Epoxy Coatings #5936379

Anti fouling coating is use as the outer layer to the hull of a boat to prevent the attachment of unwanted organisms like alagie, fungus, rust etc. It is a type of coating that is used as underwater hull paint or we can say bottom paint of ships.

Features:

• Antifouling coating is used as barrier against corrosion on metal hulls.
• Antifouling Coating improves the efficiency, reduced fuel consumption, protect the engine, increase the speed and performance of boat .It improves the water flow around the hull.

A two pack polyamidoamine cured fortified epoxy super high build mastic surface tolerant coating designed for application on manually cleaned steel surface as well as concrete surface. The product can be applied over most of the tightly adhering aged coatings and recommended as maintenance primer with suitable top coats.

It is a composition of thermoplastic resin with plasticizer and having fast drying properties. Here we provide cold type road marking coating in yellow, white, black, orange and grey color.

Epoxy coatings are formed on the basis of customer requirement or the requirement for the end product. We have to mix catalyst with base and applied, epoxies component produce a hard, chemical and solvent resistant finish. Basically they are used on steel and concrete to give resistance to alkali, water and acids.

• 1st Coat :A two pack polyamide cured, epoxy anticorrosive primer containing Zinc phosphate pigment. The red version contains red oxide of iron apart from zinc phosphate. The primer gives excellent adhesion to steel. It is compatible with a wide range of topcoats and thus forms highly efficient protective schemes for corrosive, coastal and chemical environments.
• 2nd Coat :A two pack polyamide cured high build epoxy coating based on laminar micaceous iron oxide pigment. Designed for application on structural steel as an intermediate or finish coat exposed to aggressive coastal and industrial environment. The product acts as a tough barrier coat with excellent impermeability to moisture. The grey version contains Titanium dioxide pigment apart from MIO pigment.
• 3rd Coat :A two pack polyamide cured High Build epoxy coating specially formulated as a finish coat for the protection of steel and concrete surfaces exposed to humid, saline and chemical environment. This coating when overcoated by Polyurethane finish immensely upgrades the anticorrosive performance of the system with outstanding weathering resistance and colour retention.

• 1st Coat :A two pack phenolic amine cured high solid, high build epoxy primer with high level of anticorrosive zinc phosphate pigment loading for long term protection of steel in severely corrosive industrial and coastal environment.It is overcoatable with a wide range of intermediates and top coats and ideal for application for application in areas where higher thickness is required for achieving optimum performance.
• 2nd Coat :A two pack Amine-adduct cured high build phenolic epoxy tank lining specially formulated to provide maximum chemical resistance combined with very good temperature and wear resistance. The coating has excellent resistance to crude oil, refined and unleaded petroleum products, MTBE, ATF, caustic solution, selected range of aromatic/aliphatic solvents, most commonly stored chemical products and fresh/saline/hot water. It is recommended for use on structural steel, equipment and concrete substrate exposed to severe chemical environments.

A two pack polyamide cured high build high performance epoxy Zinc Rich Primer with optimum loading of zinc dust for excellent cathodic protection of blast cleaned steel structures. This primer is compatible with a wide range of topcoats and it enhances protective property of a paint system to a great extent. This primer is widely used where a long-term protection is required in saline and corrosive environment.

• 1st Coat :A chlorinated rubber based anti-corrosive primer containing zinc phosphate pigment. When top coated with Chlorokote finish, the coating system exhibits superb water impermeability and resistance to acid fumes. An economical coating system for structural steel, equipments etc, in coastal and chemical environment. This red version contains red oxide of iron apart from zinc phosphate pigment.
• 2nd Coat :A high build Chlorinated rubber based intermediate coat with lamellar micaceous iron oxide pigment. The coating imparts tough and durable film with exceptional impermeability to moisture and many industrial chemicals. The grey version contains Titanium dioxide apart from micaceous iron oxide pigment.
• 3rd Coat :A chlorinated rubber finishes using selective chemical and weather resistant pigments for protection of steel and concrete stuctures in coastal and chemical environment. The coating renders tough glossy film with high resistance to moisture penetration, fungus growth, fumes and spillage of most acids and chemicals. The coating is ideal for application on swimming pools.

A two pack low VOC high build mastic surface tolerant epoxy coating reinforced with chemically inert glass flake for application on manually cleaned steel surface for enhanced durability and corrosion Resistance of steel structures in all corrosive environment including splash zone areas of offshore Structures. This product can be applied over most of the tightly adhering aged coatings and concrete Surface. It is widely used as maintenance primer and self priming finish.

• 1St Type :It is a type of alkyd based enamel high build coating for direct application on metal surface, after the surface preparation .In this paint having rust inhibitive properties, well gloss and give good protection in one coat outstanding for long term flexibility.
• 2nd Type :It is a type of Polyurethane based paint high build coating and good environment protection for direct application on metal surface, after the surface preparation .In this paint having rust inhibitive properties, well gloss and give good protection in one coat outstanding for long term flexibility.

Basically this type of coating is made for prevent the corrosion under insulation. This coating is recommended for the temperature from -185 to 600 degree centigrade and suitable for insulated and non insulted surface.

Features:

• Surface tolerant coating.
• Temperature resistant up to -185 to 650 degree centigrade.
• Corosion protection under insulation and non insulation part.

This is a type of coating which give a reliable fire protection for steel and cables .We provide different range of intumescent coating for more durable and long term protection for every type of specification.

We provide this intumescent coating for 30 , 60 , 90 and 120 minute rating for passive fire protection.

Fire protection coating is used in almost every sector of the industry like:-

• Offshore installation:Hydrocarbons and jet fire protection areas such as blast wall & structural steel , piping and under deck .
  Application:
  • Offshore terminals
  • Floating oil and gas production and storage vessel.
  • Fixed oil and Gas platforms
• Industrial Installation:Hydrocarbons, cellulosic and sometimes jet fire protection area like pipeline, vessels located on
  Application:
  • Oil sand plant
  • Refineries
  • Petrochemical Plants.
  • Nuclear Power Plant
  • Chemical Plants.
  • Fertilizer Plant.
• Building Instalxlation :Usually cellulosic , but sometimes hydrocarbon fire protection for internal and external area.
  Application:
  • Airports & Transportation place.
  • Commercial building
  • Shopping Malls.
  • Stadium
  • Bridges.
  • Building.

Long term protection against corrosion, robust. Strong mechanical characteristics so that coating can be with stand with impact and constant abrasion of heavy, dense cargoes such as iron ores .

Features:

• Maximize technical performance.
• Outstanding chemical resistance so that the widest possible range of active cargoes can be carried.
• Easy cleaning of the coating speeds up pre loading inspections.

Polysiloxane coating is a one of the most protective and maintenance coating for extreme Ultraviolet , abrasion, chemicals and high temperature . The polysiloxane comes from polymer with silicone oxygen back bone. This product gives much more resistant to ultraviolet rays then the carbon-carbon back bone of organic polymer.

Features:

• Good Chemical Resistant.
• Good Anti fungus Coating.
• Corrosion Resistant.
• Low VOC.
• Good Anti-Graffiti Properties.
• Excellent Gloss Retention.
• Excellent Work Against Ultra Violet Radiation:

This Coating is applied where we need long term protection for steel in severely corrosive environment .And It is recommended for primer coat not for top coat thats why we known these type of product Sacrificial Life Product.

Features:

• Good Mechanical Strength.
• Reduce the Effect Of Corrosion.
• High tolerance for several type of climate.
• Improved cracked resistance.
• Self healing of micro cracks.
• Excellent Protection.

Here we talk about heat resistant polysiloxane coating which is basically made by silicone based .

Features:

• Long term protection for steel
• hot tanks
• Hot Pipeline
• Smoke stacks and
• Other hot surfaces.

This Coating is used for high resistance to extreme weather and high gloss also. It is best for outdoor where considerable amount of sunlight is present.

• Protect to ultraviolet rays.
• Good Gloss
• Good Mechanical Properties

Application:Car bumpers, Car Name Plates, Garden Furnitures, Window Frames.

A specially formulated graphite pigmented bituminous coating designed to prevent corrosion and pitting of hot-wet metal surfaces in Boiler interiors, Evaporators, Tubes, Economizers, Clarifiers and similar other plants operating with hot water and steam above 100o C. The cured coating is inert and highly impervious to hot water. It renders a surface to which deposits do not easily attach, and if attached, can be easily removed thereby simplifying cleaning and decaling operations.

This primer is use as a general primer for high build film thickness having which we called urethane modified alkyd primer .Basically it is applied on steel for corrosion protection to medium atmospheric environment .

Features:

• Good Adhesion
• Good Adhesion
• Easily Available in stock.
• Life of this product is more compare to other industrial products.
• Well Protection for steel in medium environment.