Product / Services
Post Buy Requirement
Rectifiers & Electronics Pvt Ltd
Rectifiers & Electronics Pvt Ltd
Delhi, India
gstGST : 07AAGCR4127A1ZT Verified Add Review
Call 08068051313 Ext. 873

Our Products

  1. Electric Fittings And Components 3 Products available
  2. Testing Equipment 17 Products available
  3. Testing Equipments 5 Products available
  4. Transformers 5 Products available
  5. Generators 3 Products available
  6. Measuring Instruments & Equipment 5 Products available
  7. Others 39 Products available

Other Products / Services #382697

high voltage rectifiers

High Voltage Rectifiers
Rectifiers & Electronics, Popularly known as 'RE', is the Pioneer Organization in the field of High voltage testing equipment such as ACDC High Voltage Test Sets and Other Electrical High Voltage Test Equipment in INDIA. In the last 33 YearsComplete In-house manufacturing facility
Quality products that are economically priced
Un-comparable after sales service
Complete In-house R&D facility
View Complete Details
Ask Latest Price & Details
Electrical Rectifiers

Electrical Rectifiers
AC High Voltage High capacity testers are specially designed for testing cables, Generators, transformers and other high capacitive equipments as per National and International Standards. During manufacturing each unit is tested at multiple stages, thus ensuring consistency and best quality. These instruments are air cooled, oil cooled or air & oil cooled combined as per design. The units have been manufactured up to 800kV and up to 3000kVA.The units have type of tests such as dry withstand, wet withstand, breakdown voltage in air/oil, oil insulation, and pollution Test.
View Complete Details
Ask Latest Price & Details
Double Voltage Double Frequency Test Set

Double Voltage Double Frequency Test Set
  • Maximum Capacity Up to 10MVA
  • Output Voltage 1000V up to 1mVA, 11kV up to 10MVA
Induced Over Voltage Test Set (DVDF) is used for testing the strength of insulation between turns and between other points of the transformers etc. as stipulated by BIS or other standard specification. For this test Double Voltage is applied across L.T. terminals for one minute, and to limit the magnetizing current over frequency is utilized. It is a mechanically coupled unit having motor and Generator with power and control panel to regulate the output voltage.A suitable control panel is utilized for motor starting, generator output control, measurement of all three phases, voltage and current for input and output with protection circuit.
View Complete Details
Ask Latest Price & Details
AC High Voltage Test Set - High Capacity

AC High Voltage Test Set - High Capacity

  • Feature Casted Wheel for easy movement, Multiple safety locks for the operator
AC High Voltage High capacity testers are specially designed for testing cables, Generators, transformers and other high capacitive equipments as per National and International Standards, thus ensuring consistency and best quality. These instruments are air cooled, oil cooled or air & oil cooled combined as per design. The units have been made up to 800kV and up to 3000kVA.The units have type of tests such as dry withstand, wet withstand, breakdown voltage in airoil, oil insulation, and pollution Test.
View Complete Details
Ask Latest Price & Details
high voltage equipment

High Voltage Equipment
High Voltage Test Sets for testing the underground cable, large Generator, Motor Transformer capacitor etcand various other applications. The unit consist of variac, transformer , rectifier, condenser, bleeder, filter etc. All the components are housed in sheet metal housing or specially designed fiber glass housing which are coated with anti tracking paints.
View Complete Details
Ask Latest Price & Details
DC High Voltage Test Set - Stationary

DC High Voltage Test Set - Stationary

  • Input Voltage 220/230V or 380/400, 50HZ / 60HZ AC Supply
  • Capacity Up to 1000mA
DC High Voltage Test Set is used for testing cables, generators and other electrical equipments as per National and International specifications. The unit consist of variac, transformer , rectifier, condenser, bleeder, filter etc. All the components are housed in sheet metal housing or specially designed fiber glass housing which are coated with anti tracking paints.
View Complete Details
Ask Latest Price & Details
DC High Voltage Test Set - Portable

DC High Voltage Test Set - Portable
  • Feature Easy to operate, Digital meters for easy readability.
Portable DC High Voltage Test Set is used for testing underground cable, generators, switchgear etc. for understanding the condition of current leakage insulation condition at any given point. These are extremely light weight units designed for field operation (Substation, Power Projects, Remote sites etc.). The units are delivered in custom made carry boxes to endure rough and rugged transportation.
View Complete Details
Ask Latest Price & Details
current injection test set

Current Injection Test Set

  • Min. Order (MOQ) 1 Set(s)
Primary Injection test sets are used to loading. Calibration and testing of CT's bimetals relays, Protection relays etc. Mostly Primary Injection Test set are designed as per customer's specification. The Primary Injections Test sets are of 15 minutes ON30 Minutes OFF duty i.e. testing duty only. Loading transformers are design for continuous use for Temperature Rise for bus ductBus Bar etc.
Optional accessories requirement may include cable termination, timer, Temperature Indicator, multiple contactor, individual Phase control etc.

SPECIAL FEATURES

Compact in nature
It is available in portable trolley typestationery type model Amps.
Optional digitalanalogue timer.
Main Transformer upto 25, 000 Amps Naturally air cooled type.
View Complete Details
Ask Latest Price & Details
AC High Voltage Test Sets - Low capacity

AC High Voltage Test Sets - Low Capacity
  • Feature Multiple safety locks for the operator, Specially designed for field operation.
AC High Voltage Low capacity testers are specially designed for testing Insulators , CTs PTs , Low dielectric capacitive electrical equipment, transformers etc. as per National and International Standards, thus ensuring consistency and best quality. These instruments are air cooled, oil cooled or air & oil cooled combined as per design. The units have been made up to 800kV and up to 200kVA.The units have type of tests such as dry withstand, wet withstand, breakdown voltage in airoil, oil insulation, and pollution Test.
View Complete Details
Ask Latest Price & Details
L.T Parallel Inductor

L.T Parallel Inductor

Motorised moving coil and fixed reactor shall be provided for generating inductive current for canceling capacitive current to reduce the input current to 20% (from 750 A to 150 A)
View Complete Details
Ask Latest Price & Details
discharge rods

Discharge Rods
Suitable for high wind velocity areas & high temperature withstand capacity. Light weight allows one person to handle the rod easily from ground leveltower cross arm.Discharge upto 800 kv system.tested as per IEC-61235
View Complete Details
Ask Latest Price & Details
Earthing Rods

Earthing Rods
Unmatched Mechanical strength suitable for high wind velocity areas. High temperature withstand capability.Light weight allows one person to handle the rod easily from ground level Tower Coss Arm. Choice of different type of conductors clamps suitable for flat busbarACSR Conductor 4" IPS Aluminium Pipe, EarthingDischarge Rods for upto 800KV system and above. Moisture Resistance 'F' Class Insulation 100 % Safe for operator.
View Complete Details
Ask Latest Price & Details
Milli Volt Drop Test Set

Milli Volt Drop Test Set

  • Min. Order (MOQ) one Set(s)

Capable to measure milli volts between 1mV to 2000mV. Available 0-100, 200, 600.3000Amp DC.

 

Special Features

  • Continuous Operation available.
  • Optional terminals for computer connectivity (optional).

Additional Information:

Packaging Details : Box Packaging

View Complete Details
Ask Latest Price & Details
transformer test bench

Transformer Test Bench
Test Bench for Testing Motors, transformers and electrical Equipment etc. The Test Panel shall be suitable for 3 phase input supply having 63 Amp MCB for each phase independently. Phase ON Indicator, Voltmeter with selector switch to indicate the voltage of each phase. Amperemeter with Multirange CT of 55, 515, 530 aand 560 A of class 0.5 accuracy for each phase, 3 Phase wattmeter of suitable range.
View Complete Details
Ask Latest Price & Details
Cable Fault Burning Unit

Cable Fault Burning Unit

Converts high resistance faults to short circuit fauts. Available for HVLV cables. For made use only. Helps save the damaged part.Helps utilize the TDR, LV Fault Burner upto 30kVA, HV Fault Burner Upto 70kVA.
View Complete Details
Ask Latest Price & Details
Resistance Bank

Resistance Bank

The capacitor bank is used for improvement of power factor during load losses measurement of power transformer three phase 500 Volt shunt capacitor bank in the form of 100kVAr&20kVAr. PLC Based control systems Available.
View Complete Details
Ask Latest Price & Details
H.T Parallel Inductor

H.T Parallel Inductor

  • Features Compatible with any Tan Delta unit.
HT Parallel Inductor is used for range extension of MeggerTettexPresco AG Tan-Delta and Capacitance Test Set. It enables the inbuilt power supply to be able to test high capacity generators by regenerating the test current in parallel resonant design.The unit is so skillfully designed and constructed where we are able to achieve a Q-factor of 30 plus. The unit is housed in MS angle housing and manually controlled from the top.
View Complete Details
Ask Latest Price & Details
Electrical Test Bench

Electrical Test Bench
Phase ON Indicator, Voltmeter with selector switch to indicate the voltage of each phase. Ampere meter with Multi range ct of 55, 515, 530and560 A of class 0.5 accuracy for each phase, 3 Phase watt meter of suitable range.For Testing Motors, transformers and electrical Equipment etc.
View Complete Details
Ask Latest Price & Details
Insulation Test Sets

Insulation Test Sets

  • Capacity Up to 6KVA
  • O/p Voltage Up 60KV and 100mA
AC HV Rubber testing set is used for Testing Rubber Mats, testing High current is generated due to capacitive loading. AC High voltage test equipments are designed for continuous use, for testing, and can withstand short circuit. Fault burning can also be provided if desired.Technologically advanced design that helped make proper use of space and minimize the size of the equipment.The equipment has been made so that it is very simple to operate, thus any person after learning once can operate it
View Complete Details
Ask Latest Price & Details
Short Time Over Current Test Set

Short Time Over Current Test Set

The equipment is designed for supply high current for pre-set duration. The unit consist of a timer, Amperemeter with freezing facility to measure the short duration current, The equipment has provision for stepless control of the normal control and switch to set two times, 3 times, 6 times or 8 times the rated current. The output is brought out on copper bus bar. The unit is complete with Amperemeter, Timer, .5 classify and other controls.Compact in Size.Guaranteed for one year against manufacturing defects.
View Complete Details
Ask Latest Price & Details
Cable Termination Kits

Cable Termination Kits

Light weight allows one person to handle very easily. Specially crafted upto 1000mm sq cables.Available upto 33kV, Various angle Fittings
View Complete Details
Ask Latest Price & Details
Heat Cycle Test

Heat Cycle Test
  •  Heat Cycle Test Set Sr. No. 
  • Parameter Description
  • 1 Input Voltage
  • 380 / 400V 2 phase 50/60HZ  2
  • Output Current Up to 6000A
  • 3 Temprature Thermocouple
  • k-type(Optically isolated) or fibre optic type 4
  • Cable length Upto 15meter
  • 5 Current Injection carts
  • each capable to 750Amps 6
  • No. of carts Upto 7
  • 7 Heating Control
  • PID controlled with zero interlock bypass 8
  • Timer Upto 30 days
  • 9 AmpereMeter Range and  Accuracy 
  • Range  : As per capacity Accuracy : 0.5%
Heat Cycle Test Systems are designed to raise and control the temperature of a conductor or other low impedance electrical loop to simulate the current loading conditions found in electrical circuits.This heating is achieved by utilizing the test loop as the secondary winding of a current transformer for inductive heating. Measurement of the loop temperature is made by direct contact of a K-type thermocouple probe with the conductor of the test loop.Our systems are offered as low voltage test systems or high voltage test systems. The low voltage test system utilizes one loop of the conductor passing through the desired number of CT carts to reach the necessary current level. Additionally Impulse tests can be performed on the high voltage side of the test set up.Designed for working on 400V, 2 Phases of 3phase AC supply. Supplying up to 6000 Amperes in cables loop of up to 15 meter of suitable capacity. Various other optional accessories are available including advance control system.
View Complete Details
Ask Latest Price & Details
Tracking Index

Tracking Index
  • Input voltage                           :           220/ 230 Volts, Single phase 50/60 Hz. AC supply. Output voltage                        :           0-10KV
  • Output Current                       :           100mA Capacity                                  :           1 KVA
  • Rating                                      :           Testing duty (Continuous). Cooling                                   :           Air cooled.
  • (Peristaltic Pump Section) No. of Channel                       :           One
  • RPM                                         :           0.01 to 9.99 Flow Rate                                :           0.12 to 600 ml/hr
Tracking Resistance Erosion Test Equipment is used for checking the relative behavior of solid electrical insulating material with regard to their susceptibility to surface tracking when exposed under electric stresses, to water and contaminants, from the surroundings.The grading of materials arrived at by checking the tracking index may possibly differ from that obtained by utilizing other checking methods for the measurements of the tracking index.With this apparatus drops of an electrolyte are dropped at defined time interval to the surface of insulating materials between two electrodes to which a voltage is applied.The numerical values of the voltage corresponding to the asymptotes defines the tracking resistance.The value of voltage corresponding to number of drops is taken as the comparative index. (This test should be done as fast as possible)The number of drops to cause tracking at value of predetermined test voltage 10% below the number of drops value is indicated as the degree to which the reported comparative tracking
View Complete Details
Ask Latest Price & Details
Primary Current Injection test Set - Single Phase

Primary Current Injection Test Set - Single Phase
  • Capacity Up to 100KVA
  • O/p Current Up to 25000A
Primary Current Injection Test Sets are used to loading, Calibration and testing of CT's bimetals relays, Protection relays etc. Mostly Primary Injection Test set are designed as per customer's specification. The Primary Injections Test sets are of 15 minutes ON30Minutes OFF duty i.e. testing duty only. Loading transformers are design for continuous use for Temperature Rise or bus ductBus Bar etc. Optional accessories requirement may include cable termination, timer, Temperature Indicator, multiple contactor, individual Phase control etc. Equipments are Compact in nature. It is available in portable trolley typestationery type model Amps. Optional digitalanalogue timer. Main Transformer up to 25, 000Amps.
View Complete Details
Ask Latest Price & Details
Electromechanical Meter Test Bench

Electromechanical Meter Test Bench
Micro Processor Logic Controllers are used for variety of application ranging from control, data logging, Reports, generation of a single unit to entire Laboratory (Transformer High VoltageMotor) Test sequence control from a single PC.Data transferable to excel format for graphscharts or over lapping as per the capability of the excel spreadsheet software.Various Programmable Parameters.Simultaneous monitoring of input and output voltage and current.PresetProgrammableSelf Generating report format.
View Complete Details
Ask Latest Price & Details
AC High Voltage Test Sets - Cascaded

AC High Voltage Test Sets - Cascaded
  • Capacity Up to 320KVA
  • O/p Voltage Up 800KV and 400mA
AC High Voltage High capacity testers are specially designed for testing cables, Generators, transformers and other high capacitive equipments as per National and International Standards.The units have been made up to 800kV and up to 3000kVA.The units have type of tests such as dry withstand, wet withstand, breakdown voltage in airoil, oil insulation, and pollution Test.
View Complete Details
Ask Latest Price & Details
Interruption Test Set

Interruption Test Set

The input supply is expected to change time to time. So the voltage dip and interruptions test set is subjected on energy meter. the equipment consist of pre-set timer to supply voltage 100% or more or less as per requirement of the test for duration required by the test. The supply is Also cut off and re-stored again at a pre-set timing as per the test requirement.All the three test in one test set-up, Highly reliable electronic control circuit.Variable reference voltage for different range of Energy Meters.Set reference voltage induction on digital voltmeter for each phase, Suitable for single phase and three phase energy meters.
View Complete Details
Ask Latest Price & Details
ac equipments

Ac Equipments
  • Input Voltage 220/230 or 380/400V, 50/60HZ AC Supply
  • Output Voltage Integration of reactor after 100KVA,
AC High Voltage High capacity testers are specially designed for testing cables, Generators, transformers and other high capacitive equipments as per National and International Standards. During manufacturing each unit is tested at multiple stages, thus ensuring consistency and best quality.
Light in weight
Casted Wheel for easy movement
Multiple safety locks for the operator
View Complete Details
Ask Latest Price & Details
High Voltage High Capacity PD Free Test Set

High Voltage High Capacity PD Free Test Set

  • Input Voltage 220/230 or 380/400V, 50/60HZ AC Supply
  • Output Voltage Integration of reactor after 100KVA,
AC High Voltage High capacity testers are specially designed for testing cables, Generators, transformers and other high capacitive equipments as per National and International Standards. These instruments are air cooled, oil cooled or air & oil cooled combined as per design.The units have type of tests such as dry withstand, wet withstand, breakdown voltage in airoil, oil insulation, and pollution Test.Light in weight, Casted Wheel for easy movement
View Complete Details
Ask Latest Price & Details
High Voltage Low Capacity PD Free Test Set

High Voltage Low Capacity PD Free Test Set

  • Capacity Up to 320kVA
  • Input Voltage 220/230 or 380/400V, 50/60HZ AC Supply
AC High Voltage Low capacity testers are specially designed for testing Insulators , CTs PTs , Low dielectric capacitive electrical equipment, transformers etc. as per National and International Standards.These instruments are air cooled, oil cooled or air & oil cooled combined as per design. wet withstand, breakdown voltage in airoil, oil insulation, and pollution Test.Light in weight, Casted Wheel for easy movement, Multiple safety locks for the operator
View Complete Details
Ask Latest Price & Details
digital power supply

Digital Power Supply
  • High Accurac _+ 1%
Portable Unit for both applications. For field and Lab application. PLC, Motorised, Manual operation. Available upto 2000V @ 100 Amps.Built in Timer.Digital Timer
View Complete Details
Ask Latest Price & Details
pre heater

Pre Heater

Available upto 25000 Amp & 500kVA. Specially designed for testing & calibration of CT's, Bi-matals relays, Heat Run Test etc. Each unit is designed as per the customers specification.Units are Air cooledOil Cooled depending upon capacity and duty cycle.Duty cycle of 15 mins. ONOFF is for calibration purpose & continuous duty units are used for temperature rise test of Bus Ducts, Bus-Bars, Control Panel Switchgear etc.
View Complete Details
Ask Latest Price & Details
Sphere Gaps

Sphere Gaps

Sphere Gap is provided with Motorised arrangement to adjust the gap. The lower sphere gap shall Motorised and shall move upwards and downwards for the adjustment of gap. The upper sphere shall be hang shall be roof of the test lab with in insulator and current limiting resistance shall be provided.Available upto 500mm sphere supplied upto 300mm sphere.Digital distance measurement.
View Complete Details
Ask Latest Price & Details
Servo Voltage Controlled Stabilizer

Servo Voltage Controlled Stabilizer
  • Feature New innovated design for HT, High Capacity available, Economic to buy & use.
Servo controlled Voltage Stabilizers (SCIVS) are specifically designed to manage input fluctuations of various trends. The output voltage can be controlled to within +- 1.0%-+-0.5% of the desired output. For this precise control a solid state circuit with a permanent magnet motor, is utilized and proficient gear system.The Servo controlled Industrial Voltage Stabilizer over the rating of 1000kVA can be designed for use in 11, 000 KV or 415 V i.e. HT or LT
View Complete Details
Ask Latest Price & Details
Battery Discharge Set

Battery Discharge Set
  • Condition New
  • Packaging Box Packaging
  • Usage Battery Testing
  • MOQ As per Client Requirement

We, along with our veteran packaging professionals, ensure that the packaging products commence keeping the packaging guidelines in consideration. We strictly use quality packaging material to evade loss during transit. Purchasers can rest secure; our entire range is premium, as they are wholesaled by us after subjecting them to a string of quality control tests.

View Complete Details
Ask Latest Price & Details
Dc Battery Charger

Dc Battery Charger
  • Min. Order (MOQ) one Set(s)

“RE” Battery Charger are generally air cooled type portable & designed for dusty & humid climate at site Railway Station, outdoor installation etc. Main transformer of the chargers are wound with copper wire / Strips. 

CRGO core is used for magnetic circuit of the chargers. The charger mainly consist of Input ‘ON ‘OFF Switch, Input Fuse, Input ON Indicator, Rotary Switches with regulating transformer with main step up/step down transformer, silicon diode, rectification from AC-DC Ballast choke & output terminal. The output supply consist of surge separation circuit and whole storage condenser.

 

Special Features

  • Compact in Size.
  • Easy to operate.
  • Built-in safety arrangement for operator.
  • Special Insulating Paper is used for transformer winding.
  • Guaranteed for one year against manufacturing defects.
  • Efficient After Sales Service.

Additional Information:

Packaging Details : Box packaging

View Complete Details
Ask Latest Price & Details
Battery Chargers

Battery Chargers
Battery Charger are generally air cooled type portable & designed for dusty & humid climate at site Railway Station, outdoor installation etc. Main transformer of the chargers are wound with copper wire Strips. CRGO core is used for magnetic circuit of the chargers. The charger mainly consist of Input ON OFF Switch, Input Fuse, Input ON Indicator, Rotary Switches with regulating transformer with main step upstep down transformer, silicon diode, rectification from AC-DC Ballast choke & output terminal. The output supply consist of surge separation circuit and whole storage condenser.Compact in Size.Built-in safety arrangement for operator.
View Complete Details
Ask Latest Price & Details
Phasing Rods

Phasing Rods

Static Phasing Rods suitable for detection of phase and magnitudal voltage in outdoor and indoor power systems.
View Complete Details
Ask Latest Price & Details
DC High Voltage Test Set - Continuous Type

DC High Voltage Test Set - Continuous Type

This equipment is used for testing the underground cable, large Generator, Motor Transformer capacitor etc as per IS specification. The unit comes equipped with digital meters, motorized controls, onetwo way computer interface, Emergency shut down and Optimum operator safety features.
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Mr. Manish Arora (Rectifiers & Electronics Pvt Ltd)
  • 10/3 Dlf Ind Area Moti Nagar, Delhi - 110015
  • Share us via
    Linkedin pinterest
  • Call 08068051313 Ext. 873