Renu Electronics Pvt. Ltd. Pune, Maharashtra

• Power+ 24V DC ± 10%
• BezelIP 65 rated keypad
• Operating Temp.0o to 50o C
• Storage Temp.-20o to 80o C
• Humidity10% to 90% (Non-condensing)
• CommunicationTwo communication ports. (User configurable)
• Immunity to ESDas per IEC61000-4-2
• Immunity to Fast Transientsas per IEC61000-4-4
• Immunity to Radiated electromagnetic fieldas per IEC61000-4-3
• Immunity to Conducted disturbancesas per IEC61000-4-6
• Surgeas per IEC61000-4-5
• Radiated emissionas per EN61000-6-4
• Analog Inputs: Voltage Current RTD 0-100 mV, 0-50 mV 0-20 mA, 4-20 mA 3-wire RTD (Alpha1, Alpha2)

Features DIN Rail or Panel Mounted compact Current Isolator Isolated Input, Output and Power Supply (3 Port Isolation) 4-20 mA Input 4-20 mA isolated output Output zero and span set by use of potentiometer Additional isolated + 24V DC power source for loop powering

• Power+ 24V DC ± 10%
• BezelIP 65 rated Touch Screen
• Operating Temp.0o to 50o C
• Storage Temp.-20o to 80o C
• Humidity10% to 85% (Non-condensing)
• Communication PortsTwo serial ports.  (RS232/RS422/RS485/CMOS Levels supported)
• Immunity to ESDas per IEC61000-4-2
• Immunity to Fast Transientsas per IEC61000-4-4
• Immunity to Radiated electromagnetic fieldas per IEC61000-4-3
• Immunity to Conducted disturbancesas per IEC61000-4-6
• Surgeas per IEC61000-4-5
• Radiated emissionas per EN61000-6-4

• Power :+10 to +30 VDC
• Communication Port :2 wire RS485
•  Operating
• 4Rated Input Voltage
• 24 VDC (Max : 28 VDC)Input Impedance
• 5.6 kWRated Input Current
• 4 mALogic ‘0’ Voltage 
• 0 to 5 VDCLogic ‘1’ Voltage
• 12 to 28 VDC 
• Number of Inputs3 phase alternating current and voltage input
• +/-3.45V  ( i.e. 1.5 % of rated voltage 230 V )Current
• +/- 2 % of Full Scale 5A * CT ratio.  Active Power
• +/- 2 % of Full Scale  ( 230V * 5A * CT ratio )Measurable Frequency range
• 40Hz to 70Hz 
• Number of Outputs4 (NPN Transistor)
• Maximum Load current500 mA
• Voltage drop during Power ON0.4 V or less
• 0° to 60° CStorage
• -20° to 80° CHumidity
• 10% to 90% (Non condensing)Mounting
• DIN rail mountingSize
• 100 W x 70 H x 35 D mmImmunity to ESD
• Level 3 as per IEC1000-4-2Immunity to Transients
• Level 3 as per IEC1000-4-4Immunity to Radiated RF
• Level 3 as per IEC1000-4-3Immunity to Conducted RF
• Level 3 as per IEC1000-4-6Emissions

Low cost compact Analog IO modules with DIN rail mounting Programmable inputs allow same modules to accept RTD, Thermocouple, mA, mV and Volts 12 bit resolution 4 universal analog inputs and 2 analog outputs High Speed Modbus RTU (Slave) communication

Features DIN Rail or Panel Mounted compact Protocol Converter DB9 Serial ports in any combination of RS232 / RS422 / 2 or 4 wire RS485 / CMOS Connects PLC to PLC or PLC to a Modbus Network (as a Master or Slave) Allows data sharing between PLC, Invertors, Controllers and other network devices Common model for connecting different devices. Several PLC and Invertors supported Direct connection to the Programming terminal saves additional hardware Low power consumption of only 2.5 Watts Common Programming software for the entire Gateway family.........FREE!! CE with UL certification