PLUS 3 Data Logger

Get Latest Price

Fiberglass-epoxy terminal board, sealed gold plated pins, zinc plated screws and terminalsWeatherproof polycarbonate
0.1% of the value stored0.1% of the value stored
0.4% of the value stored4% of the value stored
Internal battery-backed with leap year correction, 2000 to 2099128MB NRG formatted SD Card, non-volatile FLASH
Supply TypeManufacturer, Exporter, Supplier, Retailer
Preferred Buyer Location All over the world

View More Details

Send Enquiry

Company Information

Ramkrishna Iron Works Pvt. Ltd.

Marine Drive, Mumbai, Maharashtra

View Number

Member Since 7 Years
Nature of Business Retailer

Ask for more detail from the seller

Contact Supplier

Report incorrect details

View Company Details

Product Details
Company Details

15 channel Internet-enabled micropower wind energy data loggerWind resource assessment Turbine power performance verification
1 second10 minute fixed
672 files0.1% of full scale (1024 counts)
0.4% of the value stored4% of the value stored
Internal battery-backed with leap year correction, 2000 to 2099128MB NRG formatted SD Card, non-volatile FLASH
Injection molded black ABSWhite elastomer dome keypad
Fiberglass-epoxy terminal board, sealed gold plated pins, zinc plated screws and terminalsWeatherproof polycarbonate
0.1% of the value stored0.1% of the value stored

Data Loggers

Data loggers are the core component of RNRG’s complete system approach to wind and solar measurement applications. Data are collected from readings of meteorological sensors and other devices and then stored in our loggers for either manual retrieval or automated delivery to the location of your choice.

SymphoniePLUS3 Data Logger

SymphoniePLUS3 is a proven 15-channel data logger tailored for wind resource assessment.

Engineered to work seamlessly with our towers and sensors, SymphoniePLUS3 reliably collects and safely stores data in all weather conditions.

The innovative design of SymphoniePLUS3 allows you to log time-stamped data from up to 15 sensors. Six counter (anemometer) channels and two analog wind direction channels are built-in, while three “flex” channels and the remaining four analog channels allow for numerous sensor configuration options depending on the requirements of your particular measurement campaign.

Data is sampled every second, averaged and time-stamped every 10 minutes, and stored on an SD Card, 128MB. A real-time display and keypad are built into the logger to facilitate site visits. Stored data from the SymphoniePLUS3 can be routinely delivered anywhere in the world using the Symphonie iPackGPS communications and power supply module.

Our next generation data logger, the SymphoniePRO® Data Logger, is available for renewable energy professionals requiring more advanced features and flexibility.

Note: A Symphonie iPackGPS provides the necessary 12V power source necessary for several RNRG sensors:

RH5X Relative Humidity Sensor
BP20 Barometric Pressure Sensor
Tipping Bucket Rain Gauge
RNRG 40H Anemometer

For sites where remote communication is not needed, use a Symphonie® iPack | Power Only.

Benifits Universal Anemometer Compatibility

Six counter channels:

Accommodate a range of anemometers, including:

WindSensor P2546-OPR Anemometer
Thies First Class Advanced Anemometer
RNRG Class 1 Anemometer
RNRG 40C Anemometer
The brand of your choice

Do not require SCM cards

Customizable Channels

Three “flex” channels:

Can be used as either analog or counter sensor inputs
Configure automatically based on the Symphonie® SCM Card installed
Allow for numerous sensor configuration options

Streamlined Data Collection

Advanced data logging:

Features one-second sampling (conforms to IEC 61400-12-1)
Averages data over a 10-minute period
Writes data to an SD card on an hourly basis
Includes Symphonie Data Retriever (SDR) software

Password Protected Access

Unauthorized user lockout prevents access to logger via the keypad.

Automated Data Transfer

SymphoniePLUS3 interfaces with your choice of Symphonie iPackGPS communications and power modules, which transfer data via third-party cellular or satellite services. When SymphoniePLUS3 is deployed with an iPackGPS, site visits to retrieve the SD card data become unnecessary; the data is automatically transferred through your assigned Internet Service Provider (ISP) via email. Additionally, SymphoniePLUS3 can be integrated into SCADA networks and deliver data over MODBUS protocol using the iPackACCESS communications module. All iPacks are designed to be "plug and play,” requiring only minimal hardware configuration. Browse iPack options on the Data Logger Accessories page.

Description
Instrument type	15 channel Internet-enabled micropower wind energy data logger
Applications	Wind resource assessment Turbine power performance verification
Sensor compatibility - counter channels	NRG Systems #40C anemometer or compatible NRG Systems Class 1 anemometer Opto anemometer Reed switch anemometer
Sensor compatibility - analog channels	NRG Systems #200P direction vane NRG Systems #110S temperature sensor Li-Cor #200SZ pyranometer NRG Systems #BP20 absolute pressure (requires optional iPack power) NRG Systems RH-5X relative humidity (requires optional iPack power)
Data Collection
Counter channels	Channels 1-3 and 13-15 are always counter inputs supporting: NRG Systems #40C anemometer or compatible NRG Systems Class 1 anemometer Opto anemometer Reed switch anemometer Maximum counter input frequency is 2500 Hz
Analog channels	Channels 7-12 are always analog inputs: Channels 7 and 8 dedicated for NRG Systems #200P direction vane Channels 9-12 use analog Signal Conditioning Modules (SCMs) to configure each channel for a particular sensor
Flex channels	Channels 4-6 are 'Flex' Channels Analog or Counter Accept Signal Conditioning Modules (SCMs) to configure the channel for a particular sensor type
Sampling interval	1 second
Averaging interval	10 minute fixed
Real time clock	Internal battery-backed with leap year correction, 2000 to 2099
Storage medium	128MB NRG formatted SD Card, non-volatile FLASH
Maximum data storage	672 files
File format	Windows compatible One (1) 14KB binary file per day Header includes site, serial number, and sensor information
Software	Symphonie Data Retriever (SDR) for Windows Scales raw data Creates measurement database for each site Creates basic reports Maintains site and sensor information Configures iPacks
Reader	Windows compatible SD Card reader
Parameters recorded for each channel	Each data interval is time-stamped Average Standard deviation Min* Max* * Min and Max not used for wind direction vanes
Data delivery	SD Card Internet email via GSM, CDMA, or Iridium Satellite with optional iPack
Resolution
Analog measurement resolution	0.1% of full scale (1024 counts)
Counter average stored resolution	0.1% of the value stored
Analog average stored resolution	0.1% of the value stored
Min / Max stored resolution	0.4% of the value stored
Standard deviation stored resolution	4% of the value stored
Configuration
User interface	Liquid Crystal Display (LCD) 4 x 20 characters 16 key pad (6 navigation keys plus numeric/phone pad) with audible feedback
Configurable parameters	Clock Time zone Site number Display scaling (defaults are provided for each channel based on the channel type)
iPack options	iPack configured via serial port connection to your PC Serial connection direct to iPack or through logger's iPack access port Symphonie Data Retriever for Windows integrates iPack settings
Connections
Sensor wiring	Sensors connected to field wiring panel Field wiring panel plugs into logger Ground stud connects to earth ground with included ground cable
Expansion slots	Three (3) SCM slots accept analog or counter SCMs Four (4) SCM slots accept only analog SCMs
Communication ports	Male DB25 interfaces to one optional iPack communications module iPack access port provides a connection to the iPack programming port without dismounting the iPack or logger
Power requirements
Batteries	Two (2) 1.5 Volt D-Cell Batteries (included) Nominal voltage: 1.5 Volts Minimum voltage: 0.9 Volts Battery life approximately one year, depending on configuration
External power input	Provided by any iPack
External solar input	Provided by any iPack
Other	Optional iPacks provide 12V power required by some sensors. PV/Battery only iPack provides power to sensors and logger for stand alone configurations.
Installation
Mounting	Mounts with 4 bolts (included) to keyed slots inside of metal shelter box Shelter box attaches to tower with hose clamps
Tools required	Screwdriver for input terminals (included) 8 mm (5/16 inch) wrench or nut driver for logger mounting screws and logger ground nuts
Environmental
Operating temperature range	-40 °C to 65 °C (-40 °F to 149 °F) Note: display readable -30 °C to 55 °C (-22 °F to 130 °F)
Operating humidity range	0 to 100% RH non-condensing
Physical
Weight	1.3 kg (2.6 pounds), including batteries
Dimensions	(Including Field Wiring Panel) 22.2 cm height, 18.8 cm width, 7.7 cm depth (8.7 x 7.4 x 3.0 in.)
Materials
Faceplate	Injection molded black ABS
Buttons	White elastomer dome keypad
Wiring panel	Fiberglass-epoxy terminal board, sealed gold plated pins, zinc plated screws and terminals
Enclosure	Weatherproof polycarbonate