Listing ID #3832049
Company Information
Ask for more detail from the seller
Contact SupplierY-Type Strainers are typically used in application where the amount of solids to be removed is small, and where frequent clean – out is not required.They are most commonly used in pressurized lines, gas or liquid, but can also be used in suction or vacuum conditions.
“Y” Strainer mechanically removing solids from flowing liquids, Air, Steam or gases by means of a perforated or wire mesh straining element.
OPERATING PRINCIPLES –Y-Strainer has the advantage of being able to be installed in either a horizontal or vertical position.
The screening element or “leg” must be on the “downside” of the strainer body so that entrapped solids can be properly collected and held for disposal.
A blow down plug on the drain port will allow clean-out without removal of the screen, and without interrupting the process flow.
FEATURES & OPTIONS:-Cast Iron to ASTM A 126 Class B
IS 210 GR. FG 200 / 220 / 260
Cast Carbon Steel to ASTM A 216 GR. WCB
Stainless Steel to ASTM A 351 GR. CF 8 / 8M / 3 / 3M
Carbon Steel to IS 2062 (Fabricated Type)
S.S. 304 / 316 / 304L / 316L (Fabricated Type)
Others on request
S.S. 304
S.S. 316
S.S. 304L
S.S. 316L
Brass
Design Std. : Mfg. Standard
Pressure Testing : Mfg. Standard
Face To Face : Mfg. Standard
Flange Drilling : ANSI B 16.5 / BS 10 Table / DIN / IS 6392
Pressure Rating : 125#, 150#
Size Range : 40mm (1½”) To 300mm (12”)