Listing ID #3896442
Company Information
Ask for more detail from the seller
Contact SupplierTensile test is a measurement of ability of material to withstand forces that tends to pull it apart and to determine to what extent the materials stretches before breaking
Â
Tensile is the universal test applied to many polymers to check the mechanical properties and it is the most improtant property as majority of end use application involved some degree of mechanical loading & properties like Tensile Modulus, Elongation, Compression etc. are calculated using this machine.
Â
Â
MODEL NO. |
SUTM-I |
SUTM-I |
SUTM-I |
SUTM-I |
SUTMPPS-I |
SUTMPPS-I |
SDTLT-I |
STLT-I |
MODEL NAME |
Digital Single Screw |
Computerised Single |
Digital Twin Screw |
Computerised Twin |
Digital |
Computerised UTM With |
Digital Top Load Tester |
Computerised Top Load |
CAPACITY |
UP TO |
UP TO |
UP TO |
UP TO |
UP TO |
UP TO |
UP TO 0-150KG |
UP TO |
THE UTM CAN BE DESIGNED & SUPPLIED ACCORDING TO INDIVIDUAL LOAD RQUIREMENT |
||||||||
EXTENSION |
0-1000 MM OR AS PER REQUIREMENT |
|||||||
ATTACHMENT |
Compression/flExural/COF/ICOF/Peel/Bond/Tear/Shear/Puncture/Burst can be provided in all above models as per individual requirement |
|||||||
LOAD INPUT |
Maximum 2 Load Cell facility can be provided |
|||||||
SPEED |
1 TO 500 MM / MIN (AS PER STANDARD REQUIREMENT) |
|||||||
RESOLUTION |
00000 KG/000.00/0000.01 OR 0000KG / 000.0 KG / 00.00 KG |
|||||||
EXTENSION |
000.0 MM /000.00MM |
|||||||
EXTENSIO METER |
Contact Type as per requirment |
|||||||
A.C. DRIVE |
Suitable for UTM Capacity |
|||||||
POWER SUPPLY |
230 V AC, 50 HZ, SINGLE PHASE |
440 V AC, 50 HZ, THREE PHASE |
||||||
PAINT |
POWDER COATING & HARD CHROME PLATING |
|||||||
MODEL |
FLOOR STATNDING / TABLE TOP (AS PER CAPACITY OF MACHINE) |
|||||||
PRECAUTION/ |
ELECTRICAL EMERGENCY SWITCH, ELECTRO MECHANICAL LIMIT SWITCH, ELCTRONIC THROUGH MICRO CONTROLLER PARAMETERS |
|||||||
SOFT WARE |
RS 232 interface with WINDOW based software to conduct test and keep record of data with graph for the test calculated results of Yeild Load,Yeild Extension, Break Load, Break Extension, and Modulus of Elasticity, Maximum Load, Maximum extension, and Tensile Strength. |
|||||||
|