Products / Services
  • Products / Services
  • Companies
  • Buy Leads
Post Buy Requirement

Radiant Tube Heaters

Listing ID #4062078

  • Supply Type Manufacturer, Exporter, Supplier
Preferred Buyer From : All over the world

he installation of the Radiant Modules consists of a patented heat generator, a single or double-pipe radiant circuit and a thermoregulation digital device. The radiant circuit is a closed ring....
View More Details
Send Enquiry

Company Information

  • Member Since 6 Years
  • Nature of Business Retailer

Ask for more detail from the seller

Contact Supplier

Product Details no_img_icon

he installation of the Radiant Modules consists of a patented heat generator, a single or double-pipe radiant circuit and a thermoregulation digital device.
The radiant circuit is a closed ring having go and return tubes working in vacuum condition. The gas or gas-oil burner produces a carrying fluid (a mixture of air and burned gases) which circulates at high speed inside the tubes of the radiant circuit. The tubes reach a superficial temperature from 100°C to 300°C (according to the requirements) producing the radiant energy necessary to provide the required environmental comfort.
The pipes are in aluminized steel, treated with special silicone paint and insulated with fiberglass panels on three sides. The radiant circuits are pre-assembled and tested in our factory; their installation on site turns out to be very easy also thanks to their flanged joints.
 
KEY BENEFITS
 
COMBUSTION EFFICIENCY up to 95% or 107% in models equipped with condensing unit*.
ECOMIX BURNER air-stream gas burner with VENTURI tubes working in constant proportional modulation.
ECOSAVING DEVICE that controls the chimney lock-gate and allows to keep optimal combustion efficiency at any power level**.
PRE-ASSEMBLED MODULES They are produced and assembled in our factory to make the installation job easier and quicker***.
THERMAL POWER up to 300kW and circuit lenght up to 160m.
DIGITAL THERMAL CONTROL allows you to operate the system from remote stations and get remote assistance service (optional).
MINIMUM MAINTENANCE through the reliability of all components and exacting tests complying with European standards both in the assembly line and in the in-house laboratory. All this ensures high reliability and long-term safety.
OTHER ADVANTAGES
 
NO AIR STRATIFICATION or rather no warm air shall accumulate in the high areas of the room being heated; on the contrary, as far as the air goes upwards, the air temperature itself decreases.
EXCELLENT THERMAL EMISSION generated by the large radiating surface with high emissivity.
HEALTHIER AND CLEANER AIR There are no convective motions and consequent raise of dust, keeping the air healthy and clean.
COMFORT TO CURRENT STANDARDS Our long experience stretching back over thirty years of activity, added to our participation in work groups specifying standards for products, make Fraccaro an ideal partner in this specific sector of heating technology.
EASY, RAPID INSTALLATION thanks to an easy assembling procedure and installation on the ceiling with chains.
NO FLOOR OR WALL SPACE IS REQUIRED as our GIRAD Radiant modules are installed on the ceiling.
NO DANGER OF FROST as the lack of carrying fluids, such as hot water or steam, makes it possible to shut down the system for long periods without any unfortunate consequences.
UNIFORMITY OF TEMPERATURE the heat produced through radiation by our Radiant Modules creates uniform temperature horizontally through the building, better than with any type of traditional heating.
HIGHLY ECOLOGICAL as it allows for fuel saving, with great combustion performance and very low emissions of pollutants.
MODULAR DESIGN i.e. for large surfaces more than one units are to be installed.
MODULATING OPERATION of generators, so as to control the radiating heat emission according to the external temperature.
NO AIR STRATIFICATION or rather no warm air shall accumulate in the high areas of the room being heated; on the contrary, as far as the air goes upwards, the air temperature itself decreases.
RAPID WARM-UP due to lack of intermediate fluids requiring heating.
CONFORM TO CURRENT STANDARDS Our long experience stretching back over thirty years of activity, added to our participation in work groups specifying standards for products, make Fraccaro an ideal partner in this specific sector of heating technology.
 
PRE-ASSEMBLED MODULES
The radiant module is realized with a supporting frame in zinc-coated steel. The frame supports one or two pipes in aluminized steel treated with silicone paint and having insulating fiberglass panels on three sides. The pre-assembled modules in 1.5, 3 and 6-meter length allow a very flexible application of the circuits whose length and shape can vary according to the requirements of the building to be heated.
They are produced and pre-assembled in our factory to make the installation job easier and quicker. Thanks to the special chain connection to the supporting frame, the pipes are free to move while heating or cooling assuring a very long lasting to our modules.
 
MODULE CONNECTION
 
The flanged cone-shape joints ensure perfect pipe tightness; during the installation they avoid problems coming from the traditional connections with silicone, gaskets or other adhesive components.
The bayonet joint of the radiant modules ensure the perfect tightness of the radiant circuit.

 


Company Details close-icon

Incorporated in 1984, with over 30 years of experience, today STG Heating Pvt. Ltd. , formerly known as Vinosha Services, is one of India’s premier companies in heating systems and technologies. Our core competency lies in providing energy efficient solutions to our customers. Our solutions prove to be not only economical but are also environment friendly, thereby reducing our customers’ carbon footprint. With our customers being consistently satisfied with our products and services, we have managed to create a vast and an ever increasing customer base.
1. Hot water boilers - European make with PED certification; efficiency from 92% up to 109% including condensing technology; shell and tube smoke tube boilers
2. Solar thermal packages - TINOX coated aluminium absorbers with electro-statically welded copper risers on automated machines having TUV Rhineland certification; minimum 150 lpd peak; provided in the Indian sub-continent
3. Heat pumps and chillers - Air and water sourced, EUROVENT certified; having COPs of 3.5+ on air source and COP+EER of 5.5+
4. Earthing and lightning protection - complies to current code IS:IEC:62305 (released in 2015), all components manufactured as per IS:IEC:62561; dedicated software to evaluate risk available
5. Steam boilers and thermic fluid heaters - high efficiency NON-IBR boilers and thermic fluid heaters manufactured in-house with complete modular construction, skid mounted
6. Commercial water heaters - domestic and commercial hot water heaters; 4 & 5 star efficiency; state-of- the-art controls; manufactured in USA/ Europe, and are the primary choice of contractors in USA, Canada and Europe
7. EPC Contracts - Turnkey, solar, steam and hot water packages for hotel and hospital segments, commercial buildings, industries, including storage tanks, heat exchangers control panels BMS connectivity, pumps, piping insulation, valves among others
8. Glass lined tanks - vitrified steel tanks, glass lined, up to 5000 litres; baked at 860°C in an autoclave suitable for potable drinking water, manufactured in a world class European facility
Today we have 3 branch offices and about 15 service centers located all over the country to promptly cater to our customer’s needs in relation to any of our installed products. We also have considerable presence in Nepal, Bangladesh, Sri Lanka, UAE, Qatar, Saudi Arabia and Oman. Backed by our large global network, we are confident to live upto your expectations and ensure prompt response. Ex-stock availability of spares, over 45 factory trained personnel, and a strong understanding of applications help us in offering you quality service. In order to optimize the output of the equipments our customers purchase, they can avail of our free training programmes at our headquarters in Mumbai.
  • Nature of Business Manufacturer / Exporter / Supplier / Retailer
Tell us your Buy Requirement to Get Instant Response
Tell us what you need?

Looking for Radiant Tube Heaters?

Quantity
Seller Contact Details
  • Seller STG Heating Pvt. Ltd.
  • Address Sewri, Mumbai, Maharashtra
Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice
Radiant Tube Heaters at Best Price in Mumbai - ID: 4062078 | STG Heating Pvt. Ltd.
Products / Services
  • Products / Services
  • Companies
  • Buy Leads
Post Buy Requirement

Radiant Tube Heaters

Listing ID #4062078

  • Supply Type Manufacturer, Exporter, Supplier
Preferred Buyer From : All over the world

he installation of the Radiant Modules consists of a patented heat generator, a single or double-pipe radiant circuit and a thermoregulation digital device. The radiant circuit is a closed ring....
View More Details
Send Enquiry

Company Information

  • Member Since 6 Years
  • Nature of Business Retailer

Ask for more detail from the seller

Contact Supplier

Product Details no_img_icon

he installation of the Radiant Modules consists of a patented heat generator, a single or double-pipe radiant circuit and a thermoregulation digital device.
The radiant circuit is a closed ring having go and return tubes working in vacuum condition. The gas or gas-oil burner produces a carrying fluid (a mixture of air and burned gases) which circulates at high speed inside the tubes of the radiant circuit. The tubes reach a superficial temperature from 100°C to 300°C (according to the requirements) producing the radiant energy necessary to provide the required environmental comfort.
The pipes are in aluminized steel, treated with special silicone paint and insulated with fiberglass panels on three sides. The radiant circuits are pre-assembled and tested in our factory; their installation on site turns out to be very easy also thanks to their flanged joints.
 
KEY BENEFITS
 
COMBUSTION EFFICIENCY up to 95% or 107% in models equipped with condensing unit*.
ECOMIX BURNER air-stream gas burner with VENTURI tubes working in constant proportional modulation.
ECOSAVING DEVICE that controls the chimney lock-gate and allows to keep optimal combustion efficiency at any power level**.
PRE-ASSEMBLED MODULES They are produced and assembled in our factory to make the installation job easier and quicker***.
THERMAL POWER up to 300kW and circuit lenght up to 160m.
DIGITAL THERMAL CONTROL allows you to operate the system from remote stations and get remote assistance service (optional).
MINIMUM MAINTENANCE through the reliability of all components and exacting tests complying with European standards both in the assembly line and in the in-house laboratory. All this ensures high reliability and long-term safety.
OTHER ADVANTAGES
 
NO AIR STRATIFICATION or rather no warm air shall accumulate in the high areas of the room being heated; on the contrary, as far as the air goes upwards, the air temperature itself decreases.
EXCELLENT THERMAL EMISSION generated by the large radiating surface with high emissivity.
HEALTHIER AND CLEANER AIR There are no convective motions and consequent raise of dust, keeping the air healthy and clean.
COMFORT TO CURRENT STANDARDS Our long experience stretching back over thirty years of activity, added to our participation in work groups specifying standards for products, make Fraccaro an ideal partner in this specific sector of heating technology.
EASY, RAPID INSTALLATION thanks to an easy assembling procedure and installation on the ceiling with chains.
NO FLOOR OR WALL SPACE IS REQUIRED as our GIRAD Radiant modules are installed on the ceiling.
NO DANGER OF FROST as the lack of carrying fluids, such as hot water or steam, makes it possible to shut down the system for long periods without any unfortunate consequences.
UNIFORMITY OF TEMPERATURE the heat produced through radiation by our Radiant Modules creates uniform temperature horizontally through the building, better than with any type of traditional heating.
HIGHLY ECOLOGICAL as it allows for fuel saving, with great combustion performance and very low emissions of pollutants.
MODULAR DESIGN i.e. for large surfaces more than one units are to be installed.
MODULATING OPERATION of generators, so as to control the radiating heat emission according to the external temperature.
NO AIR STRATIFICATION or rather no warm air shall accumulate in the high areas of the room being heated; on the contrary, as far as the air goes upwards, the air temperature itself decreases.
RAPID WARM-UP due to lack of intermediate fluids requiring heating.
CONFORM TO CURRENT STANDARDS Our long experience stretching back over thirty years of activity, added to our participation in work groups specifying standards for products, make Fraccaro an ideal partner in this specific sector of heating technology.
 
PRE-ASSEMBLED MODULES
The radiant module is realized with a supporting frame in zinc-coated steel. The frame supports one or two pipes in aluminized steel treated with silicone paint and having insulating fiberglass panels on three sides. The pre-assembled modules in 1.5, 3 and 6-meter length allow a very flexible application of the circuits whose length and shape can vary according to the requirements of the building to be heated.
They are produced and pre-assembled in our factory to make the installation job easier and quicker. Thanks to the special chain connection to the supporting frame, the pipes are free to move while heating or cooling assuring a very long lasting to our modules.
 
MODULE CONNECTION
 
The flanged cone-shape joints ensure perfect pipe tightness; during the installation they avoid problems coming from the traditional connections with silicone, gaskets or other adhesive components.
The bayonet joint of the radiant modules ensure the perfect tightness of the radiant circuit.

 


Company Details close-icon

Incorporated in 1984, with over 30 years of experience, today STG Heating Pvt. Ltd. , formerly known as Vinosha Services, is one of India’s premier companies in heating systems and technologies. Our core competency lies in providing energy efficient solutions to our customers. Our solutions prove to be not only economical but are also environment friendly, thereby reducing our customers’ carbon footprint. With our customers being consistently satisfied with our products and services, we have managed to create a vast and an ever increasing customer base.
1. Hot water boilers - European make with PED certification; efficiency from 92% up to 109% including condensing technology; shell and tube smoke tube boilers
2. Solar thermal packages - TINOX coated aluminium absorbers with electro-statically welded copper risers on automated machines having TUV Rhineland certification; minimum 150 lpd peak; provided in the Indian sub-continent
3. Heat pumps and chillers - Air and water sourced, EUROVENT certified; having COPs of 3.5+ on air source and COP+EER of 5.5+
4. Earthing and lightning protection - complies to current code IS:IEC:62305 (released in 2015), all components manufactured as per IS:IEC:62561; dedicated software to evaluate risk available
5. Steam boilers and thermic fluid heaters - high efficiency NON-IBR boilers and thermic fluid heaters manufactured in-house with complete modular construction, skid mounted
6. Commercial water heaters - domestic and commercial hot water heaters; 4 & 5 star efficiency; state-of- the-art controls; manufactured in USA/ Europe, and are the primary choice of contractors in USA, Canada and Europe
7. EPC Contracts - Turnkey, solar, steam and hot water packages for hotel and hospital segments, commercial buildings, industries, including storage tanks, heat exchangers control panels BMS connectivity, pumps, piping insulation, valves among others
8. Glass lined tanks - vitrified steel tanks, glass lined, up to 5000 litres; baked at 860°C in an autoclave suitable for potable drinking water, manufactured in a world class European facility
Today we have 3 branch offices and about 15 service centers located all over the country to promptly cater to our customer’s needs in relation to any of our installed products. We also have considerable presence in Nepal, Bangladesh, Sri Lanka, UAE, Qatar, Saudi Arabia and Oman. Backed by our large global network, we are confident to live upto your expectations and ensure prompt response. Ex-stock availability of spares, over 45 factory trained personnel, and a strong understanding of applications help us in offering you quality service. In order to optimize the output of the equipments our customers purchase, they can avail of our free training programmes at our headquarters in Mumbai.
  • Nature of Business Manufacturer / Exporter / Supplier / Retailer
Tell us your Buy Requirement to Get Instant Response
Tell us what you need?

Looking for Radiant Tube Heaters?

Quantity
Seller Contact Details
  • Seller STG Heating Pvt. Ltd.
  • Address Sewri, Mumbai, Maharashtra
Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice