Listing ID #5370295
Company Information
Ask for more detail from the seller
Contact Suppliersubmersible level transmitter (series pblt2 & pbltx)
series pblt2 & pbltx submersible level transmitter
perfect for sludge and slurries, lightning protected, intrinsically safe
pblt2 and pbltx submersible level transmitters are manufactured for years of trouble free service in the harshest applications. Both measure the height of liquid above the position in the tank referenced to atmospheric pressure. The transmitter consists of a piezoresistive sensing element, encased in a 316 ss housing. Perfect for wastewater and slurry applications with features to protect the unit from these demanding applications. Large diameter 316 ss diaphragm seal is non-clogging and damage resistant to floating solids.the pblt2 incorporates lightning and surge protection utilizing dual arrestor technology, grounded to case, eliminating both power supply surges and lightning ground strike transients (surge protection is not guaranteed and is not covered by warranty). The pbltx is ul approved intrinsically safe for use in hazardous locations when used with proper barrier.units come equipped with a 270-pound tensile strength shielded and vented cable. Ventilation tube in the cable automatically compensates for changes in atmospheric pressure above the tank. The vent is protected with a maintenance free filter eliminating particulate or water droplets from entering the transducer.
product applications
wastewater,sludge pits, clarifiers, digesters,alum tanks,chemical storage tanks,oil tankslime slurry
sumps,reservoirs,specifications,service:compatible liquids.wetted materials:body: 316 ss, 316l ss; cable: polyether polyurethane or etfe; seals: fluoroelastomer.
accuracy:±0.25% fs (includes linearity, hysteresis, and repeatability).
temperature limit:pblt2: 0 to 200°f (-18 to 93°c); pbltx: etfe -4 to 176°f (-20 to 80°c); polyurethane: -4 to 149°f (-20 to 65°c),compensated temperature range:pblt2: 0 to 180°f (-18 to 82°c), pbltx: 0 to 176°f (-18 to 80°c).thermal effect:±0.02% fs/°f.pressure limit:2x fs.
power requirement:pblt2: 13 to 30 vdc, pbltx: 10 to 28 vdc.output signal:4 to 20 ma dc, two wire.
response time:50 msec.
loop resistance:900 ω.
electrical connection:wire pigtail.
mounting orientation:suspended in tank below level being measured.
electrical protection:pblt2: lightning and surge protection, pbltx: none.
weight:4.3 lb (2.0 kg).
agency approvals:pblt2: ce, pbltx: ce, culus intrinsically safe for class i, div. 1, groups a, b, c, d; class ii, div. 1, groups e, f, g; class iii, div. 1. (according to control drawing 001833-44)**
up to 196 ft (59.5 m) for etfe cable; up to 333 ft (101.5 m) for polyurethane cable.
features
durable cage design with large diameter 316 ss diaphragm seal that is non-clogging and damage resistant to floating solids,incorporates lightning and surge protection utilizing dual arrestor technology, grounded to case, eliminating both power supply surges and lightning ground strike transients (surge protection is not guaranteed and is not covered by warranty) on pblt2 models,maintenance free filter eliminates particulate or water droplets from entering the transducer,ul approved intrinsically safe on pbltx models for use in hazardous locations when used with the proper barrier,270 lb (122.5 kg) tensile strength shielded and vented cable,excellent chemical compatibility,npt connection allows the unit to be rigidly installed in a pipe/conduit, or the addition of a a-625 hanging loop for attaching a chain for pulling out of the installation
accuracy : and repeatability).usage : compatible liquids.type : submersible level transmitter
material : 316l ss; cable: polyether polyurethane or etfe; seals: fluoroelastomer.
condition : new,color : grey,process pressure : 2x fs.