Listing ID #3905520
Company Information
Ask for more detail from the seller
Contact SupplierThis unique blow moulding machine can be used to manufacture 20 liter jars at the rate of 80 jars per hour. It is well-equipped with a mould compensation system and a unique mechanical lock. The auto-controlled air ventilation in the heating chamber enables successful heat penetration while minimizing the heat in the heating chamber.
Description | Unit | 20 litre - SP-25000 H |
---|---|---|
Machine Specifications | ||
No. of Cavity | No | 1 |
Mould Clamp | Type | Hydraulic |
Stretching Type | Type | Pneumatic |
Production Per Hour | BPH | 60 |
Nominal Bottle Volume | Litre | 20 |
Max Bottle Dia | mm | 350 |
Max Neck Dia | mm | 120 |
Max Bottle Height | mm | 500 |
Air Requirement | ||
H.P. Air CFM (Calculated at 20 litre @ 30 Bar) | CFM | 20 |
L.P. Air CFM @ 8 bar (without Air Recovery) | CFM | 5 |
L.P. Air (CFM after Air Recovery) | CFM | NIL |
Electrical Requirement | ||
Connected Load Without Utility | kW | 22 |
Nominal Power Consumption | kW | |
Cooling Tower | ||
Cooling Tower (for Blowing Machine) | TR | Not required |
Water Circulating Pump With DOL Starter (for Blowing Machine) | kW | Not required |
Cooling Tower (for Compressor) (20 TR @ 100 CFM) | TR | 10 |
Water Circulating Pump With DOL Starter (for Compressor) (3 HP @ 100 CFM) | kW | 1.5 |
Cooling Tower Total Capacity | 10 | |
Mould & Neck Cooling | ||
Chiller-1 | TR | 3 |