Round PS Balls, for Decoration, Pattern : Plain

Listing ID #5031520

20 - 30 / kg

Get Latest Price

MOQ 1 Ton
ShapeRound
PatternPlain
ConditionNew
FeatureDurable, Good Quality, Pure Leather
ApplicationDecoration
Supply Type Exporter, Supplier

Preferred Buyer From : All over the world

View More Details

Send Enquiry

Product Details

Because of its characteristic, it provides a perfect atomizing of materials size, density, hardness and durability. Hence, the efficiency of abrasive reduces the consumption rate and increases the productivity as well as non-toxic environment status. PS Ball is an inexpensive material when we compared to other mineral materials. PS Ball can be recycled up to 3-4 times based on its surface toughness.
Being processed with SAT, ions dissociated in ion form can be as stable oxide compound in Spinel Structure. Spinel Structure with general chemical formula AB2O4 is octahedron shaped structure as illustration in which oxygen atom is almost filled with cube clise packed packing that is the structure with B atom surrounding 6 oxygen atoms in octahedron and with Atom surrounding 4 oxygen atoms.
There is Spinel as typical example in this Spinel Structure. Such as this crystal generally has solidity 5.5~8, luster like glass and high index of reflection.
Colorless and transparent one is very solid, weathering proof and corrosion proof to the extent that could be used as gem.
As the surface of this is formed with an oxide compound in Spinel Structure, ion or electron moving required in chemical reaction become difficult and therefore it forms stable compound and very strong resistance to chemical, physical cause as weathering. So, Spinel particles transformed from convert reactor slag with SAT doesn’t break out pollution problem.
PS Ball is the noble product of slag atomizing process. We named if Precious, since it is converted from valueless waste into new born material with good value added.
It is an environment-Friendly material with stable status of Spinet Structure by rapid air & mist cooling system, proven by authorities.
Application
PS Ball has excellent physical properties such as spherical shape, high strength and low abrasive rate. Using these characteristics, the excellent performance was proven in use of Repair and Reinforcing Material, Abrasive Blasting Material, Roof Material, Non-slip Material etc. Furthermore, PS Ball has been applied widely to the substitute for river sand after acquirement of “Construction Mark”.

Details

Application	Advantage	Size(mm)
Repair and Reinforcing Material	Save pastes (Cement, Polymer) with high strength and low absorption rate. Eases drying shrinkage with the spherical particles. Excellent self-compacting with high fluidity.	Below 5.0
Abrasive Blasting Material	Lower price than rival goods. Excellent hardness (Mohs hardness 7 or higher). Good in density of illumination. Reuse available (2~4 times). Less dust than Silica and Garnet. Waste after blasting can be classified as non-scheduled waste.	0.6~1.0 1.0~2.0
Roof Material	High class texture due to glossy surface. Excellent compressive strength, wear resistance, wind resistance, etc.	0.6~1.0
Weight Material	Effective in use of weight material due to high specific gravity. Excellent strength, less expensive.	Below 5.0
Manhole Repair Material	Improve Compressive Strength. Reduce the resin consumption. Road surface goes with the color of PS Ball (School Zone)	0.6~2.0
Non –Slip Material	Produce diverse products through coloring (School Zone) Less product unit cost with direct product process and construction. Longer product lifespan after construction due to excellent wear resistance.	2.0~5.0
Poly-Concrete Material	Save the volume of Polymer. Improve compressive strength.	Below 0.6
Road Pavement Material	Improve strength Cost saving effect	Below 5.0
Concrete Aggregate	No expansion by free CaO Improve Strength	Below 5.0
Heavy Aggregate	Radioactive Shielding effect. Selected aggregate by collection of balls with gravity 4.0 over	Below 5.0
Secondary Concrete Products	High Strength Cost saving effect	Below 5.0
Soft Ground Reinforcement Material	Excellent permeability. Eco friendly	Below 5.0

Company Details

Manufacturer of cut wire shot in carbon steel , stainless steel , aluminum , zinc & copper cut-wire shot is produced by cutting wire into lengths equal to the wire diameter. Quality is assured by control of the chemical and physical properties inherent in the wire and accurate sizing to length. Every piece is 100% solid. Cut-wire shot is available in an “as-cut” (cylindrical) form as well as in a normal conditioned and special conditioned (spherical) shape. Cut wire shot is available in sizes from 0.40mm to 2.00mm . Oday company is providing the largest range of cut wire shot in different sizes and metals , which suits the best for its customer requirements . Details of product are given as below : product list size grit size cast steel shot size cut wire shot (in inches) equivalent cut wire shot g-50 s-170 0.017 0.40 g-40 s-190 0.020 0.50 g-40 s-230 0.023 0.60 g-25 s-280 0.028 0.70 g-25 s-330 0.032 0.80 g-18 s-360 0.035 0.90 g-18 s-390 0.041 1.00 g-16 s-460 0.047 1.20 g-17 s-550 0.054 1.40 g-12 s-660 0.062 1.60 g-10 s-780 0.080 2.00 material mild steel type 1020 carbon steel type 1070 stainless steel type 302 / 304 /202 / 430 aluminum zinc 98.9% hardness range mild steel 20 hrc carbon steel 45 - 54 / 55 - 60 hrc stainless steel 302 / 304 / 202 / 430 32 hrc minimum shape description specification as cut (-u) cylindrical with sharp edge is 5873-1970 / sae j441 normal (-c) corner pre round is 5873-1970 / sae j441 conditioned (-3c) almost spherical is 5873-1970 / sae j441 packing provided : 25kgs. /bag application of cut wire shot blast cleaning blast cleaning of die-casting, foundry pieces, forgings, sand removal, steel board, steel material, h type steel structure. Rust removal rust removal of foundry pieces, forgings, steel board, steel material, steel structure, descaling of forging. Shot peening shot peening of heat treatment pieces, gear etc. Shot blasting shot blasting of profile steel, steel board, steel material, ship board. Shot polishing shot polishing of steel board, steel material, and profile steel. Grit removal grit removal pre-treatment pre-treatment of surface, steel structure, before-painting. Advantages of cut wire shot 1. Most economical and lowest consumption. 2. Available in various sizes as per requirement. 3. More life span, till completely reduced to smallest tiny particle. 4. Increases the fatigue life of the blasted components. 5. No possibility for dust formation during shot blasting. 6. Cleans the product faster. 7. Cuts down the maintenance cost of shot blasting machine. 8. No dust or health hazard during operation. Why cut wire shot:- raw material is of exact composition without any material defect (blow holes, porosity, shrinkage etc.), and wears out nominally during its use. No dust generation. Environment friendly. Consistent performance reduced time for shot blasting/peening. Consumption decreases 3-4 times less to cast shot (case to case basis). Lower inventory required for the same job. Lower operation cost. All shot being made out of same wire are identical, no variation of size anywhere. Uniform hardness throughout. Micro-structure is only tempered martensite. Due to drawing passes grain size is stabilized. Lower maintenance of machine due to absence of abrasive dust. Peening technology the shot peening media is the tool of shot peening . The better the shot peening media the better the result of shot peening * the shot peening media should be spherical. Broken and uneven particles may produce harmful effects. * the shot peening media should at least have the hardness of the part to be peened, otherwise the compressive residual stress will be significantly reduced. * the shot peening media should be conditioned to have only particle size to the established limits, otherwise the depth of compressive stress layer will be reduced. * the shot peening media should be dry, free from dust and clean, otherwise there will be a damping effect and the compressive residual stress will be reduced as well as the depth of compressive stress layer. Parts also could be unacceptably contaminated. “as-cut” (cylindrical) shot normal conditioned shot special conditioned (spherical) shot