Energy Measurement Module

Get Latest Price

Voltage drop during Power ON0.4 V or less
Level 3 as per IEC1000-4-4Immunity to Radiated RF
40Hz to 70Hz
Number of Inputs3 phase alternating current and voltage input
Supply TypeManufacturer, Exporter, Supplier, Retailer
Preferred Buyer Location All over the world

View More Details

Send Enquiry

Company Information

Renu Electronics Pvt. Ltd.

Baner, Pune, Maharashtra

View Number

Member Since 17 Years
Nature of Business Retailer

Ask for more detail from the seller

Contact Supplier

Report incorrect details

View Company Details

Product Details
Company Details

Voltage drop during Power ON0.4 V or less
Number of inputs
24 VDC (Max : 28 VDC)Input Impedance
DIN rail mountingSize
0 to 5 VDCLogic ‘1’ Voltage
Number of Inputs3 phase alternating current and voltage input
+/- 2 % of Full Scale 5A * CT ratio. Active Power
Single Phase Voltage
Operating
Maximum Load current500 mA
0° to 60° CStorage
Power :+10 to +30 VDC
Communication Port :2 wire RS485
+/- 2 % of Full Scale ( 230V * 5A * CT ratio )Measurable Frequency range
10% to 90% (Non condensing)Mounting
+/-3.45V ( i.e. 1.5 % of rated voltage 230 V )Current
Level 3 as per IEC1000-4-4Immunity to Radiated RF
40Hz to 70Hz
4 mALogic ‘0’ Voltage
Level 3 as per IEC1000-4-3Immunity to Conducted RF
5.6 kWRated Input Current
Level 3 as per IEC1000-4-2Immunity to Transients
100 W x 70 H x 35 D mmImmunity to ESD
4Rated Input Voltage
Number of Outputs4 (NPN Transistor)
Level 3 as per IEC1000-4-6Emissions
-20° to 80° CHumidity
12 to 28 VDC

Features
	Low cost compact 3 phase Energy measurement module
	3 phase voltage input up to 300 Vrms (Line-Neutral) and current input up to 5 A can be measured
	Measures Voltage, Current, Frequency, Active Power, Reactive Power, True Power, Average Power and Power Factor
	Facility for 4 bi-directional digital inputs and 4 digital NPN outputs (open collector)
	High Speed Modbus RTU (Slave) communication
	2 wire RS-485 Communication port (isolated) on pluggable terminal block
	User definable Address, Baud rate and Parity through convenient DIP Switches
	LED indication for each Input and Output, COM port and Power ON
	No configuration software required

Function
FIOD-EN-0404-C measures 3 phase Energy and adds digital capability to a PLC / SCADA system.The module has 3 phase isolated Voltage and Current inputs . It also has 4 digital inputs and 4 digital outputs that can be read and controlled by the Modbus master. The digital inputs and outputs are isolated from the host device. The module has one RS485 (2 wire) communication port to connect to the host device. Communication settings like baud rate, parity and station ID can be set by DIP switches.

Communication with Host
The module supports Modbus RTU (Slave) Protocol. It communicates with the Host through 2 wire RS 485 Network. In case of communication failure with Host, the user can configure watchdog time-out and failure mode for the outputs.

Interested in this product? Ask for more details & Latest Price from seller

Send Enquiry

Share your requirements for a quick response!