ge from 3 trays to 96 trays

Used for drying of high grade temperature and oxygen sensitive products. Highly suitable for drying hygroscopic substances which are dried to very low residual moisture content levels. Frequently vacuum drying cabinets are the sole possibility for drying lumpy, glutinous products or products of low pomposity. We are manufacturer, supplier and exporter of vacuum tray dryer as per ISI guidelines and user’s requirements since 1990 from Mumbai to India and all over the globe.

Vacuum tray dryer is the most commonly used batch dryer. They are either box – shaped or cylindrical shaped loaded and unloaded via a door. Inside are several heating plates mounted one above the other on which the product is placed in trays .The Top of both heating plates (Shelves) and the bottom of heating shelves trays should be as smooth as possible to permit optimal heat transfer between plates and product. The medium flowing through the heating plates is water, steam, or thermal oil. The distance between the heating plates is determined primarily by the surface loading and the foaming of the product. To avoid retrograde condensation, the cabinet walls are indirectly preheated by limpet coil provided on the outer side of the body (Optional). Only after all the product trays reach the same temperature, the cabinet is evacuated and drying can start. (The preheating phase is very important in order that the drying curve and the foaming of product are identical throughout the cabinet). During the main drying phase the vacuum is in the range of 40 to 80 mbar abs and in the final drying phase vacuum of only few mbar abs are reached. The vacuum can be controlled through PLC in order to reduce the drying cycle. Nitrogen can also be purged in the VTD according to the product.

ge from 3 trays to 96 trays

Used for drying of high grade temperature and oxygen sensitive products. Highly suitable for drying hygroscopic substances which are dried to very low residual moisture content levels. Frequently vacuum drying cabinets are the sole possibility for drying lumpy, glutinous products or products of low pomposity. We are manufacturer, supplier and exporter of vacuum tray dryer as per ISI guidelines and user’s requirements since 1990 from Mumbai to India and all over the globe.

Vacuum tray dryer is the most commonly used batch dryer. They are either box – shaped or cylindrical shaped loaded and unloaded via a door. Inside are several heating plates mounted one above the other on which the product is placed in trays .The Top of both heating plates (Shelves) and the bottom of heating shelves trays should be as smooth as possible to permit optimal heat transfer between plates and product. The medium flowing through the heating plates is water, steam, or thermal oil. The distance between the heating plates is determined primarily by the surface loading and the foaming of the product. To avoid retrograde condensation, the cabinet walls are indirectly preheated by limpet coil provided on the outer side of the body (Optional). Only after all the product trays reach the same temperature, the cabinet is evacuated and drying can start. (The preheating phase is very important in order that the drying curve and the foaming of product are identical throughout the cabinet). During the main drying phase the vacuum is in the range of 40 to 80 mbar abs and in the final drying phase vacuum of only few mbar abs are reached. The vacuum can be controlled through PLC in order to reduce the drying cycle. Nitrogen can also be purged in the VTD according to the product.