Battery Protector and Sealer, Packaging Type : Can

Features of BPS 4536 Battery Protector And Sealer

• BPS 4536 Battery Protector & Sealer is an aerosol product for sealing and coating the terminals of a battery and eliminating the formation of acid salt corrosion that is typically found when terminals are untreated. Battery Protector is designed to protect battery terminals from corrosion, the leading cause of battery failure, and to maintain the batteries peak performance level. Battery Protector provides a dry, lead-free protective coating that keeps moisture, salts and road grime from corroding metal contacts. It maximises performance, provides long lasting protection and extends battery life.
• Prevents battery drain 
• Improves electrical flow

Application of BPS 4536 Battery Protector And Sealer

Battery protector used in

• Batteries
• Cables
• Terminals

Direction of BPS 4536 Battery Protector And Sealer

• Product should be sprayed in a well-ventilated area.
• Clean parts to be treated with RMC Battery Cleaner
• Shake can with ball agitator for one minute.
• For best results, aerosol can should be at room temperature before spraying.
• Holding can 8 to 10 inches from the surface to be coated, press the nozzle and discharge the product onto the terminal areas.
• The product discharges as a heavy film. 5. For best results, apply two light coats.

Precaution of BPS 4536 Battery Protector And Sealer

• Contents are Extremely Flammable and Under Pressure,
• Prevention Avoid breathing dust/fume/gas/mist/vapors/spray
• Use only outdoors or in a well-ventilated area Wash face, hands and any exposed skin thoroughly after handling Wear protective gloves/protective clothing/eye protection/face protection Keep away from heat/sparks/open flames/hot surfaces. – No smoking
• Do not spray on an open flame or other ignition source Pressurized container: Do not pierce or burn, even after use Precautionary Statements –
• Response If exposed or concerned: Get medical advice/attention Specific treatment (see supplemental first aid instructions on this label)
• If in Eyes : Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing If eye irritation persists: Get medical advice/attention If skin irritation occurs: Get medical advice/attention
• If On Skin (or hair): Remove/Take off immediately all contaminated clothing.
• Rinse skin with water/shower Wash contaminated clothing before reuse
• If Inhaled : Remove victim to fresh air and keep at rest in a position comfortable for breathing
• If Swallowed: Immediately call a POISON CENTER or doctor/physician Do NOT induce vomiting.
• Dispose of contents/container to an approved waste disposal plant

Storage of BPS 4536 Battery Protector And Sealer

• Products shall be ideally stored in a cool, dry location in
• unopened containers at a temperature between 8_ to 28_C
• (46_ to 82_F) unless otherwise labeled. Optimal storage is at
• the lower half of this temperature range. Store locked up. Protect from sunlight.
• Store in a well-ventilated place.keep container tightly closed.
• Keep Out of Reach of Children