DASH XXS AUTOCLAVABLE VERSION

MaterialCeramic
Operating Temperature-40°F to +185°F (-40°C to +85°C)
ApplicationsSurgical instrument management, Small asset tracking, Source tagging
IP RatingIP69K
Supply TypeManufacturer, Exporter, Supplier, Retailer, Trader
Preferred Buyer Location All over the world

Product Details

ApplicationsSurgical instrument management, Small asset tracking, Source tagging
IP RatingIP69K
Operating Temperature-40°F to +185°F (-40°C to +85°C)
Availability0.004 oz (0.12 g)
MaterialCeramic
IP classificationIP68
Data retentionUp to 50 years
RF air protocolEPC Global Class1Gen 2; ISO18000-6C
Compression strengthPackaging dependent
IC typeAlien Higgs-3
Dimensions/tolerance (mm)6.75 x 2.08 x 2.08 (+/- 0.15)
Memory – expected read / write cycles100,000 cycles at 77°F (25°C)
Standard compliancyRoHS (EU Directive 2002/95/EC) , CE (EU version)
Storage humidity5%-95% non-condensing
FunctionalityRead / write (user programmed)
Operational humidity5%-95% non-condensing
Operating frequencyUHF 902-928 MHz (US); 866-868 MHz (EU)
Read rate400 tags per second for 96-EPC bit number
Memory configuration96-EPC bits; 512-bit user memory
Warrenty (limited)1 year
Read range on metal, 4W EIRP (2W ERP)Up to 2 ft (0.6 m)
FDA classClass I
AttachmentGlue, embedded
Application temperature-67°F to +302°F (-55°C to +150°C)
Application temperature (MIL STD 810-F)-40°F to +302°F (-40°C to +150°C)
Read range on metal (2W ERP)Up to 3 ft (0.9 m)
Dimensions/tolerance(in)0.26 x 0.08 x 0.08 (+/- 0.012)
PolarizationLinear
Operational temperature (MIL STD 810-F)-40°F to +185°F (-40°C to +85°C)

Cleaning and Disinfection Process (ANSI/AAMI ST79)
Chemical sterilization for decontamination Liquid chemical sterilants include glutaraldehyde, hydrogen peroxide, hydrogen peroxide-peracetic acid combinations, sodium hypochlorite, and peracetic acid	Pass
Thermal (hot water) disinfection• Washer-sanitizers, washer-decontaminators, utensil washers, and cart washers reduce microbial contamination by means of cleaning agents, hot water, rinsing, and drying. • Pasteurization equipment provides cleaning and high-level disinfection at water temperatures of 65°C to 77°C (150°F to 170°F) for a contact time of at least 30 minutes. • Washer-disinfectors provide a cycle of cleaning, rinsing, disinfection, and drying at temperatures that are usually higher than those of washer-sanitizers	Pass
Thermal sterilization for decontamination Saturated steam can be used to decontaminate devices capable of withstanding high temperatures (121°C to 135°C [250°F to 275°F]) and pressures (16 to 35 psig). Washer-sterilizers provide cleaning and rinsing followed by exposure to saturated steam at temperatures of 121°C to 135°C (250°F to 275°F).	Pass
Ultrasonic cleaner 3KHz for 30 min	Pass
Dry heat sterilization 160°C for 2h, or 170°C for 1h, or 180°C for 30min	Pass
Disinfection by light C wave ultraviolet and wavelength range is from 200nrn to 275nrn	Pass
Detergent enzyme cleaner	Pass
Autoclave sterilization 134 °C and 0.6 Mpa for more than 1000 cycles	Pass