lasting after application

EDGE OVER INTERNATIONAL PRODUCTS:-

? Has a neutral pH value of 7. ?

? Shelf life of 3 years in packed condition. ?

? Thixotropic. (No Stirring required). ?

? Use natural anti – oxidants which are eco – friendly. ?

? Certifications available regarding its product performance, non-toxicity, hence, its authenticity. ?

SALVAGE RUST passes a per IS 13515 Salt Spray Test : 3% NACL spray test in a salt fog corrosion testing chamber for 30 days. No rusting observed. Immersion Test : Treated part immersed in distilled water for 30 days , no rusting observed. Acid Leach Test : PH of solution is 4.7, OK Temperature Resistance Test : 80 C for 60 minutes, OK Scratch Test : above 1000 gms, OK Adhesion Test : Passes the test.