Vertical Blinds

Listing ID #1351061

A custom made vertical window blind is often used to decorate the windows of offices but as well for home decor. These window blinds come as standard with headrail in white, stacking on right or left hand size and top fix brackets.
Replace your curtains and give your space a fresh new look with the help of the line of window Vertical Blinds we offer you. They are the perfect combination between functionality and design as they come with great patterns and colours making it easier for you to integrate them into your home. You can have them custom made and decide on the way they are stacked.
Specifications
The following brief specifications for key items of componentry are intended for use by architects and designers. They are written in a style suitable for direct incorporation into design specifications.
Providing and fixing Sunflex Vertical Blinds manufactured by Opus inc. Collections, to the following specifications :

• The HEAD CHANNEL shall measure 40mm wide and 25mm deep with a nominal wall thickness of 1.2mm to 1.4mm extruded from patented 6063- T5 alloy finished in clear anodisation to a thickness of 20 microns.
• The SPLINE SHAFT shall be a tri-lobular patented aluminum extrusion of 6063-T5 alloy.
• The SLAT TRAVELLERS assembly shall be molded in a imported high engineering grade plastic & shall incorporate a gear clutch designed to prevent damage to the assembly. Slat hooks shall be removable to allow replacement where required without dismantling the tracking system.
• The SLAT SPACER LINKS shall be imported Stainless Steel and shall couple the slat travelers together in a predetermined spaced relationship and to allow uniform overlap (minimum 12mm) between slats across the width of the shade.
• The TILT CONTROL shall be by means of imported braided nylon cord with 3.8mm diameter engineering grade plastic, balls molded co-axially to it on 9.0mm c-t-c distance, by pulling on the ball chain connected to a pulley.
• The SLAT CARRIERS shall be of molded nylon and shall be suitable for snap insertion into the hook of the traveler assembly.
• The BOTTOM LINKAGE CHAIN shall couple adjacent slats at the base to minimize differential movement of slats.
• The CHANNEL MOUNTING BRACKETS shall be press formed angle brackets and provided with holes for fixing screws and nut attachment of the channel mounting clips. Finish shall be clear Zinc plated.
• The TRAVERSING CORD shall be 2.0mm diameter and constructed with a braided polyester jacket over a polyester core. The cord shall be held in tension by a cord weight.
• The FABRIC SLATS shall be slit in 100mm widths & provided with bottom pockets for housing bottom weights which are coupled together by means of endless bead chains pivotally attached by clasps to each side of each weight. The clasp shall be capable of self-release from the bottom weight when the chain is subjected to accidental loads.
• The BOTTOM WEIGHTS shall be molded from high quality plastic and shall weigh not less than 32 gms. each, to ensure constant tensioned straightness of the fabric slats.