Listing ID #1273918
Company Information
Ask for more detail from the seller
Contact SupplierSBR Rubber Sheets are made from Styrene Butadiene and are often produced by blending with natural rubber. It has excellent mechanial properties, low compression set and high resilience. It is very economical and it can be compounded to provide fine abrasion, wear and tensile quality.
It is available in a wide range of hardness from 30° to 90° Shore A and working temperature range -30°C to +100°C. They have good resistance to acids, alkali and salts but are not recommended for use in areas where it could come in contact with oils and hydrocarbon. It is more resistant to ageing and temperature than Natual Rubber Sheet.
Applications :
SBR Rubber Sheets - Commercial & Standard Grade | |||||||
---|---|---|---|---|---|---|---|
Product Code | Specific Gravity (gm/cm3) | Hardness (+/- 5° Shore A) |
Tensile Strength (min. Kg/cm2) |
Elongation at Break (min. %) | Abrasion(Max. mm3) | Compression Set at 70°C for 22hrs (%) | Temp. Range (°C) |
SBR 16070C | 1.6 | 70 | 15 | 150 | ---- | ---- | -10 to +70 |
SBR 16060C | 1.6 | 60 | 20 | 175 | ---- | ---- | -10 to +70 |
SBR 14570S | 1.45 | 70 | 40 | 200 | 450 | 55 | -30 to +70 |
SBR 14565S | 1.45 | 65 | 50 | 250 | 450 | 55 | -30 to +70 |
SBR 14555S | 1.45 | 55 | 50 | 275 | 400 | 55 | -30 to +70 |
SBR 14545S | 1.45 | 45 | 70 | 300 | 350 | 55 | -30 to +70 |
SBR Rubber Sheets - Pure/Special & Custom Grade | |||||||
---|---|---|---|---|---|---|---|
Product Code | Specific Gravity (gm/cm3) | Hardness (+/- 5° Shore A) |
Tensile Strength (min. Kg/cm2) |
Elongation at Break (min. %) | Abrasion (Max. mm3) | Compression Set at 70°C for 22hrs (%) | Temp. Range (°C) |
SBR 12070P | 1.2 | 70 | 160 | 350 | 200 | 35 | -30 to +100 |
SBR 12065P | 1.2 | 65 | 150 | 500 | 200 | 35 | -30 to +100 |
SBR 12055P | 1.2 | 55 | 150 | 550 | 175 | 35 | -30 to +100 |
SBR 11045P | 1.1 | 45 | 150 | 600 | 150 | 35 | -30 to +100 |
SBR 11040P | 1.1 | 40 | 150 | 650 | 150 | 35 | -30 to +100 |
SBR CD(Custom) | 1.10 to 2.00 | 30 to 90 | 15 to 200 | 150 to 650 | 100 to 500 | 30 to 55 | -30 to +100 |
Standard Sizes |
1) 1.2mm Wide x 10.0 Mtr. Long 2) 1.0 Mtr. Wide x 2.0 Mtr. Long |
---|---|
Custom Size | Max. width upto 2400mm, length upto 20M and thickness from 1mm to 100mm available on request (Press Finish) |
Standard Colour | Black (Red, Blue Off-white & other colours available on request subject to availability.) |
Surface Finish | 1) SS - Both Side Smooth (Standard) 2) SF - One Side Smooth / Other Side Fabric Finish 3) FF - both Side Fabric Finish |
Manufacturing Tolerance | ±10% on thickness, ±5% on length, ±2% on width. |
Note | Sheets can be supplied with fabric insertion in cotton, nylon, polyester, glass fibre etc. |
---|
Minimum OrderingInformation Required | • Dimension (Length x Width x Thickness) • Application/End Use • Working Temperature in °C • Tensile Strength & Elongation at Break • Hardness • Specific Gravity • Abrasion Resistance • Colour • Surface Finish • Total Quantity Required |
---|
The data on this page represent typical values. Since application variables are a major factor in product performance,this information should serve only as a guideline. We assume no obligation or liability for use of this information. Unless we agree otherwise inwriting, we make no warranties, express or implied, and disclaim all implied warranties. We shall not be liable for any special, incidental or consequential damages. We reserve the right to change product design and properties without notice.