Our Products
We are manufacturing Soft Solder in the form of Sticks, Ingots & Bars as per IS:193-2000 Specification. They are used in Electronics, Plumbing & Sheet Metal Work. They are Lead Based Alloys & Lead Free Alloys. The Alloys manufactured by us are as tabulated as follows: -
Grade | Non-Antimonial Solders, Percent | |||||
| Sn | Sb | Pb | |||
Sn 65 | 65 + 0.5 | 0.65 Max | Remainder | |||
Sn 60 | 60 + 0.5 | 0.60 Max | Remainder | |||
Sn 50 | 50 + 0.5 | 0.50 Max | Remainder | |||
Sn 45 | 45 + 0.5 | 0.45 Max | Remainder | |||
Sn 40 | 40 + 0.5 | 0.40 Max | Remainder | |||
Sn 35 | 35 + 0.5 | 0.35 Max | Remainder | |||
Sn 30 | 30 + 0.5 | 0.30 Max | Remainder | |||
Sn 20 | 20 + 0.5 | 0.20 Max | Remainder | |||
Sn 15 | 15 + 0.5 | 0.20 Max | Remainder | |||
Sn 50 Sb | 50 + 0.5 | 2.5 – 3.0 | Remainder | |||
Sn 45 Sb | 45 + 0.5 | 2.2 - 2.7 | Remainder | |||
Sn 40 Sb | 40 + 0.5 | 2.0 – 2.4 | Remainder | |||
Sn 32 Sb | 32 + 0.5 | 1.6 – 1.9 | Remainder | |||
Sn 30 Sb | 30 + 0.5 | 1.5 – 1.8 | Remainder | |||
Sn 18 Sb | 18 + 0.5 | 0.9 – 1.2 | Remainder | |||
Sn 2 Sb | 2 + 0.5 | 0.2 – 0.5 | Remainder | |||
Grade | Sn | Sb | Pb | Ag | ||
Sn 95 Sb | 95 + 0.5 | 4.75 – 5.25 | 0.07 Max | 0.02 Max | ||
Constituent | Grade, Percent | |||||
| Sn 38 | Sn 2 | ||||
Tin | 38 + 0.5 | 2 + 0.25 | ||||
Antimony, Max | 0.06 | 0.06 | ||||
Arsenic, Max | 0.015 | 0.015 | ||||
Iron, Max | 0.02 | 0.02 | ||||
Alumnium, Max | 0.001 | 0.001 | ||||
Zinc, Max | 0.003 | 0.003 | ||||
Cadmium, Max | 0.005 | 0.005 | ||||
Nickel, Max | 0.002 | 0.002 | ||||
Bismuth, Max | 0.05 | 0.05 | ||||
Silver, Max | 0.02 | 0.02 | ||||
Copper, Max | 0.05 | 0.05 | ||||
Lead | Remainder | Remainder |
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T,
Packaging Details : They are packed in Polymer Sacks After Which They are packed in Jute Cloth To Avoid Damage To The Sticks, Bars & Ingots. They are loaded into containers after been enclosed in Wooden Crates. They are loaded onto Vehicles for transportation by Road.
Delivery Time : As Per Order & Quantity of Manufacture
Gun Metal Bushes manufactured by us are as per IS:10742-1983 Specification. Bushes manufactured by us range from Nominal Bore of 10mm to 500mm & from there to greater than 1 Meter which come in form of rings. Bushes are manufactured as cast and then proof machined with machinable tolerances to be supplied to the end user. In our Foundry, Bushes are manufactured as per three grades as tabulated below: -
Constituents | Percentage Composition | ||
| Grade -1 | Grade - 2 | Grade - 3 |
Tin | 4.0-6.0 | 6.0-8.0 | 9.5-10.5 |
Zinc | 4.0-6.0 | 1.5-3.0 | 1.75-2.75 |
Lead | 4.0-6.0 | 2.5-5.5 | 0-1.5 |
Nickel | 2.0 Max | 2.0 Max | 1.0 Max |
Iron | 0.35 Max | 0.35 Max | 0.15 Max |
Aluminium | 0.01 Max | 0.01 Max | ------------- |
Total Impurities | 0.8 Max | 0.7 Max | 0.5 Max |
Copper | Remainder | Remainder | Remainder |
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T,
Packaging Details : They are packed in Poly Sacks & Gunny Bags after which they are wrapped inside a sheath of Hay before being loaded on to containers. They are also packed in Jute Cloth and loaded loose on the vehicle.
Delivery Time : As Per Order & Quantity & Criticality of Manufacture
Zinc is a common additive to base metals to create Zinc Alloys. These alloys are formed and worked into various applications depending on the types of metals that are alloyed together. Zinc is usually considered a weak base metal. It is very brittle due to which it is used in Coating & Galvanizing applications where other metals will take on Load Bearing Duties. When Zinc is alloyed with other stronger metals, it can attain a higher impact strength. The alloyed metal also provides electrochemical properties and is extremely malleable in extremely malleable in lower working conditions between 2000 F - 3000 F. Due to these properties, the metal is used in more complex fabrication and galvanizing processes. Zinc also has good corrosion resistance properties. Zinc Alloys have varied uses based on industries. In addition, the purity level of zinc also decides which application the Zinc would be used in. Zinc Alloys are used in various applications like Automotive Industries where they are used for coatings for galvanized steel. Galvanizing Steel Parts and components helps in preventing corrosion. In medical field, zinc alloys are used since they are considered environmentally safe. In Buildings & Constructions, Zinc alloys are used in a wide range of applications as products. They are used as solder, household fittings and as coating on roofing & cladding products. Zinc Alloys find use in marine applications where they are used as sacrificial anodes for marine vessels and other applications that are exposed to saltwater environments. The Following table lists the Zinc Alloys Manufactured by us: -
General Designation | ASTM Designation | Percentage Composition | ||||||||
|
| Al | Cu | Mg | Fe Maximum | Pb Maximum | Cd Maximum | Sn Maximum | Ni | Zn |
Zamak 2 | AC43A | 3.5-4.3 | 2.5-3.0 | 0.02-0.05 | 0.100 | 0.005 | 0.004 | 0.003 | --------------- | Remainder |
Zamak 3 | AG40A | 3.5-4.3 | 0.25 Max | 0.02-0.05 | 0.100 | 0.005 | 0.004 | 0.003 |
| Remainder |
Zamak 5 | AC41A | 3.5-4.3 | 0.75-1.25 | 0.03-0.08 | 0.100 | 0.005 | 0.004 | 0.003 |
| Remainder |
Zamak 7 | AG40B | 3.5-4.3 | 0.25 Max | 0.005-0.02 | 0.075 | 0.003 | 0.002 | 0.001 | 0.005-0.020 | Remainder |
ZA - 8 |
| 8.0-8.8 | 0.8-1.3 | 0.015-0.030 | 0.075 | 0.006 | 0.006 | 0.003 |
| Remainder |
ACuZinc5 |
| 2.5-3.3 | 5.0-6.0 | 0.025-0.05 | 0.075 | 0.005 | 0.004 | 0.003 |
| Remainder |
ZA - 12 |
| 10.8-11.5 | 0.5-1.2 | 0.020-0.030 | 0.05 | 0.005 | 0.005 | 0.002 |
| Remainder |
ZA - 27 |
| 25.5-28.0 | 2.0-2.5 | 0.012-0.020 | 0.07 | 0.005 | 0.005 | 0.002 |
| Remainder |
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T,
Packaging Details : They are packed in Polymer Cloth Or Jute Cloth Before Being Loaded Into Containers For Shipping Overseas.
Delivery Time : As Per Order & Quantity to be Manufactured
We are casting Copper Silicon Alloys Ingots which are Copper Master Alloys cast in our works. Copper Master Alloys are precursors of Ready Made Alloys to be fed for melting and casting. There are two grades of Copper Silicon Alloys Cast By us namely Cu Si10, Cu Si15. Cu Si10 contains 9% - 11% Silicon and balance of Copper. Cu Si15 contains 14% - 16% Silicon & Copper as Balance. Copper Master alloys are semifinished products which act as grain refiners, modifiers or hardners based on their usage. They enable obtaining a particular chemical specification by changing the liquid metal's composition. They have better dissolving properties in comparison with Pire Metals. Copper silicon alloys are used for precipitation hardening of low alloyed Copper and for improving the castabiity of Brass & Copper Nickel Alloys.
In Our Foundry, we are casting Copper Aluminium Alloys Ingots as per IS:5743-1991 Reaffirmed 2006. We are casting Copper Aluminium Alloysas per Designations as Cu Al 50 & Cu Al 60. These are master alloys of Copper which are required for Remelting & alloying to produce finished industrial castings. Aluminium Copper Alloys are mainly used in Aircraft Construction where their low corrosion resistance plays a subordinate role. Corrosion resistance can greatly be enhanced by the Metallurgical Bonding of high purity Aluminium surface Layer referred to as alclad-duralam.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T,
Packaging Details : They are packed in Jute Clothes & Gunny Bags Are Loaded On To The Container for shipping or Loaded onto Vehicles for Transportation by Road, Railways & Air.
Delivery Time : As Per Order & Quantity of Manufacture
Brass Plates are manufactured by us in sizes ranging from "400mm Length X 100mm Width X 16mm Thickness" to "1200mm Length X 1200mm Width X 60mm Thickness". They are cast & Proof Machined. They are Cast as per IS:292-1981 Or Latest Specifications. Castings are proof machined and polished to give a clear & shiny surface from from dirt and impurities. They are required in applications like Plumbing Fixtures & Equipments, Electrical Components, Circuit Boards & Circuit Frames, Engraved Plates, Construction & Archetectural Applications, Bolts, Brackets, Fasners & Hinges, Gears, Door Handles, Knobs & Handrails, Heating Equipments Including Heart Exchangers, Building Materials Etc.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T,
Packaging Details : They are packed in Gunny Bags & enclosed in Wooden Crates Before being Loaded onto Containers. They are also packed in polypropylene Bags before being loaded on to the vehicle.
Delivery Time : As Per Order & Quantity of Materials to be manufactured
We are manufacturing Free Cutting Brass Bars, Rods & Sections as per IS:319-2007. We are casting Free Cutting Brass Rods & Bars Up to a Length of 375mm & Upto a Diameter of 180mm. Free Cutting Brass can easily be machined with a minimum of tool wear & breakage. This multi-purpose alloy is readily soldered & brazed. It is a commonly used alloy for screw machine stock in applications requiring drilling, turning, milling, tread rolling & tapping because of its 100 Percent Machinability Rating. The Lead Content Provides machinabilitty while preventing welding. This alloy is excellent for high speed machining, has good corrosion resistance, has smooth finish & readily accepts plating. Free Cutting Brass cannot be heat treated and its typical applications include plumbing fitting, hydraulic base fitting, adapters & valve adapters. The two grades of this alloy as per specification are tabulated below: -
Name of Constituent | Percentage Composition | |
| Grade - 1 | Grade - 2 |
Copper | 56.0 – 59.0 | 60.0-63.0 |
Lead | 2.0 – 3.5 | 2.5 – 3.7 |
Iron | 0.35 Max | 0.35 Max |
Total of Other Impurities (Excluding Iron) | 0.7 Max | 0.5 Max |
Zinc | Remainder | Remainder |
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T,
Packaging Details : They are packed in Wooden Runners & Loaded Onto Vehicles Or Containers for Ocean Freight & Export.
Delivery Time : As Per Order & Quantity of Manufacture
We are manufacturing Copper Silicon Alloys as per IS:5743-1991 Reaffirmed 2006. When Copper is alloyed with Silicon, the later provides fluidity properties to the alloy prepared as well as significantly increases the strength of the alloy and makes it corrosion resistant. Silicon removes the oxygen from Copper when worked. In our foundry we are manufacturing 2 alloys of Silicon Copper namely CuSi10 which contains 9.0-11.0 Percent Silicon & CuSi15 containing 14.0-16.0 Percent Silicon. The master alloys ingots prepared are in the form of notched Bars Or as required by the Purchaser. The Ingots formed are reasonably uniform in quality and free from dross, flux and other harmful contamination. They are used in applications like marine hardware, electrical & architectural components.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T,
Packaging Details : They are packed either loose in Containers or in Jute Cloth & Loaded On To Containers for dispatch by sea. For delivery within India, they are packed and loaded on to Vehicle for Road transportation.
Delivery Time : As Per Order & Quantity of Manufacture
Besides being a manufacturer, we are stocking Cadmium Ingots To Electrolytic Grades which we are supplying to Buyers at competitive prices. Sticks come in various sizes as weight as per Brands. Cadmium Ingots are have Low Melting Points and find uses in the control of Nuclear Fission as well as Electroplating & Soldering. They are also used in Batteries which make use of Nickel-Cadmium Alloys.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T,
Packaging Details : They are packed in Poly Sacks & Enclosed In Wooden Crates before being loaded onto containers For Export Purposes. They are also loosely packed & loaded onto vehicles for transportation by Road, Railways Or Air.
Delivery Time : As Per Order & Quantity of Manufacture
We are casting Manganese Bronze Alloys Ingots & Castings as per Chemical
Compositions as tabulated below: -
Copper Alloys | Standard | Cu | Sn | Pb | Zn | Fe | Ni | P | Al | Mn | Si | Sb | Impurities |
C86550 | ASTM | 57.0 Min | 1.0 | 0.5 | Remainder | 0.7-2.0 | 1.0 |
| 0.5-2.5 | 0.1-3.0 | 0.1 |
|
|
C87655 | EN | 56.0-64.0 | 0.8 | 0.5 | Remainder | 0.5-1.8 | 6.0 | 0.02 | 0.7-2.2 | 0.5-2.5 | 0.1 | 0.06 |
|
C86300 | ASTM | 60.0-66.0 | 0.20 | 0.20 | 22.0 – 28.0 | 2.0-4.0 | 1.0 |
| 5.0-7.5 | 2.5-5.0 |
|
|
|
HTB-1 | BS:1400-1985 | 55.0 Min | 1.00 | 0.5 | Remainder | 0.7-2.0 | 1.0 |
| 0.5-2.5 | 0.1-3.0 | 0.1 |
| 0.2 |
HTB-2 | BS:1400-1985 | 55.0 Min | 0.2 | 0.2 | Remainder | 1.5-3.25 |
|
| 3.0-6.0 | 4.0 | 0.1 |
| 0.2 |
HTB-3 | BS:1400-1985 | 55.0 Min | 0.2 | 0.2 | Remainder | 1.5-3.25 | 1.0 |
| 3.0-6.0 | 1.5-4.0 | 0.1 |
| 0.2 |
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T,
Packaging Details : They are packed in Jute Clothes Or Polymer Sacks. They are loaded into containers or vehicles for shipping by road, rail, air or seas.
Delivery Time : As Per Order & Quantity of Manufacture
We are casting Gun Metal Rods & Bars as per IS:10742-1983. Gun Metal Rods cast by us range from 20mm Diameter To 300mm Diameter & Length Up to 500mm. The Rods Cast by us are as tabulated below: -
Constituent | Percentage Composition | ||
| Grade - 1 | Grade - 2 | Grade - 3 |
Tin | 4.0-6.0 | 6.0-8.0 | 9.5-10.5 |
Zinc | 4.0-6.0 | 1.5-3.0 | 1.75-2.75 |
Lead | 4.0-6.0 | 2.5-5.5 | 0-1.5 |
Nickel | 2.0 Max | 2.0 Max | 1.0 Max |
Iron | 0.35 Max | 0.35 Max | 0.15 Max |
Aluminium | 0.01 Max | 0.01 Max |
|
Total Impurities | 0.8 Max | 0.7 Max | 0.5 Max |
Copper | Remainder | Remainder | Remainder |
Gun Metal Rods & Bars are used in bearings, bushings, pumps, impellers, piston rings, pump bodies, valve components, steam fittings, gears etc. They are also use in Construction Projects.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T,
Packaging Details : They are packed & arranged in wooden runners & crates or cartoons after which they are loaded into Containers for shipping. They are also loaded into vehicles for transportation by Road.
Delivery Time : As Per Order & Quantity of Manufacture
Besides our Own Foundry Consumption, we are Stockists & Resellers of Tin Ingots which come in Malaysian, Indonesian & Chinese Brands. Tin Ingots available with us are 99.99 Percent Pure. We do offer our best prices which are acceptable by many buyers in our State & Outside. However, depending on end user, we are customizing our products to 99.85 Percent Purity & 99.75 Percent Purity which are available with us as per demand.
Copper Nickel Alloys Ingots are cast as per CuNi10 & CuNi30 Alloys Containing 10 Percent to 30 Percent Nickel Respectively. They are remelted for manufacturing of Castings & other finished products which are chiefly required in various marine applications.
Additional Information:
Payment Terms :
Packaging Details : Packed in Gunny Bags & Loaded Into Containers.
Delivery Time : Depending Upon Location & Quantity Including Packing Conditions
We are manufacturing Gunmetal Flanges as per various sizes and specification and customizing to the appropriate needs from Customers. Gunmetal Flange is mechanically designed to fit into pipes of different circumference and radius. It is uniquely designed to suit the manufacturing requirements of petro-chemical and chemical industries. It is used in applications like Pumps, Valves. Vessels in manufacturing & Food Processing, in pipe connections of Industrial waterworks, heat exchangers & heating systems of all sizes. The following table depicts the chemical composition of various grades of Gunmetal Flanges manufactured by us: -
Constituents | Percentage Composition | ||
| Grade -1 | Grade - 2 | Grade - 3 |
Tin | 4.0-6.0 | 6.0-8.0 | 9.5-10.5 |
Zinc | 4.0-6.0 | 1.5-3.0 | 1.75-2.75 |
Lead | 4.0-6.0 | 2.5-5.5 | 0-1.5 |
Nickel | 2.0 Max | 2.0 Max | 1.0 Max |
Iron | 0.35 Max | 0.35 Max | 0.15 Max |
Aluminium | 0.01 Max | 0.01 Max | ------------- |
Total Impurities | 0.8 Max | 0.7 Max | 0.5 Max |
Copper | Remainder | Remainder | Remainder |
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T,
Packaging Details : They are packed in Jute Clothes with straw padding to avoid damages after which they are packed in Wooden Crates & Loaded Into The Vehicle For Transportation By Road, Railways, Air Or Seas.
Delivery Time : As Per Order & Quantity of Manufacture
We are manufacturing Naval Brass Rods as per Drawings & Specific applications. Nava Brass refers to a Copper Alloy of Around 59% Copper, 40% Zinc & 1% Tin with a trace amount of Lead. Naval Brass is an alloy which falls into the subfamily of Brasses known as Alpha Beta or Duplex Brasses. These Alpha Beta Brasses are generally harder & strong than non alpha beta brasses. Naval Brass Rods are required for seawater applications. The presence of Lead in Naval Brass improves the corrosion resistance properties of the Material. C464 Naval Brass Rods has a fair machinibility with about 35% of Free Machining Brass. In Our Firm, we are manufacturing Naval Brass Rods Up To 500mm in Length of each rod and diameter from 30mm to 100mm. Naval Brass Rods are required in propeller shafts, marine hardware, decorative fittings, shaftings, propeller shafts and turn buckles. They are also used in many other industrial applications like welding rods, condenser plates, structural uses, valve stems, balls, heat exchanger tubes, aircraft turnbuckel barrels, dies & many more.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T,
Packaging Details : They are packed and loaded in Wooden Runners and Tied Safely for Transportation. During Export, they are packed in Jute Cloth Before Being Loaded Onto Containers for Shipping.
Delivery Time : As Per Order & Quantity to be manufactured
Copper Ingots are produced by us as per IS:191-2007 Specification. Ingots produced are used for remelting & alloying for producing Castings that are processed as Finished Goods. Electrolytic Tough Pitch Grade Copper is used in Electrical Engineering & Domestic Electricity. Pure Copper is extremely ductile and capable of being formed into a wide range of products especially wire. It has uniquely high values of Thermal & Electrical Conductivity. The High Electrical Conductivity is especially important for the efficient transmission and utilization of electrical energyand copper is therefore the principal material for building wire and cables, busbars, and motor & transformer windings. In our Foundry, we are casting Pure Graded Copper as well as Commercial Graded Copper according to area of application and range of use.
We are manufacturing High Tensile Brass Rods & Sections as per IS:320-1980 Specification. In our Foundry, we are casting High Tensile Brass Rods & Sections in dimensions ranging from 30mm to 180mm in Diameter & Upto 500mm in Length. The Condition of delivery of High Tensile Brass is as manufactured and proof machined and sometimes annealing them to meet the properties as required by the Buyer. High Tensile Brass is a Copper Zinc Alloy which combines with Additives to increase the Tensile Strength over that of the simple binary Copper Zinc Brass. The Chemical Composition of the alloys under Grades as per specification are tabulated as below: -
Constituent | Percentage Composition | |
| Grade HT-1 | Grade HT-2 |
Copper Plus Incidental Nickel | 56.0 – 60.0 | 56.0 - 61.0 |
Tin | 0.2 – 1.0 | 1.0 Max |
Lead | 0.20 – 1.5 | 0.50 – 1.5 |
Iron | 0.20 – 1.25 | 0.20 – 1.5 |
Manganese | 0.25 – 2.0 | 0.50 – 2.0 |
Aluminium | 0.20, Max | 0.3 – 2.0 |
Antimony | 0.02 Max | 0.02 Max |
Total of Other Elements | 0.50 Max | 0.50 Max |
Zinc | Remainder | Remainder |
Our Firm is capable of producing High Tensile Brass Solid & Holow Rods.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T,
Packaging Details : They are packed in Wooden Runners & Tied After Been Loaded Onto The Vehicle Or When Loaded into Containers for export they are packed further to ensure the materials' safety and security during Shipping.
Delivery Time : As Per Order & Quantity of Manufacture
We are castings Ingots/SemiFinished Products of Aluminium Bronze Alloys of Special Grade as tabulated below: -
Copper Alloys | Standard | Cu | Sn | Pb | Zn | Fe | Ni | P | Al | Mn | Si | Impurities |
AB-3 | BS:1400-1985 | Remainder | 0.1 | 0.03 | 0.4 | 0.5-0.7 | 0.1 |
| 6.0-6.4 | 0.5 | 2.0-2.4 | 0.8 |
ALBC-1 | JIS | 85.0-95.0 | 0.1 | 0.1 | 0.15 | 1.0-3.0 | 0.1-1.0 |
| 8.0-10.0 | 0.1-1.0 |
|
|
ALBC-2 | JIS | 80.0-88.0 | 0.1 | 0.1 | 0.5 | 2.5-5.0 | 1.0-3.0 |
| 8.0-10.15 | 0.1-1.5 |
|
|
ALBC-3 | JIS | 78.0-85.0 | 0.1 | 0.1 | 0.5 | 3.0-6.0 | 3.0-6.0 |
| 8.15-10.15 | 0.1-1.15 |
|
|
ALBC-4 | JIS | 71.0-84.0 | 0.1 | 0.1 | 0.15 | 2.0-5.0 | 1.0-4.0 |
| 6.0-9.0 | 7.0-15.0 |
|
|
G-CuAl10Fe | DIN | 83.0-89.0 | 0.2 | 0.1 | 0.4 | 2.0-3.8 | 2.7 |
| 8.7-10.7 | 0.8 | 0.1 | 1.0 |
G-CuAl10Ni | DIN | 76.0-80.5 | 0.1 | 0.03 | 0.2 | 3.5-5.3 | 4.5-6.3 |
| 9.0-10.6 | 2.3 | 0.07 | 0.8 |
C95300 | ASTM | 86.0- |
|
|
| 0.8-1.5 |
|
| 9.0-11.0 |
|
|
|
C95400 | ASTM | 83.0- |
|
|
| 3.0-5.0 | 1.5 |
| 10.0-11.5 | 0.5 |
|
|
C95500 | ASTM | 78.0- |
| 0.03 |
| 3.5-4.5 | 4.5 |
| 8.5-9.5 | 0.8-1.5 | 0.1 |
|
C95800 | ASTM | 78.0- |
| 0.03 |
| 3.5-4.5 | 4.5 |
| 8.5-9.5 | 0.8-1.5 | 0.1 |
|
G-CuAl11Fe4 | UNI5274 | 81.0-87.0 | 0.2 | 0.05 | 0.2 | 3.0-5.0 | 2.5 |
| 10.0-11.5 | 1.0 | 0.05 | 0.4 |
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T,
Packaging Details : They are packed in Gunny Bags Or Sacks of Jute Cloth & Hence Enclosed in Heavy Packing Before Being Loaded On to Containers Or Vehicles for Shipping/ Road transportation/Air/Railways.
Delivery Time : As Per Order & Quantity of Manufacture
In our Foundry, we are manufacturing Copper Phosphorous Alloys Ingots as per IS:5743-1991 Reaffirmed 2006. Copper Phosphorous Alloys are manufactured in the form of Ingots, Notchaed Bars & In Lumpy Condition. Presently we are manufacturing alloys as per designations CuP10 having 9.0-11.0 Percent Phosphorous & CuP15 having 13.0-15.0 Percent Phosphorous. Phosphorous is a chemical element which has deoxidizing properties. When Copper is malted, oxygen & other gasses from the environment and within the processes will get into the molten metal. These gases mke the metal too porous to be worked and will develp cracks when used for certian applications. Phosphorous helps to remove the oxygen and other gases from Copper during the melt as it increases the strength of Copper. It causes little reaction and dorss formation. As Phosphorous is added to molten Copper, it forms phosphorous pentoxide which results due to the combination of Phosphorous with Oxygen. This Phosphorous Pentaoxide is then removed when the Copper undergoes the refining process. The remaining Phosphorous ends up in the solution with Copper. Copper Phosphorous provides a range of other benefits like improving Tensile Strength, Removes Brittleness Characteristics and improves machinability & workability.
Additional Information:
Packaging Details : They are packed in Gunny Bags & Enclosed in Wooden Crates.
Delivery Time : Depending Upon Country of Export & Material Quantity
We are casting Phosphorous Bronze Plates as per IS:28-1985 Specification. Phosphorous Bronze Plates cast by us range from "600mm Length X 400mm Width X 16mm Thickness" to "1000mm Length X 1000mmWidth X 50mm Thickness. They are cast maintaining machinable tolerances and customized as per various applications and conditions of use. We have supplied Phosphorous Bronze Plates to Indian Railways chiefly in applications where they come of use in Girders for Railway Bridges. They are also used for Masonry Fixings, Shafts & Gears, Valve Parts, Electrical Springs, Marine & Chemical Hardware, Spring Washers, Electrical Conductors & Switches, Decorative Items.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T,
Packaging Details : They are packed in Gunny Bags & Enclosed inside Wooden Crates after which they are loaded onto Containers/Carrying Vehicle By Road.
Delivery Time : As Per Order & Quantity to be Manufactures
We are casting Phosphorous Bronze Bush as per IS:28:1985 Or Latest Specifications according to Grade 1, Grade 2, Grade 3, Grade 4, Grade 5. Phosphorous Bronze is an exceptionally strong and resilient metal making it suitable for Products with required fatigue resistance and against wear & chemical corrosion/exposure to the elements. We are manufacturing Bushings/ Bushes to Length of Upto 500mm. Phosphorous Bronze Bushes are plastic in nature which makes them ideal for heavy load applications. The Bushes/Bushings manufactured by us have charatteristics like dimensional & rotational accuracy, high tensile strength & have the ability to withstand high Temperatures & Pressure.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T,
Packaging Details : They are packed Loose or in Gunny Bags which are hence packed in Wooden Crates. For export they are packed safely and loaded onto Containers.
Delivery Time : As Per Order & Quantity Required
In our Firm, we are casting Tin Bronze Ingots & Castings as per IS:306-1983 Or Latest Specification. We are casting Ingots weighing between 7Kg - 10Kg & 12Kg - 15Kg which are used for Remelting & Alloying For Producing Finished Products in Large Scale Industries. The Castings Prepared by us range from weights of 0.300 Kg to 150 Kg in weight & are required in various applications. Castings are supplied with reasonable tolerances due to which they are machined again at the End User's Site. It is ensured that castings are clean and free from harmful defects such as blow holes and gas cavities. Tin Bronze Castings are utilized in movable bridge components, turntables for bridges and other structures for fixed and expansion bearings with slow and intermittent movement with heavy Loads. They are found in Gear, High Strength Bushing. This alloy is used in pump impellers, piston rings, steam fittings and valve bodies.
Constituents | Percentage Composition | |
| Ingots | Castings |
Tin | 9.5-10.5 | 9.5-10.5 |
Zinc | 1.75-3.25 | 1.5-3.0 |
Lead | 1.5 Max | 1.5 Max |
Nickel | 1.0 Max | 1.0 Max |
Iron | 0.15 Max | 0.15 Max |
Aluminium | 0.01 Max | 0.01 Max |
Silicon | 0.02 Max | 0.02 Max |
Bismuth | 0.03 Max | 0.03 Max |
Total Impurities, Max (Includes Iron, aluminium, arsenic, antimony, silicon, bismuth) | 0.50 Max | 0.50 Max |
Copper | Remainder | Remainder |
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T,
Packaging Details : They are packed in Jute Cloth & Polymer Cloth. After that, they are packed in Wooden Crates to prevent damage during transportation.
Delivery Time : As Per Order & Quantity of Manufacture
High Tensile Brass Ingots & Castings are cast as per IS:304-1981 Reaffirmed 2006. This standard covers the requirements for 2 Grades of High Tensile Brass Ingots for remelting purposes and castings. The Ingots cast by us are of uniform quality and reasonably free from slag, dross and other harmful contaminations. The Castings prepared are free from harmful inclusions and cracks. High Tensile Brass Ingots are remelted for producing castings for Gas Valves, Fittings, Fasteners, Pump Trim, Gears, Locks, Heavy Duty Electrical Connectors, Transmission Components, Marine Hardware, Safety Tools & Decorative Metal Work. High Tensile Brass Castings are used extensively for wear resisting applications because of their strength. It is also used for marine propellers, pump impellers and valve bodies due to their high corrosion resistance. High tensile Brass is alloyed with aluminium, manganese & silicon which makes it as hard as aluminium bronze and renders easy to process characteristics and machinability. The material when analyzed in accordance with IS:3685-1966 shall have the chemical composition as follows: -
Constituent | Grade HTB-1 | Grade HTB-2 |
Copper Plus Incidental Nickel, Min | 55 | 55 |
Manganese, Max | 3.0 | 4.0 |
Aluminium | 0.5-2.5 | 3.0-6.0 |
Iron | 0.7-2.0 | 1.5-3.25 |
Tin, Max | 1.0 | 0.20 |
Lead, Max | 0.50 | 0.20 |
Silicon, Max | 0.10 | 0.10 |
Total of Other Elements, Max | 0.20 | 0.20 |
Zinc | Remainder | Remainder |
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T,
Packaging Details : Ingots are packed in Gunny Bags & Loaded Onto Containers For Ocean Freight While Only Packed In Jute Clothes For Safest Transportation By Road, Railways Or Air.
Delivery Time : As Per Order & Quantity of Manufacture
| Chemical Composition in Terms of Percentage with Values Given as Maximum Unless Otherwise Shown | ||||||||||||
Alloy Designation | Alloy Nomenclature | Cu | Mg | Si | Fe | Mn | Ni | Zn | Pb | Sn | Ti &/Or Nb | Others | Al |
2285 | Al-4% Cu Ni Mg Alloy | 3.5-4.5 | 1.2-1.8 | 0.60 | 0.60 | 0.60 | 1.8-2.3 | 0.10 | 0.05 | 0.05 | 0.25 | Si + Fe = 1.0 | Remainder |
2280 | Al-4.5% Cu Ti Alloy | 4.0-5.0 | 0.10 | 0.25 | 0.25 | 0.10 | 0.25 | 0.10 | 0.05 | 0.05 | 0.05-0.30 |
| Remainder |
2258 | Al-4.5% Cu Mg Ti Alloy | 4.0-5.0 | 0.15-0.35 | 0.30 | 0.30 | 0.10 | 0.03 |
|
|
| 0.17-0.35 |
| Remainder |
2838 | Al-5% Cu Ni Mn Sb Co Zr Alloy | 4.5-5.5 |
| 0.30 |
| 0.20-0.30 | 1.3-1.8 |
|
|
| 0.15-0.25 | Zr=0.10-0.30, Co=0.10-0.40, Sb: 0.10-0.40, Co + Sb: 0.60 | Remainder |
4128 | Al-2.5% Si Cu Fe Ni Mg Alloy | 0.80-2.0 | 0.05-0.20 | 1.5-2.8 | 0.80-1.4 | 0.10 | 0.80-1.7 | 0.10 | 0.05 | 0.05 | 0.25 |
| Remainder |
4223 | Al-5% Si Cu Mn Alloy | 2.0.4.0 | 0.15 | 4.0-6.0 | 0.80 | 0.30-0.70 | 0.30 | 0.50 | 0.1 | 0.05 | 0.20 |
| Remainder |
4320 | Al-6% Si Cu Alloy | 3.0-4.0 | 0.10 | 5.5-6.5 | 0.10 | 0.50 | 0.35 | 1.0 |
|
| 0.25 | 0.50 Others Total | Remainder |
4458 | Al-7% Si Mg Alloy | 0.10 | 0.20-0.45 | 6.5-7.5 | 0.20 | 0.10 |
| 0.10 | 0.10 | 0.05 | 0.20 |
| Remainder |
4425 | Al-7.8% Si Cu Alloy | 1.0-2.0 | 0.20-0.60 | 7.0-8.6 | 1.00 | 0.20-0.60 | 0.25 | 1.5 |
|
| 0.25 | 0.50 Others Total, Cr 0.35 | Remainder |
4420 | Al-3.5% Si Cu Alloy | 3.0-4.0 | 0.10 | 3.5-9.5 | 1.3 | 0.50 | 0.50 | 1.0 |
| 0.30 |
| 0.50 Others Total | Remainder |
4585 | Al-9% Si Mg Co Alloy | 0.10 | 0.17-0.25 | 8.8-9.7 | 0.60 | 0.03 |
|
|
|
|
| Co: 0.35-0.55, Others Total: 0.20 | Remainder |
4535 | Al-9.5% Si Mg Mn Alloy | 0.10 | 0.17-0.35 | 8.9-10.1 | 0.65 | 0.25-0.50 | 0.03 |
|
|
|
| Co: 0.20, Others Total: 0.20 | Remainder |
4600 | Al-11.5% Si Alloy | 0.10 | 0.10 | 10.0-13.0 | 0.60 | 0.50 | 0.10 | 0.10 | 0.10 | 0.05 |
|
| Remainder |
4635 | Al-11.5% Si Mg Mn Alloy | 0.10 | 0.20-0.60 | 10.0-13.0 | 0.60 | 0.30-0.70 | 0.10 | 0.10 | 0.10 | 0.05 | 0.20 |
| Remainder |
4700 | Al-13% Si Alloy | 0.10 | 0.10 | 12.0-13.7 | 0.75 | 0.10 | 0.03 |
|
|
|
| Co: 0.20, Others Total 0.20 | Remainder |
5200 | Al-4% Mg Alloy | 0.15 | 3.5-4.5 | 0.35 | 0.50 | 0.35 | 0.10 | 0.15 |
|
| 0.25 | 0.15, Each 0.05 | Remainder |
5438 | Al-7.7% Mg Zn Alloy | 0.20 | 7.4-7.0 | 0.25 | 0.35 | 0.1-0.3 | 0.10 | 0.9-1.4 | 0.05 | 0.05 | 0.25 |
| Remainder |
5500 | Al-10% Mg Alloy | 0.10 | 9.5-11.0 | 0.25 | 0.35 | 0.10 | 0.10 | 0.10 | 0.05 | 0.05 | 0.20 |
| Remainder |
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T,
Packaging Details : They are packed in Gunny Bags and Enclosed in Wooden Crates.
Delivery Time : As Per Order & Quantity of Manufacture
LM Alloy Name | ISO | Cu | Mg | Si | Fe | Mn | Ni | Zn | Pb | Sn | Ti | Aluminium | Others |
LM 0 | Al 99.5 | 0.03 | 0.03 | 0.3 | 0.4 | 0.03 | 0.03 | 0.07 | 0.03 | 0.03 |
| Al 99.50 Min |
|
LM 2 | Al-Si10Cu2Fe | 0.7-2.5 | 0.3 | 9.0-11.5 | 1.0 | 0.5 | 0.5 | 2.0 | 0.3 | 0.2 | 0.2 |
| 0.5 |
LM 4 | Al-Si5Cu3 | 2.0-4.0 | 0.2 | 4.0-6.0 | 0.8 | 0.2-0.6 | 0.3 | 0.5 | 0.1 | 0.1 | 0.2 | Remainder | 0.2 |
LM 5 | Al-Mg5Sil AlMg6 | 0.1 | 3.0-6.0 | 0.3 | 0.6 | 0.3-0.7 | 0.1 | 0.1 | 0.05 | 0.05 | 0.2 | Remainder | 0.2 |
LM 6 | Al-Si12 Al- Si12Fe | 0.1 | 0.1 | 10.0-13.0 | 0.6 | 0.5 | 0.1 | 0.1 | 0.1 | 0.05 | 0.2 | Remainder | 0.2 |
LM 9 | Al-Si10Mg | 0.2 | 0.2-0.6 | 10.0-13.0 | 0.6 | 0.3-0.7 | 0.1 | 0.1 | 0.1 | 0.05 | 0.2 | Remainder |
|
LM 12 | AlCu10Si2Mg | 9.0-11.0 | 0.2-0.4 | 2.5 | 1.0 | 0.6 | 0.6 | 0.5 | 0.1 | 0.1 | 0.2 | Remainder | 0.2 |
LM 13 | Al-Si12Cu Al- Si12CuFe | 0.7-1.5 | 0.8-1.5 | 10.5-13.0 | 1.0 | 0.5 | 1.5 | 0.5 | 0.1 | 0.1 | 0.2 | Remainder |
|
LM 16 | Al-Si5Cu1Mg | 1.0-1.5 | 0.4-0.6 | 4.5-5.5 | 0.6 | 0.5 | 0.25 | 0.1 | 0.1 | 0.05 | 0.2 | Remainder |
|
LM 20 | Al-Si12Cu Al- Si12CuFe | 0.4 | 0.2 | 10.0-13.0 | 1.0 | 0.5 | 0.1 | 0.2 | 0.1 | 0.1 | 0.2 | Remainder |
|
LM 21 | Al-Si6Cu4 | 3.0-5.0 | 0.1-0.3 | 5.0-7.0 | 1.0 | 0.2-0.6 | 0.3 | 2.0 | 0.2 | 0.1 | 0.2 | Remainder |
|
LM 22 | Al-Si5Cu3 | 2.8-3.8 | 0.05 | 4.0-6.0 | 0.6 | 0.2-0.6 | 0.15 | 0.15 | 0.1 | 0.05 | 0.2 | Remainder |
|
LM 24 | Al-Si8Cu3Fe | 3.0-4.0 | 0.3 | 7.5-9.5 | 1.3 | 0.5 | 0.5 | 3.0 | 0.3 | 0.2 | 0.2 | Remainder |
|
LM 25 | Al-Si7Mg | 0.2 | 0.2-0.6 | 6.5-7.5 | 0.5 | 0.3 | 0.1 | 0.1 | 0.1 | 0.05 | 0.2 | Remainder |
|
LM 26 | Al-Si9Cu3Mg | 2.0-4.0 | 0.5-1.5 | 8.5-10.5 | 1.2 | 0.5 | 1.0 | 1.0 | 0.2 | 0.1 | 0.2 | Remainder |
|
LM 27 | Al- Si7Cu2Mn0.5 | 1.5-2.5 | 0.35 | 6.0-8.0 | 0.8 | 0.2-0.6 | 0.3 | 1.0 | 0.2 | 0.1 | 0.2 | Remainder |
|
LM 28 | Al- Si19CuMgNi | 1.3-1.8 | 0.8-1.5 | 17.0-20.0 | 0.7 | 0.6 | 0.8-1.5 | 0.2 | 0.1 | 0.1 | 0.2 | Remainder |
|
LM 29 | AlSi23CuMgNi | 0.8-1.3 | 0.8-1.3 | 22.0-25.0 | 0.7 | 0.6 | 0.8-1.3 | 0.2 | 0.1 | 0.1 | 0.2 | Remainder |
|
LM 30 | Al- Si17Cu4Mg | 4.0-5.0 | 0.4-0.7 | 16.0-18.0 | 1.1 | 0.3 | 0.1 | 0.2 | 0.1 | 0.1 | 0.2 | Remainder |
|
LM 31 | Al-Zn5 | 0.1 | 0.5-0.75 | 0.25 | 0.5 | 0.1 | 0.1 | 4.8-5.7 | 0.05 | 0.05 | 0.25 | Remainder | Cr: 0.4-0.6, Each Other Element: 0.05, Total of Other Elements: 0.15. |
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T,
Packaging Details : They are packed in Polymer Sacks or In Jute Cloth & Enclosed In Wooden Crates. They are hence loaded onto containers for shipping.
Delivery Time : As Per Order & Quantity of Manufacture
Sl. No. | Designation | Copper | Silicon | Magnesium | Iron | Manganese | Nickel | Zinc | Lead | Tin | Titanium | Aluminium |
1 | 1900 | 0.2 | 0.5 | 0.05 | 0.6 | 0.2 | 0.1 | 0.1 | 0.05 | 0.05 | ----------- | 99.0 Min |
2 | 1950 | 0.03 | 0.3 | 0.03 | 0.4 | 0.03 | 0.03 | 0.07 | 0.03 | 0.03 | ----------- | 99.5 Min |
3 | 2280 | 4.0-5.0 | 0.25 | 0.1 | 0.25 | 0.1 | 0.1 | 0.1 | 0.05 | 0.05 | 0.2-0.3 | Remainder |
4 | 2285 | 3.5-4.5 | 0.7 | 1.2-1.8 | 0.7 | 0.6 | 1.7-2.3 | 0.1 | 0.05 | 0.05 | 0.2 | Remainder |
5 | 2550 | 9.0-11.0 | 2.5 | 0.2-0.4 | 1.0 | 0.6 | 0.5 | 0.8 | 0.1 | 0.1 | 0.2 | Remainder |
6 | 4223 | 2.0-4.0 | 4.0-6.0 | 0.05 | 0.6 | 0.2-0.6 | 0.3 | 0.5 | 0.1 | 0.1 | 0.2 | Remainder |
7 | 4223A | 2.8-3.8 | 4.0-6.0 | 0.05 | 0.6 | 0.2-0.6 | 0.2 | 40.15 | 0.1 | 0.05 | 0.2 | Remainder |
8 | 4225 | 1.0-1.5 | 4.5-6.0 | 0.3-0.6 | 0.8 | 0.5 | 0.3 | 0.5 | 0.2 | 0.1 | 0.2 | Remainder |
9 | 4300 | 0.1 | 4.5-6.0 | 0.1 | 0.6 | 0.5 | 0.1 | 0.1 | 0.1 | 0.05 | 0.2 | Remainder |
10 | 4323 | 3.0-5.0 | 5.0-7.0 | 0.1-0.3 | 1.0 | 0.2-0.6 | 0.3 | 2.0 | 0.2 | 0.1 | 0.2 | Remainder |
11 | 4420 | 3.0-4.0 | 7.5-9.5 | 0.3 | 1.3 | 0.5 | 0.5 | 3.0 | 0.3 | 0.2 | 0.2 | Remainder |
12 | 4423 | 1.5-2.5 | 6.0-8.0 | 0.3 | 0.8 | 0.2-0.6 | 0.3 | 1.0 | 0.2 | 0.1 | 0.2 | Remainder |
13 | 4450 | 0.1 | 6.5-7.5 | 0.20-0.45 | 0.5 | 0.3 | 0.1 | 0.1 | 0.1 | 0.05 | 0.2 | Remainder |
14 | 4520 | 0.7-2.5 | 9.0-11.5 | 0.3 | 1.0 | 0.5 | 0.5 | 2.0 | 0.3 | 0.2 | 0.2 | Remainder |
15 | 4525 | 2.0-4.0 | 8.5-10.5 | 0.5-1.5 | 1.2 | 0.5 | 1.0 | 1.0 | 0.2 | 0.1 | 0.2 | Remainder |
16 | 4528 | 1.75-2.5 | 8.5-9.5 | 0.15 | 0.4-0.6 | 0.8 | 0.8 | 0.5 | 0.1 | 0.1 | 0.2 | Remainder |
17 | 4600 | 0.1 | 10.0-13.0 | 0.1 | 0.6 | 0.5 | 0.1 | 0.1 | 0.1 | 0.05 | 0.2 | Remainder |
18 | 4600A | 0.4 | 10.0-13.0 | 0.2 | 1.0 | 0.5 | 0.1 | 0.2 | 0.1 | 0.1 | 0.2 | Remainder |
19 | 4628 | 1.75-2.5 | 11.0-12.5 | 0.3 | 0.7-1.1 | 0.5 | 0.3 | 1.5 | 0.05 | 0.1 | 0.2 | Remainder |
20 | 4635 | 0.1 | 10.0-13.0 | 0.2-0.6 | 0.6 | 0.3-0.7 | 0.1 | 0.1 | 0.1 | 0.05 | 0.2 | Remainder |
21 | 4652 | 0.7-1.5 | 10.0-12.0 | 0.8-1.5 | 1.0 | 0.5 | 0.7-1.5 | 0.5 | 0.1 | 0.1 | 0.2 | Remainder |
22 | 5230 | 0.1 | 0.3 | 3.0-6.0 | 0.6 | 0.3-0.7 | 0.1 | 0.1 | 0.05 | 0.05 | 0.2 | Remainder |
23 | 5500 | 0.1 | 0.25 | 9.5-11.0 | 0.4 | 0.1 | 0.1 | 0.1 | 0.05 | 0.05 | 0.2 | Remainder |
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T,
Packaging Details : They are Light Weight Castings & so are packed with care to avoid damage due to heavy loads. They are generally packed & put in Wooden Crates, Boxes & Loaded On To Containers. Ingots are loaded loose onto containers.
Delivery Time : As Per Order & Quantity of Manufacture
In Our Foundry, we are stocking Antimony Ingots of various Origins. They may be indegenious or Imported from Outside. Antimony Ingots available with us are classified as per IS:211-1992 into 3 separate grades with varying purity of Antimony. Antimony Ingots are required for Alloying with Copper, Tin, Lead, Zinc to manuacture castings where we are specialized in. Antimony Ingots are alloyed with Lead for making batteries, tank linings, ammunition & bearings. Antimony as a compound finds use in Ceramics, Rubber, Glass & Paint Industry. They are also used as a catalytic agent in the production of PET Products. The chemical composition of the 3 grades of Antimony Ingots are: -
Constituent | Percentage Composition | ||
| Grade Sb 99.8 | Grade Sb 99.5 | Grade Sb 99 |
Antimony, Min (By Difference) | 99.80 | 99.50 | 99.00 |
Lead, Max | 0.15 | 0.20 | 0.50 |
Arsenic, Max | 0.05 | 0.10 | 0.30 |
Iron, Max | 0.05 | 0.10 | 0.20 |
Sulphur, Max | 0.10 | 0.15 | 0.25 |
Copper, Max | 0.05 | 0.10 | 0.10 |
Bismuth, Max | 0.05 | 0.10 | 0.10 |
Nickel, Max | 0.05 | 0.10 | 0.10 |
Tin, Max | 0.05 | 0.10 | 0.10 |
Silver, Max | 0.05 | 0.10 | 0.10 |
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T,
Packaging Details : They are packed in Jute Cloth gunny bags & Sealed Before Dispatch By Road. For Export, Materials are packed in Jute Cloth & Marked Before Being Loaded Into Containers for shipping.
Delivery Time : As Per Order & Quantity of Manufacture
Zinc Ingot is a white or grey colour pure Zinc Metal which is cast into a block and bar that is suitable for furthur processing of metal. The Zinc Ingot is produced using solid state crystallization and ultra high purification processes including sublimation. It has various properties such as high malleability, low maintainence, durable finish standard, free from impurities & high strength. The Zinc Ingots formed have hardwearing material strength and offers resistance to rust. It finds application in the hot dip galvanizing steel, electrolytic galvanizing, photoengraving plates, zinc oxide, zinc plates, sacrificial anodes & Zinc ball.
In our Foundry, we are stocking Zinc Ingots for reselling purpose as wel as for our ouwn Foundry Consumption. We are offerring Good Prices for the Items on Demand. Zinc Ingots present with us are of 99.995 Percent Pure.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T,
Packaging Details : They are packed in Jute Cloth Gunny Bags & Loaded Into Containers For Shipment By Seas. For Transportation by Road, Railways Or Air, they are packed in similar fashion.
Delivery Time : As Per Order & Ready Stock Availability
Leaded Tin Bronze Alloys are cast as per IS:318-1981 Reaffirmed 2006 specification. This specification covers 6 Grades of Leaded Tin Bronze Alloys for Ingots & Castings. Castings done by us are Bushings, Rods, Flanges & Castings as per drawings & dimensions. The Ingots formed are of uniform quality and reasonably free from slag, dross and other harmful contaminations. The Castings formed are clean & free from harmful defects, blowholes, gas cavities etc. The chemical composition for the Five Grades is tabulated as under: -
Constituent | LTB -1 | LTB-2 | LTB-3 | LTB-4 | LTB-5 | LTB-6 |
Tin | 6.0-8.0 | 4.0-6.0 | 6.0-8.0 | 6.0-8.0 | 9.0-11.0 | 4.0-6.0 |
Zinc | 1.5-3.0 | 4.0-6.0 | 0.75 Max | 0.75 Max | 1.0 Max | 1.0 Max |
Lead | 2.5-3.5 | 4.0-6.0 | 9.0-11.0 | 14.0-16.0 | 8.5-11.0 | 18.0-23.0 |
Nickel | 2.0 Max | 2.0 Max | 2.0 Max | 2.0 Max | 2.0 Max | 2.0 Max |
Aluminium | 0.01 Max | 0.01 Max | 0.01 Max | ------- | 0.01 Max | ---------- |
Silicon | 0.01 Max | 0.02 Max | 0.02 Max | 0.02 Max | 0.02 Max | 0.01 Max |
Antimony | 0.3 Max | 0.4 Max | 0.5 Max | 0.5 Max | 0.5 Max | 0.5 Max |
Iron | 0.30 Max | 0.35 Max | 0.35 Max | 0.35 Max | 0.35 Max | 0.35 Max |
Total of all Impurities | 0.70 Max, (Excluding Nickel) | 0.80 Max, (Excluding Nickel) | 0.80 Max (Excluding Nickel + Zinc) | 0.80 Max, (Excluding Nickel + Zinc) | 0.80 Max (Excluding Nickel + Zinc) | 0.80 Max (Excluding Nickel + Zinc) |
Grade LTB 1 & LTB 2 are meant for general castings and have fair strength and good machining properties. They are used in Valve fittings & pump castings. Grade LTB 3 is suitable for High speed & heavy pressure bearings. Grade LTB 4 is used for General Castings in moderate pressure applications and general-purpose bearing metal. Grade LTB 5 is used for hard or moderately hard shafts with loads and speeds moderate or low with rather less adequate lubrication and alignment. Grade LTB 6 is used for bearing under light loads and high Speeds.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T,
Packaging Details : They are packed in Jute Clothes & Loaded On To Containers. They are even loaded and arranged to stay properly and safe during Road Transportation.
Delivery Time : As Per Order & Quantity of Manufacture
Aluminium Bronze Ingots & Castings manufactured by us are covered under the specification IS:305-1981 Or Reaffirmed 2006. Aluminium Bronze Ingots cast are of uniform quality and reasonably free from slag, dross and otherharmful contaminations. They are remelted for producing industrial castings. Castings of Aluminium Bronze are madefree from harmful inclusions and cracks. The ingots cast are generally 10Kg to 12 Kg Per Piece. The Castings areprepared as per dimensions and in accordance with the drawings. Aluminium Bronze Castings are used in marinehardware, shafts & pump and valve components for handling sea water, sour mine waters, nonoxidizing acids &industrial process fluids. They area also used in applications such as heavy-duty sleeve bearings and machine tool ways.Aluminium Bronze Ingots & Castings are cast as per 2 grades namely AB-1 & AB -2. The chemical compositions of the 2 grades of the alloy are tabulated below: -
Constituent | Grade AB -1 | Grade AB – 2 |
Aluminium | 8.5 – 10.5 | 8.8-10.0 |
Iron | 1.5-3.5 | 4.0-5.5 |
Manganese | 1.0 Max | 1.5 Max |
Nickel | 1.0 Max | 4.0-5.5 |
Zinc | 0.50 Max | 0.50 Max |
Tin | 0.10 Max | 0.1 Max |
Lead | 0.05 Max | 0.05 Max |
Silicon | 0.25 Max | 0.10 Max |
Magnesium | 0.05 Max | 0.05 Max |
Total of Sn, Pb, Si & Mg | 0.30 Max | 0.30 Max |
Copper | Remainder | Remainder |
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T,
Packaging Details : They are packed in Gunny Bags & Enclosed In Wooden Crates & Cartoons after which they are Loaded Onto Containers, Carrier Vessels for Shipment By Road, Railways & Seas.
Delivery Time : As Per Order & Quantity of Manufacture
Magnesium is a shiny grey metal having a low density, low melting point & high chemical reactivity. Like other alkaline earth metals, it occurs in combination with other elements. It almost has an oxidation state of +2. It reacts readily with air to form a thin magnesium coating of magnesium oxide that inhibits furthur coating of the material. The free metal burns with a bright white light. The metal is obtained mainly by electrolysis of magnesium salts obtained from Brine. It is less dense than Aluminium and is used primarily as a component in strong and lightweight alloys that contain aluminium. Magnesium is used in refining metals such as Zirconium & Hafnium. High Purity of magnesium is required for High Quality Refining. Alloys of magnesium have been used in various products including airplanes & performance cars. Magnesium Ingots are used in the production of magnesium alloys as well as for use in Chemical Industrial, military industrial, meter-instrument manufacture, etc.
In Our Foundry, we are stocking Magnesium for our own consumption as well as for reselling. We are offering Magnesium Ingots at fair prices to our customers who not only come to us from within the state but throughout India.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T,
Packaging Details : They are packed in Polymer Clothes & Jute Clothes Before Being Loaded In To Containers For Shipping & Onto Vehicles For Transportation By Road. Care is taken such that Magnesium is not exposed to heat and acidic air which might lead to its loss during transportation, since Magnesium is highly reactive to chemicals & high temperatures.
Delivery Time : As Per Order Quantity & Availabilitty of Stock
Copper Manganese Ingots are alloys of Copper with 30 Percent Manganese. They are categorized under the Specification of Copper Master Alloys which is IS:5743-1970 Or Further Amendments. This alloy designated as Cu Mn 30 are produced in the form of Ingots which are recognized for their quality & reliability. The Ingots produced are applied for improving the mechanical properties and corrosion resistance of lower graded alloys of Copper and in enhancing the mechanical properties of corrosion resistance of Brass Alloys. This alloy is used as an De-Oxidizer, a desulpharizer for Copper Nickel Alloys and Copper Nickel Zinc Alloys and for influencing the electrical conductivity and magnetic properties of Aluminium Bronze.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T,
Packaging Details : They are packed in Jute Clothes & Placed Inside Wooden Crates Before Being Loaded On To Containers For Shipping & Vehicles for transportation by Road.
Delivery Time : As Per Order & Quantity of Manufacture
Besides being a manufacturer, we are stocking Cadmium Sticks To Electrolytic Grades which we are supplying to Buyers at competitive prices. Sticks come in various sizes as weight as per Brands. Cadmium Stciks are have Low Melting Points and find uses in the control of Nuclear Fission as well as Electroplating & Soldering. They are also used in Batteries which make use of Nickel-Cadmium Alloys.
We are manufacturing a range of Silicon Bronze Alloys Ingots. They are tabulated in the following table: -
Copper Alloys | Standard | Cu | Sn | Pb | Zn | Fe | Ni | P | Al | Mn | Si | Sb | S |
C63400 | ASTM | Remainder | 0.2 | 0.05 | 0.5 | 0.15 | 0.15 |
| 2.6-3.2 |
| 0.25- 0.45 |
|
|
C63600 | ASTM | Remainder | 0.2 | 0.05 | 0.5 | 0.15 | 0.15 |
| 3.0-4.0 |
| 0.7-1.3 |
|
|
C63800 | ASTM | Remainder |
| 0.05 | 0.8 | 0.2 | 0.2 |
| 2.5-3.1 | 0.1 | 1.5-2.1 |
|
|
C64200 | ASTM | Remainder | 0.2 | 0.05 | 0.5 | 0.3 | 0.25 |
| 6.3-7.8 | 0.1 | 1.5-2.2 |
|
|
C64210 | ASTM | Remainder | 0.2 | 0.05 | 0.5 | 0.3 | 0.25 |
| 6.3-7.0 | 0.1 | 1.5-2.0 |
|
|
C87300 | ASTM | 94.00----- |
| 0.2 | 0.25 | 0.2 |
|
|
| 0.8-1.5 | 3.5-4.5 |
|
|
C95600 | ASTM | 88.00----- |
|
|
|
| 0.25 |
| 6.0-8.0 |
| 1.8-3.2 |
|
|
C94700 | ASTM | 85.00-90.00 | 4.5-6.0 | 0.1 | 1.0-2.5 | 0.25 | 4.5-6.0 | 0.05 | 0.005 | 0.2 | 0.005 | 0.15 | 0.05 |
C94800 | ASTM | 84.00-89.00 | 4.5-6.0 | 0.3-1.0 | 1.0-2.5 | 0.3 | 4.5-6.0 | 0.05 | 0.005 | 0.2 | 0.005 | 0.15 | 0.05 |
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T,
Packaging Details : They are packed in Jute Cloth Gunny Bags Or Poly Gunny Sacks after which they are loaded onto containers, cartoons for export purposes. They are loaded onto vehicles for transportation by Road.
Delivery Time : As Per Order & Quantity of Manufacture
Phosphorous Bronze Split Bushes are cast as per IS:28-1985 Specification. They are required as Cam Wheel Split Bush & Bush for Journal Bearings. Split Bronze Bearings are required in multiple industrial applications. They aid in absorption of shock, reduction of vibration and noise. The split bushing design could eliminate the need for additional lubrication methods as well as reduce the amount of maintainence needed for optimal operation. Split Bushings are also used where a 2 piece housing is present or where quick assembly and easy installation is required. There are 3 types of split bushings namely perfect halved bushings, matched halved bushings and bushings that are split after machining. Perfect halved split bushings will yield 2 halves of the exact same size. These halves will also match with any other halves manufactured under the same specification. With perfect half split bushings, the halves are interchangeable with any of the other same size halves. Matched halved bushings will match with the corresponding opposite half that had been manufactured with it. Split after machining are the most economical of the 3 types. The material requirement for these parts are the same as non split bushings where the only extra effort lies in the added operation of cutting. The matched and perfect halved bushings start with a larger stock size than what would be used for a split after machining bushing. The bar stock is cut before machining after which they are welded together. The larger beginning stock size will make up for the size loss during the cutting stage. After welding the 2 stock bar halves are machined to finished dimensions. The 2 halves are then separated. This leaves us with 2 halves that will comoplete a 360 Degree Circle. Perfect halved bushings are the least economical and generally are only specified where the split line is critical to the application. They are manufactured in a similar fashion as the matched halves but special attention is paid to make sure that each half is split at the exact centerline and at the same angle as all the other pairs. The process results in halves which are interchangeable amonst one another.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T,
Packaging Details : They are well packed in Gunny Bags to ensure damage during transportation. The materials are placed in wooden crates for safety.
Delivery Time : As Per Order & Quantity to be supplied
Phosphorous Bronze Rods are manufactured by us for Five Different Grades of IS:28-1985 Or Latest Specifications. Phosphorouos Bronze contains of Copper alloyed with Tin, Phosphorous, Zinc & Lead. Rods manufactured by us range from Diameter of 20mm to 300mm & Length of Up to 500mm. The Rods Contain Optimum Chemical & Mechanical Properties to be used for Industrial Purposes and electrical applications. The Rods are often used for manufacturing wires and bars by continuous casting, extrusions/hard drawn processes in Industries. The Rods manufactured have Good Electrical Conductivity, Excellent Resistance to Corrosion & Fatigue, Excellent Strength and performance, fine grain structure and excellent elasticity. The Rods are annealed to impart optimum physical properties.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : They are packed in gunny bags & encased in Wooden Crates, Cartoons & Containers. They are often Packed in Polypropylene Bags with High Strength.
Delivery Time : As Per Order & Quantity of Manufacture
White Metals/ Antifriction Bearing Alloys Ingots & Castings are cast as per IS:25-1979 Reaffirmed 2003 Specification. White Metals are cast as per 10 Grades of Anti Friction Bearing Alloys. The ingots manufactured are homogeneous and free from nonmetallic inclusions and have a clean appearance and fine grain structure. White Metal alloys are used for lining of petrol & diesel engine bearing crossheads in steam engine and other bearings used at high speeds. They are used for repair jobs in mills and marine installations, for underwater applications as a bearing alloy and gland packings, for lining of bearings required for medium speeds such as centrifugal pumps, circular saws, converters, dynamos and electrical motors, for low-speed bearings such as pulp crushers, concrete mixers and rope conveyors. They are again used for heavy duty bearings, rolling mill bearing in sugar, rubber, paper, steel industries, bearings for diesel engines, crossheads in steel engines, turbines etc. They are used for mill shaftings, railway carriage & wagon bearings and as a thin line overlay on steel strips where the white metal lining material is 0.076mm thick. The 10 grades of Anti Friction bearing alloys with chemical compositions are tabulated below: -
Grade | Alloying Elements, Percent
| Impurities, Percent, Max | Total of Indicated Impurities, Percent, Max | |||||||||||||
| Sn | Sb | Pb | Cu | Ni | Cd | As | Zn | Fe | As | Al | Bi | Zn | Cd |
| |
90 | 90 Min | 6.5-7.5 | 0.3 Max | 2.5-3.5 | ----- | ---- | --- | ------ | 0.08 | 0.10 | 0.005 | 0.05 | 0.008 | 0.05 | 0.15 | |
84 | 84 Min | 9.0-11.0 | 0.3 Max | 5.0-6.0 | ----- | ---- | --- | ------ | 0.08 | 0.10 | 0.005 | 0.05 | 0.008 | 0.10 | 0.17 | |
75 | 74.0-76.0 | 10.0-12.0 | Remainder | 2.75-3.25 | ----- | ---- | --- | ------ | 0.08 | 0.10 | 0.005 | 0.05 | 0.008 | 0.10 | 0.17 | |
69 | 68.0-70.0 | 0.2 Max | 0.3 Max | 1.0-1.4 | ----- | ---- | --- | 29.0-31.0 | 0.10 | 0.15 | 0.005 | 0.08 | ------- | 0.10 | 0.22 | |
60 | 59.0-61.0 | 11.0-12.0 | Remainder | 2.5-3.5 | ----- | ---- | --- | ------ | 0.10 | 0.15 | 0.005 | 0.08 | 0.01 | 0.10 | 0.22 | |
20 | 19.0-21.0 | 14.0-16.0 | Remainder | 1.25-1.75 | ----- | ---- | --- | ------ | 0.10 | 0.20 | 0.005 | 0.10 | 0.01 | 0.10 | 0.26 | |
10 | 9.0-11.0 | 13.0-15.0 | Remainder | 0.50-1.0 | ----- | ---- | --- | ------ | 0.10 | 0.20 | 0.005 | 0.10 | 0.01 | 0.10 | 0.28 | |
6 | 5.0-7.0 | 14.0-16.0 | Remainder | 0.80-1.20 | 0.80-1.50 | 0.70-1.50 | 0.30-0.80 | ------- | 0.10 | ------ | 0.05 | 0.10 | 0.05 | ------ | 0.15 | |
5 | 4.5-5.5 | 14.0-16.0 | Remainder | 0.30-0.70 | ------- | ------- | ------- | ------- | 0.10 | 0.25 | 0.005 | 0.10 | 0.01 | 0.10 | 0.28 | |
1 | 0.75-1.25 | 15.0-16.0 | Remainder | 0.5 Max | ------- | ------- | 0.8-1.1 | ------- | 0.10 | ------ | 0.005 | 0.10 | 0.01 | 0.10 | 0.28 |
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T,
Packaging Details : They are packed in Polypropylene Bags Or Gunny Bags & Enclosed in Wooden Crates & Loaded Onto Containers.
Delivery Time : As Per Order & Quantity of Requirement
Brass Ingots & Castings are manufactured as per IS:292-1983 Reaffirmed 2004 Standard Specifications. This standard covers the requirements of 2 Grades of Leaded Brass Ingots & Castings which are designated as LCB 1 & LCB 2. The Brass Ingots cast are of uniform quality and reasonably free from slag, dross and other harmful contaminations. The Castings prepared are made clean, free from harmful defects such as blow holes and gas cavities. They have different mechanical and electrical properties depending on their Zinc Content which vary from 5% - 45%. Brass Ingots are used for remelting for producing castings that have varied applications. They are used in Decorative applications, in architectural hardware like doorknobs and handrails. They are used for making musical instruments, nuts, bolts and threaded parts, terminals, jets, Taps and Injectors. In our Foundry, we are chiefly manufacturing Brass Rods, Brass Hollow Casting & Castings involving Chill Die Casting & Sand Casting as per drawings and specifications.
| Designation LCB -1 | Designation LCB-2 | ||
Constituent | Ingots | Castings | Ingots | Castings |
Copper Plus Incidental Nickel | 70.0 - 77.0 | 70.0 – 80.0 | 63.0 - 67.0 | 63.0 – 70.0 |
Lead | 2.0 – 5.0 | 2.0 – 5.0 | 1.0 – 3.0 | 1.0 – 3.0 |
Tin | 1.0 – 3.0 | 1.0 – 3.0 | 1.50 Max | 1.50 Max |
Iron, Max | 0.50 | 0.75 | 0.50 | 0.75 |
Aluminium | 0.01 | 0.01 | 0.01 | 0.01 |
Zinc | Remainder | Remainder | Remainder | Remainder |
Gun Metal Ingots Manufactured By Us are as tabulated below: -
Copper Alloys | Standard | Cu | Sn | Pb | Zn | Fe | Ni | P | Al | Mn | Si | Sb | S | Bi | Impurities |
LTB-1 | IS 318-1981 | Remainder | 6.0-8.0 | 2.5-3.5 | 1.5-3.0 | 0.3 | 2.0 |
| 0.01 |
| 0.01 | 0.3 |
|
| 0.7 |
LTB-2 | IS 318-1981 | Remainder | 4.0-6.0 | 4.0-6.0 | 4.0-6.0 | 0.35 | 2.0 |
| 0.01 |
| 0.02 | 0.4 |
|
| 0.8 |
LG-1 | BS:1400-1985 | Remainder | 2.0-3.5 | 4.0-6.0 | 7.0-9.5 | 0.5 | 2.0 | 0.03 | 0.01 |
| 0.02 | 0.3 | 0.1 | 0.1 | 1.0 |
LG-2 | BS:1400-1985 | Remainder | 4.0-6.0 | 4.0-6.0 | 4.0-6.0 | 0.5 | 2.0 |
| 0.01 |
| 0.02 |
|
| 0.05 | 0.8 |
LG-4 | BS:1400-1985 | Remainder | 6.0-8.05 | 2.5-3.5 | 1.5-3.0 | 0.2 | 2.0 |
| 0.01 |
| 0.01 | 0.25 |
| 0.05 | 0.7 |
BC-1 | JIS | 79.0-89.0 | 2.0-4.0 | 3.0-7.0 | 8.0-12.0 | 0.35 | 1.0 | 0.05 | 0.01 |
| 0.01 | 0.2 |
|
|
|
BC-6 | JIS | 83.0-87.0 | 4.0-6.0 | 4.0-6.0 | 4.0-6.0 | 0.3 | 1.0 | 0.05 | 0.01 |
| 0.01 | 0.2 |
|
|
|
BC-7 | JIS | 86.0-90.0 | 5.0-7.0 | 1.0-3.0 | 3.0-5.0 | 0.2 | 1.0 | 0.05 | 0.01 |
| 0.01 | 0.2 |
|
|
|
G-CuSn5Znpb | DIN | 83.5-86.0 | 4.3-6.0 | 4.0-6.0 | 4.5-6.5 | 0.2 | 2.0-3.0 | 0.03 | 0.01 | 0.1 | 0.01 | 0.25 | 0.6 |
|
|
RG-5 | DIN | 84.0-86.0 | 4.0-6.0 | 4.0-6.0 | 4.0-6.0 | 0.2 | 2.0 | 0.03 | 0.01 | 0.1 | 0.01 | 0.25 | 0.6 |
|
|
RG-7 | DIN | 81.0-85.0 | 6.0-8.0 | 5.0-8.0 | 2.0-5.0 | 0.20 | 2.0 | 0.10 | 0.01 |
| 0.01 | 0.30 | 0.10 |
|
|
RG-10 | DIN | 86.0-89.0 | 9.0-11.0 | 1.5 | 1.0-3.0 | 0.25 | 2.0 | 0.1 |
|
|
| 0.30 | 0.05 |
|
|
C83600 | ASTM | 84.0-86.0 | 4.3-6.0 | 4.0-5.7 | 4.3-6.0 | 0.25 | 1.0 | 0.05 | 0.005 |
| 0.005 | 0.25 | 0.08 |
|
|
C84400 | ASTM | 79.0-82.0 | 2.5-3.5 | 6.0-8.0 | 7.0-10.0 | 0.4 | 0.8 | 0.02 | 0.005 |
| 0.005 | 0.25 | 0.08 |
|
|
C54400 | ASTM | Remainder | 3.5-4.5 | 3.5-4.5 | 1.5-4.5 | 0.1 |
| 0.01-0.5 |
|
|
|
|
|
|
|
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T,
Packaging Details : They are Packed in Jute Clothes & Gunny Sacs and sealed after which they are loaded onto vehicles for shipping by Road, Air, Railways Or Sea.
Delivery Time : As Per Order & Quantity of Manufacture
We are casting Copper Nickel Ingots in our Foundry. Copper Nickel Alloys Ingots come in 2 no.s of Grades namely CuNi30 & CuNi10. Copper Nickel Alloys Ingots are used for remelting to form products that are used in Sea Water Piping, heat exchangers & condensers. The Produts are used in Sea Water Cooling & Fire Water Systems, Heat Exchangers, condensers & piping, platform risers & leg sheathing, boat hulls, oil coolers, hydraulic tubing, antimicrobial surfaces, forgings, cast sea water pumps and valve components. They are also used as shafts and bearing bushes, bolting, pump and valve trim, gears, fastners. Again they are used in Bearing & Drill Components, Subsea Connectors, valve actuator stems, lifting nuts, ROV Lock on devices, seawater pump components, etc.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T,
Packaging Details : They are packed in Jute Cloth Gunny Sacks or Polymer Sacks after which they are either loaded into containers for export purposes or loaded onto vehicles for transportation by Road.
Delivery Time : As Per Order & Quantity of Manufacture
Phosphorous Bronze Ingots cast as per IS:1458-1985 Reaffirmed 2006, Class -1, IS:28-1985 Or Latest Specifications having Grade -1, Grade -2, Grade – 3, Grade – 4, Grade – 5. Chemically they represent the following compositions as follows: -
Constituent | IS:1458-1985 Reaffirmed 2006 | Constituent | IS:28-1985 Or Latest Specifications | ||||
| Class 1 |
| Grade 1 | Grade 2 | Grade 3 | Grade 4 | Grade 5 |
Tin | 6.0 – 8.0 | Tin | 6.0 – 8.0 | 10.0 Min | 6.5 – 8.5 | 9.0 – 11.0 | 11.0 – 13.1 |
Lead | 0.5 Max | Phosphorous | 0.30 – 0.50 | 0.50 Min | 0.30 Min | 0.15 Max | 0.15 Min |
Zinc | 0.5 Max | Lead | 0.25 Max | 0.25 Max | 2.0 – 5.0 | 0.25 Max | 0.50 Max |
Phosphorous | 0.4- 0.6 | Zinc | 0.50 Max | 0.05 Max | 2.0 Max. | 0.05 Max | 0.30 Max |
Iron | 0.3 Max | Nickel | 0.70 Max | 0.10 Max | 1.0 Max | 0.25 Max | 0.50 Max |
Antimony | 0.1 Max | Iron | 0.30 Max | 0.10 Max |
|
| 0.15 Max |
Iron & Antimony |
| Aluminium | 0.01 Max | 0.01 Max |
|
| 0.01 Max |
Aluminium | 0.01 Max | Antimony | 0.10 Max |
|
|
|
|
Total of Other Elements including Iron & Antimony | 0.6 Max | Silicon | 0.02 Max | 0.02 Max |
|
| 0.02 Max |
Total Impurities | 1.20 Max | 0.60 Max | 0.50 Max | 0.80 Max | 0.20 Max | ||
Copper Plus Incidental Nickel | Remainder | Copper | Remainder | Remainder | Remainder | Remainder | Remainder |
Additional Information:
Payment Terms : L/C, T/T,
Packaging Details : They are packed in Gunny Bags with Seal and placed inside Wooden Cartoons Or Loaded In Containers.
Delivery Time : As Per Order
We are manufacturing Phosphorous Bronze Flanges & Flanged Bushes as per IS:28-1985 Or Latest Specifications. Stores are manufactured as per Grade 1, Grade 2, Grade 3, Grade 4, Grade 5. The castings are prepared as per quality and drawings and even customised to meet increasing market demands. Phosphorous is an alloy which has good machinability and excellent strength for bearing heavy workloads. Our Firm is chief engineered by Phosphorous Bronze Castings Of which Flanges meet 70% of demands from our Customers. They are used in applications involving sleeve bearings, thrust washers and cam followers.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T,
Packaging Details : They are packed in Gunny Bags Or Packed Loose and Loaded Into Vehicle. They are often packed in Wooden Crates, Containers & Cartoons and fumigated for their safety during transportation for export.
Delivery Time : As per Order & Its Quantity
White Metal Alloys have low friction and wearing properties making them ideal for use in machinery were smooth and reliable operation is critical. They have strong inertness and extreme hardness applied in service severe conditions excellent strength and high operating temperatures. White Metals are a family of alloys that contain Tin, Antimony and Copper along with other elements like Lead & Arsenic. They are commonly used in large machinery applications such as turbines and generators. Babbitt Metal contains Tin, Antimony & Copper with smaller amounts of elements such as Lead & Zinc. Babbitt Metal is commonly used in high speed & heavy load bearing applications such as automotive engines and heavy machinery. The special grades of white metals are tabulated for their properties are as follows: -
Product Name | Product Description |
ASTM B23 Grade 1 Babbitt Alloy | Chemical Composition: Tin: 90-92%, Lead: .35% max, Antimony: 4.0-5.0%, Copper: 4.0-5.0% Tin Based Babbitt that is slightly softer than Grade 2 Babbitt. For applications requiring high speed but less pressure. |
Babbitt Alloy #1 | Chemical Composition: Tin: 90-92%, Lead: .0004% max, Antimony: 4.0-5.0%, Copper: 4.0-5.0% A Special High Purity Lead Free Tin Based babbitt that can be used for bearings found in commercial ovens, material pumps and transport equipment used for handling food grade materials. |
ASTM B23 Grade 2 (GEN) Genuine Babbitt | Chemical Composition: Tin: 88-90%, Lead: .35% max, Antimony: 4.7-8.0%, Copper: 3.0-4.0%. It is used for high speed and low-pressure applications. Ideal for repairing older airplane, automobile, boat, tin based Babbitt and not Lead as a Babbitt and steel liner. They are good for old connecting rods, crank pins, compressors, cutters, centrifugal pumps, dynamos, bus and diesel train engines and railway car axle bearings that used a mill gearing, elevators, arbors, trimmers, steam cylinders, steam pumps, band saws, swing saws, and tube mills that turn at high speed. |
ASTM B23 Grade 3 Babbitt Alloy | Chemical Composition: Tin: 83-85%, Lead: .35% max, Antimony: 7.5-8.5%, Copper: 7.5-8.5%. Heavy Duty Tin Based Babbitt for High Speed, High Loads and High Shock applications. They are also used as general-purpose high-speed Babbitt for thin bearings of light running machinery with light to medium pressures such as compressors, electric motors, pumps and stationary engine parts. |
Engine Babbitt Alloy | Chemical Composition: Tin: 85.5-87.5%, Lead: .25% max, Antimony: 6.5-7.5%, Copper: 6.5-7.6%. This Babbitt Alloy is used for Ford Engines. |
ASTM B23 Grade 4 Babbitt Alloy | Chemical Composition: Tin: 80.5-82.5%, Lead: .25% max, Antimony: 12.0-14.0%, Copper: 5.0-6.0% Originally designed as a Thrust Washer Babbitt, this hardware grade Babbitt alloy is used for various non-critical low speed applications. It is customized to prepare it for specific applications requiring Grade # 4 Babbitt. |
ASTM B23 Grade 5 Babbitt Alloy | Chemical Composition: Tin: 61.0-63.0%, Lead: 24.0-26.0%, Antimony: 9.5-10.5%, Copper: 2.5-3.5% Customized for specific applications requiring Grade # 5 Babbitt. |
ASTM B23 Grade 6 Babbitt Alloy | Chemical Composition: Tin: 35-37%, Lead: 50-52%, Antimony: Copper: 0.5-1.5%. Customized for specific applications requiring Grade 6 Babbitt. |
ASTM B23 Grade 10 Babbitt Alloy | Chemical Composition: Tin: 9.3-10.7%%, Lead: 78.0-83.0%, Antimony: 14.5-17.5%, Copper: .6% Customized for specific applications requiring Grade 10 Babbitt. |
ASTM B23 Grade 13 Babbitt Alloy | Chemical Composition: Tin: 5.5-6.5%, Lead: 83-85%, Antimony: 9.5-10.5%, Copper: .5% Lead Based Babbitts Designed for Mill Anchor for Knife Blades. |
Babbitt Alloy Special Grade | Chemical Composition: Sn: Balance, Sb: 7% - 8%, Cu: 3% - 4%, Ni: 0.2% - 0.3%, Cd: 1% - 1.5%. |
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T,
Packaging Details : They are packed in Polypropylene Bags Or Gunny Bags & Packed In Wooden Crates In Uniform No. of Ingots In Each Crate after which they are loaded into containers for export purposes or onto vehicles for carriage by Road.
Delivery Time : As Per Order & Quantity of Manufacture