We bring forth a quality range of Magnetic Roll Separators in the market. Magnetic Roll Separator, offered by us, is suitable for very fine low magnetic minerals. These Magnetic Roll Separators use magnets in various sizes made up of domestically produced alloys of rare earth metals. These Magnetic Roll Separators feature automatic belt tensioning and tracking, and tool free belt change.
Working Principle
Roll Magnetic Separators consist of two rolls, one of which is magnetics. There is a belt between them to carry the ore into the magnetic field. The movement of the belt is controlled by a motor fixed to one of the rolls. The rotational speed of rolls can be adjusted according to the material properties.
The material to be processed is conveyed to the belt by vibrating feeder at a required rate. Feeding rate can be controlled by adjusting the vibration on feeder. A separator blade has been set in order to be able to collect separated products in different places and to adjust the product properties in a desired manner.
Technical Features

• Standard 2.5, 2, 1.5, 1, 0.75, 0.5 and 0.25 meter wide magnetic roll. Also available in a laboratory scale model with readily interchangeable rolls of 100 mm length.
  
• Supplied with a vibrating feeder to suit the roll width.
  
• Simple conveyor belt tensioning and tracking system accessible at the sides of the machine.
  
• Fixed or-variable speed roll drive options. Fractional HP motor having voltage and frequency to suit user.

Operating variables are

• Field strength (measured indirectly and controlled by amp adjustment of the electromagnet) typically up to 15,000 gauss.
  
• Pole gap (closer the gap higher the field strength), typically 2mm.
  
• Roll speed ( normally fixed and only adjusted by pulley and belt changes).
  
• Splitter position (determined by visual observation of the fan).
  
• Feed temperature will affect magnetic susceptibility.
  
• Feed rate typically 2.5tph

Roll Construction
The magnetic rolls incorporated in our machines have been specially designed and developed to generate exceptionally high magnetic field and gradient. The rolls which are built using rare earth Nd-Fe-B are manufactured to very low dimensional tolerances. The magnetic rolls incorporated in our machines have been specially designed and developed to generate exceptionally high magnetic field and gradient. The rolls which are built using rare earth Nd-Fe-B is manufactured to very low dimensional tolerances.
Applications

• Quartz
  
• Silica
  
• Carbide
  
• Chromite recovery
  
• Graphite Upgrading
  
• Silica Sand
  
• Alumina
  
• Abrasive and refractory
  
• Raw materials cleaning
  
• Magnesite beneficiation
  
• Copper-nickel ore Pre- Concentration
  
• Manganese and glass send beneficiation
  
• Andalusite and pyrophyllite beneficiation
  
• Diatomaceous earth cleaning and kyanite cleaning
  
• Iron ore beneficiation
  
• Diamond beneficiation
  
• eldspar
  
• Dolomite
  
• Glass raw materials cleaning
  
• Wollastonite beneficiation
  
• Magnesite
  
• Quartzite etc.
  
• Bauxite cleaning
  
• Feldspar cleaning
  
• Bauxite Upgrading
  
• Recovery of Metals from Slag.
  
• Ceramic raw materials cleaning
  
• Metal value recovery from waste
  
• Ultra High Purity Quartz Cleaning.
  
• Flintclay and Graphite beneficiation
  
• Removal of ferro silicates from limestone Magnesite etc
  
• Selective separation of garnet/ilmenite/rutile/zircon recovery

Features

• Compact construction.
  
• Single or multi stage separation.
  
• Fully enclosure with dust extraction port.
  
• Designed for easy maintenance.
  
• Automatic belt tensioning and tracking.
  
• Tool free belt change.

Uses
Induced Roll Separators are primarily used for separating or concentrating minerals or materials of low magnetic susceptibility. Uses include extraction of iron or chromium bearing minerals from silica sand, the concentration minerals such as wolframite, the removal of paramagnetic minerals such as Iron Titanium Oxide (Ilmenite, FeTiO₃), Iron Carbonate (siderite, FeCO₃), etc., from valuable non-magnetic minerals, and purification of dry granular chemical compounds and abrasives.These self-cleaning magnetic separator selectively removes magnetic components out of a conveyed material and discharges them as distinct and clean material. Field intensity is adjustable for selective recovery. Very high gauss of 20,000 is achieved by the magnetic separator.
The throughput and degree of separation depends upon the following factors

• The susceptibility of the magnetic fraction - throughput is reduced for materials of lower magnetic susceptibility.
  
• The particle size - for most materials the maximum size which can be satisfactorily treated is 3mm. For the treatment of dry materials up to 50 mm in size, electromagnetic multi-channel Pulley or Drum Separators are available (details available upon request). The presence of fine particles (particularly those less than 30 microns) reduces throughput.
  
• The bulk density - higher values increases throughput.
  
• The flow characteristics - these are determined by particle shape, surface condition and moisture content. Better flow characteristics increase throughput.
  
• The proportion of magnetics - a high percentage of magnetics may reduce throughput.

We bring forth a quality range of Magnetic Roll Separators in the market. Magnetic Roll Separator, offered by us, is suitable for very fine low magnetic minerals. These Magnetic Roll Separators use magnets in various sizes made up of domestically produced alloys of rare earth metals. These Magnetic Roll Separators feature automatic belt tensioning and tracking, and tool free belt change.
Working Principle
Roll Magnetic Separators consist of two rolls, one of which is magnetics. There is a belt between them to carry the ore into the magnetic field. The movement of the belt is controlled by a motor fixed to one of the rolls. The rotational speed of rolls can be adjusted according to the material properties.
The material to be processed is conveyed to the belt by vibrating feeder at a required rate. Feeding rate can be controlled by adjusting the vibration on feeder. A separator blade has been set in order to be able to collect separated products in different places and to adjust the product properties in a desired manner.
Technical Features

• Standard 2.5, 2, 1.5, 1, 0.75, 0.5 and 0.25 meter wide magnetic roll. Also available in a laboratory scale model with readily interchangeable rolls of 100 mm length.
  
• Supplied with a vibrating feeder to suit the roll width.
  
• Simple conveyor belt tensioning and tracking system accessible at the sides of the machine.
  
• Fixed or-variable speed roll drive options. Fractional HP motor having voltage and frequency to suit user.

Operating variables are

• Field strength (measured indirectly and controlled by amp adjustment of the electromagnet) typically up to 15,000 gauss.
  
• Pole gap (closer the gap higher the field strength), typically 2mm.
  
• Roll speed ( normally fixed and only adjusted by pulley and belt changes).
  
• Splitter position (determined by visual observation of the fan).
  
• Feed temperature will affect magnetic susceptibility.
  
• Feed rate typically 2.5tph

Roll Construction
The magnetic rolls incorporated in our machines have been specially designed and developed to generate exceptionally high magnetic field and gradient. The rolls which are built using rare earth Nd-Fe-B are manufactured to very low dimensional tolerances. The magnetic rolls incorporated in our machines have been specially designed and developed to generate exceptionally high magnetic field and gradient. The rolls which are built using rare earth Nd-Fe-B is manufactured to very low dimensional tolerances.
Applications

• Quartz
  
• Silica
  
• Carbide
  
• Chromite recovery
  
• Graphite Upgrading
  
• Silica Sand
  
• Alumina
  
• Abrasive and refractory
  
• Raw materials cleaning
  
• Magnesite beneficiation
  
• Copper-nickel ore Pre- Concentration
  
• Manganese and glass send beneficiation
  
• Andalusite and pyrophyllite beneficiation
  
• Diatomaceous earth cleaning and kyanite cleaning
  
• Iron ore beneficiation
  
• Diamond beneficiation
  
• eldspar
  
• Dolomite
  
• Glass raw materials cleaning
  
• Wollastonite beneficiation
  
• Magnesite
  
• Quartzite etc.
  
• Bauxite cleaning
  
• Feldspar cleaning
  
• Bauxite Upgrading
  
• Recovery of Metals from Slag.
  
• Ceramic raw materials cleaning
  
• Metal value recovery from waste
  
• Ultra High Purity Quartz Cleaning.
  
• Flintclay and Graphite beneficiation
  
• Removal of ferro silicates from limestone Magnesite etc
  
• Selective separation of garnet/ilmenite/rutile/zircon recovery

Features

• Compact construction.
  
• Single or multi stage separation.
  
• Fully enclosure with dust extraction port.
  
• Designed for easy maintenance.
  
• Automatic belt tensioning and tracking.
  
• Tool free belt change.

Uses
Induced Roll Separators are primarily used for separating or concentrating minerals or materials of low magnetic susceptibility. Uses include extraction of iron or chromium bearing minerals from silica sand, the concentration minerals such as wolframite, the removal of paramagnetic minerals such as Iron Titanium Oxide (Ilmenite, FeTiO₃), Iron Carbonate (siderite, FeCO₃), etc., from valuable non-magnetic minerals, and purification of dry granular chemical compounds and abrasives.These self-cleaning magnetic separator selectively removes magnetic components out of a conveyed material and discharges them as distinct and clean material. Field intensity is adjustable for selective recovery. Very high gauss of 20,000 is achieved by the magnetic separator.
The throughput and degree of separation depends upon the following factors

• The susceptibility of the magnetic fraction - throughput is reduced for materials of lower magnetic susceptibility.
  
• The particle size - for most materials the maximum size which can be satisfactorily treated is 3mm. For the treatment of dry materials up to 50 mm in size, electromagnetic multi-channel Pulley or Drum Separators are available (details available upon request). The presence of fine particles (particularly those less than 30 microns) reduces throughput.
  
• The bulk density - higher values increases throughput.
  
• The flow characteristics - these are determined by particle shape, surface condition and moisture content. Better flow characteristics increase throughput.
  
• The proportion of magnetics - a high percentage of magnetics may reduce throughput.