We offer Poly Shine Stone Coatings to the clients. Poly Shine Stone Coating is a special polyester resin based coat which fills the stone porosity and enhances gloss & color of the stones. Our Poly Shine Stone Coatings are water proof and have high opacity and elasticity. Moreover, these Poly Shine Stone Coatings are anti-bacterial, stain resistant and heat proof.  
Features

• 100% water proof
• High coverage
• High elasticity
• High reflectivity
• High  opacity
• Anti-bacterial
• Stain resistant
• Heat proof
• Wash able

Areas of Applications

• Sand stones
• Fossil-stones
• Granites
• Cement/ Concrete tiles
• Terrazzo stone
• Mosaic stone

How to Use

• Grind the stone up to 220 mesh level.
• Dry the stone completely.
• Clean the surface of the stone with dry cloth so that every loose/dust particle is removed.
• Take coat/resin in a plastic bowl, add A-1 (blue liquid) maximum 2% (depending on the climatic condition) of the coat and mix thoroughly then add C-2 (white liquid) max 2% of coat again mix well.
• Pour the mixed coat on the stone slab and apply quickly with the help of iron blade (Funner patti).
• Important point to remember is that the coat should be used within 3-5 minutes after mixing all the components to avoid pre-gelling and wastage.
• Let the coat cure for 8-12 hrs.
• Remove the excess coating by grinding with 320 no. (Resin bond abrasive) and ensure that the coat is removed. (Do not grind excessively to avoid removal of coat from pores.)

Precaution : Don't Put A-1 & C-2 at the same time to avoid fire accident.

We offer Poly Shine Stone Coatings to the clients. Poly Shine Stone Coating is a special polyester resin based coat which fills the stone porosity and enhances gloss & color of the stones. Our Poly Shine Stone Coatings are water proof and have high opacity and elasticity. Moreover, these Poly Shine Stone Coatings are anti-bacterial, stain resistant and heat proof.  
Features

• 100% water proof
• High coverage
• High elasticity
• High reflectivity
• High  opacity
• Anti-bacterial
• Stain resistant
• Heat proof
• Wash able

Areas of Applications

• Sand stones
• Fossil-stones
• Granites
• Cement/ Concrete tiles
• Terrazzo stone
• Mosaic stone

How to Use

• Grind the stone up to 220 mesh level.
• Dry the stone completely.
• Clean the surface of the stone with dry cloth so that every loose/dust particle is removed.
• Take coat/resin in a plastic bowl, add A-1 (blue liquid) maximum 2% (depending on the climatic condition) of the coat and mix thoroughly then add C-2 (white liquid) max 2% of coat again mix well.
• Pour the mixed coat on the stone slab and apply quickly with the help of iron blade (Funner patti).
• Important point to remember is that the coat should be used within 3-5 minutes after mixing all the components to avoid pre-gelling and wastage.
• Let the coat cure for 8-12 hrs.
• Remove the excess coating by grinding with 320 no. (Resin bond abrasive) and ensure that the coat is removed. (Do not grind excessively to avoid removal of coat from pores.)

Precaution : Don't Put A-1 & C-2 at the same time to avoid fire accident.