High Performance Butterfly Valve, Size : 2”~48”(50 Mm ~1200mm)

Butterfly Valve, sizes 2″ through 48″ ANSI 150, 2″-48″ ANSI 300, 3″-24″ Suitable for high temperature, high pressure, fire, corrosion and other harsh conditions of use and applied to use in petroleum, natural gas, chemical, refining, energy and power, ultra-low temperature for the process off site and the role of regulating valve.

Design Details

• Design, Mfg. Std. API 609
• Face To Face Dimension : API 609 (category B) / ANSI B16.10
• Testing Standard : API 598 / API 607 / BS 6755 Part I & Part II
• Top Flange ISO 5211.2 (Provided On Bracket)
• Size Range 80 NB To 600 NB
• Operating Temperature – 25° C — +200° C. (depending On MOC)
• Pressure Rating : ANSI Class 150 PN10/PN16
• Flange Standard ANSI 150 RF As Per ANSI B 16.5
• Body Type Wafer, Wafer Lugged (with Thru Or Tapped Holes)
• Disc Type : Double Eccentric
• Seat Type Soft Seat / Metal Seat
• Seat Leakage : Class VI (As Per ANSI / FCI 70-2)
• Flow Direction : Shaft Side To Down Stream
• Body Matl. : WCB / CF8 / CF8M / CF3 / CF3M / CK20
• Disc Matl. : WCB / CF8 / CF8M / CF3 / CF3M / CK20
• Seat Matl : PTFE, PEEK Others On Request
• Shaft Matl AISI 410 / SS 316 SH / 17-4PH
• Standard Pressed Hand Lever 80 NB To 200 NB
• Gear Boxes 250 NB To 600 NB (Optional On Smaller Sizes)
• Operation Actuator (Elect. / Pneumatic) available for entire range.

Features

• FMC- features removable Shaft/Disc for ease of repair, Spline Drive Shaft to Disc Connection
• One-Piece shaft design is Blow-Out Proof per ATEX.
• Patented Seat Retainer Ring attaches without bolts allowing complete uninterrupted seal face.
• Seats are available in PTFE, Graphite PTFE and Metal.
• GRTFE feature Hard Chrome Plated Disc Edge and Shaft for extraordinary service life.
• Standard material is A216 WCB、A351 CF8、A351 CF8M, Duplex and Super Duplex SS
• FMC- offers Bubble Tight Bi-Directional Seating.

Body

Precision cast bodies in virtually any alloy allow customers to utilize proper materials for virtually any application. Castings conform to all applicable ASME codes. Certified independent testing can be performed when requested or required such as RT and PT. Bodies are available in Wafer, Lug, Double Flanges .

Disc

FMC is designed to have minimal deflection and movement under pressure which reduces torque and improves cycle life. The discs tapered edge and offset shaft journal generates a “cram” motion allowing for a release from the seat within the first few degrees of opening.

Shaft

Our hardened 17-4 one piece design provides shaft strength and integrity under the most severe conditions. Other shaft materials are available depending upon application.

Seat

OUR seat is machined to lock between the body and retention ring but is allowed to move under pressure. This allows us to utilize solid seats giving maximum disc edge coverage, high cycle life and very low torque without the requirement for rubber O-ring energizers or metal back up support.

Gland

Our recessed gland packing eliminates the requirement for mounting kit and reduces overall package height. Our cup and cone design gland flange and packing compression guide allows an even compression of packing even if field adjustments are made incorrectly.

Extended Neck

Bonnet to flange clearance is a minimum of 2” allowing for piping insulation on all sizes of valves.

Seat Retention Ring

Our highly engineered retainer plate assures customer of proper seat stability and allows for full rated bi-directional, dead end service. The HP series seat retention ring conforms to the latest revisions of API 609 accommodating spiral wound gasket sealing elements to fall outside the bolting area.

Bonnet

Allows for direct mounting of all types of actuation. Standard drilling conforms to Kv industrial standards. ISO drilling is also available upon request.

Packing

Multi layered “cup and cone” PTFE packing allows for even compression against shaft and shaft journal area providing a positive seal even under high cycles. Multi layered graphite packing is available for metal seated and fire safe valves.

Blowout Proof Shaft Retention

Engineered to be one of the safest valves in the market our shaft retention system meets API requirements. Shaft retention system allows the gland flange and follower to slide up and down a machined recessed portion of the shaft. If a shaft were to shear our system prevents hydraulic force from projecting the shaft keeping it safely retained above the packing.

Bearing

• Full length upper and lower bearing materials are constructed of 316 S.S. impregnated with either PTFE or Graphite depending on Service conditions.
• Pressure Rating ANSI 150 – 285 PSI ANSI 300 – 740 PSI ANSI 600 – 1440 PSI
• Testing all valves are 100% tested per API 598 and documented. Standard Testing reports and MTR’s can be supplied at any time at no charge. Customized testing can also be performed based on customer’s requirements. Additional materials are available. Contact FMC.