Post Your Requirement Menu

Welcome User

Our Products

  1. Battery Chargers 2 Products / Services available
  2. Transformers 5 Products / Services available
  3. Generators 3 Products / Services available
  4. Measuring Instruments & Equipment 5 Products / Services available
  5. Domestic Fans, AC & Coolers 1 Products / Services available
  6. Garden & Outdoor Furniture 2 Products / Services available
  7. Electrical & Electronic Testing Devices 1 Products / Services available
  8. Electronic Components 2 Products / Services available
  9. Electric Fittings and Components 3 Products / Services available
  10. Voltage Stabilizer 1 Products / Services available
  11. Wire Making Machines 1 Products / Services available
  12. Electrical & Electronic Gadgets 1 Products / Services available
  13. Earthing Electrodes 1 Products / Services available
  14. Cables and Wire Accessories 1 Products / Services available
  15. Salon & Beauty Equipment 1 Products / Services available
  16. Testing Equipment 17 Products / Services available
  17. Testing Equipments 5 Products / Services available
  18. Other Products 25 Products available

Other Products / Services

Leading Manufacturer, Supplier & Retailer of Double Voltage Double Frequency Test Set, AC High Voltage Test Set - High Capacity, DC High Voltage Test Set - Stationary, DC High Voltage Test Set - Portable and current injection test set.

Double Voltage Double Frequency Test Set

  • Maximum Capacity Up to 10MVA
  • Output Voltage 1000V up to 1mVA,11kV up to 10MVA

Induced Over Voltage Test Set (DVDF) is used for testing the strength of insulation between turns and between other points of the transformers etc. as stipulated by BIS or other standard specification. For this test Double Voltage is applied across L.T. terminals for one minute, and to limit the magnetizing current over frequency is utilized. It is a mechanically coupled unit having motor and Generator with power and control panel to regulate the output voltage.A suitable control panel is utilized for motor starting, generator output control, measurement of all three phases, voltage and current for input and output with protection circuit.

View Complete Details

AC High Voltage Test Set - High Capacity

  • Feature Casted Wheel for easy movement,Multiple safety locks for the operator

AC High Voltage High capacity testers are specially designed for testing cables, Generators, transformers and other high capacitive equipments as per National and International Standards, thus ensuring consistency and best quality. These instruments are air cooled, oil cooled or air & oil cooled combined as per design. The units have been made up to 800kV and up to 3000kVA.The units have type of tests such as dry withstand, wet withstand, breakdown voltage in airoil, oil insulation, and pollution Test.

View Complete Details

DC High Voltage Test Set - Stationary

  • Input Voltage 220/230V or 380/400, 50HZ / 60HZ AC Supply
  • Capacity Up to 1000mA

DC High Voltage Test Set is used for testing cables, generators and other electrical equipments as per National and International specifications. The unit consist of variac, transformer , rectifier, condenser, bleeder, filter etc. All the components are housed in sheet metal housing or specially designed fiber glass housing which are coated with anti tracking paints.

View Complete Details

DC High Voltage Test Set - Portable

  • Feature Easy to operate,Digital meters for easy readability.

Portable DC High Voltage Test Set is used for testing underground cable, generators, switchgear etc. for understanding the condition of current leakage insulation condition at any given point. These are extremely light weight units designed for field operation (Substation, Power Projects, Remote sites etc.). The units are delivered in custom made carry boxes to endure rough and rugged transportation.

View Complete Details

current injection test set

  • Min. Order (MOQ) 1 Set(s)

Primary Injection test sets are used to loading. Calibration and testing of CT's bimetals relays, Protection relays etc. Mostly Primary Injection Test set are designed as per customer's specification. The Primary Injections Test sets are of 15 minutes ON30 Minutes OFF duty i.e. testing duty only. Loading transformers are design for continuous use for Temperature Rise for bus ductBus Bar etc. Optional accessories requirement may include cable termination, timer, Temperature Indicator, multiple contactor, individual Phase control etc. SPECIAL FEATURES Compact in nature It is available in portable trolley typestationery type model Amps. Optional digitalanalogue timer. Main Transformer upto 25, 000 Amps Naturally air cooled type.

View Complete Details

AC High Voltage Test Sets - Low capacity

  • Feature Multiple safety locks for the operator,Specially designed for field operation.

AC High Voltage Low capacity testers are specially designed for testing Insulators , CT’s PT’s , Low dielectric capacitive electrical equipment, transformers etc. as per National and International Standards, thus ensuring consistency and best quality. These instruments are air cooled, oil cooled or air & oil cooled combined as per design. The units have been made up to 800kV and up to 200kVA.The units have type of tests such as dry withstand, wet withstand, breakdown voltage in airoil, oil insulation, and pollution Test.

View Complete Details

L.T Parallel Inductor

Motorised moving coil and fixed reactor shall be provided for generating inductive current for canceling capacitive current to reduce the input current to 20% (from 750 A to 150 A)

View Complete Details

Milli Volt Drop Test Set

  • Min. Order (MOQ) one Set(s)

Capable to measure milli volts between 1mV to 2000mV. Available 0-100, 200, 600....3000Amp DC.   Special Features Continuous Operation available. Optional terminals for computer connectivity (optional).

Additional Information:

Packaging Details : Box Packaging

View Complete Details

Resistance Bank

The capacitor bank is used for improvement of power factor during load losses measurement of power transformer three phase 500 Volt shunt capacitor bank in the form of 100kVAr&20kVAr. PLC Based control systems Available.

View Complete Details

H.T Parallel Inductor

  • Features Compatible with any Tan Delta unit.

HT Parallel Inductor is used for range extension of MeggerTettexPresco AG Tan-Delta and Capacitance Test Set. It enables the inbuilt power supply to be able to test high capacity generators by regenerating the test current in parallel resonant design.The unit is so skillfully designed and constructed where we are able to achieve a Q-factor of 30 plus. The unit is housed in MS angle housing and manually controlled from the top.

View Complete Details

Insulation Test Sets

  • Capacity Up to 6KVA
  • O/p Voltage Up 60KV and 100mA

AC HV Rubber testing set is used for Testing Rubber Mats, testing High current is generated due to capacitive loading. AC High voltage test equipments are designed for continuous use, for testing, and can withstand short circuit. Fault burning can also be provided if desired.Technologically advanced design that helped make proper use of space and minimize the size of the equipment.The equipment has been made so that it is very simple to operate, thus any person after learning once can operate it

View Complete Details

Short Time Over Current Test Set

The equipment is designed for supply high current for pre-set duration. The unit consist of a timer, Amperemeter with freezing facility to measure the short duration current, The equipment has provision for stepless control of the normal control and switch to set two times, 3 times, 6 times or 8 times the rated current. The output is brought out on copper bus bar. The unit is complete with Amperemeter, Timer, .5 classify and other controls.Compact in Size.Guaranteed for one year against manufacturing defects.

View Complete Details

Heat Cycle Test

  •  Heat Cycle Test Set Sr. No. 
  • Parameter Description
  • 1 Input Voltage
  • 380 / 400V 2 phase 50/60HZ  2
  • Output Current Up to 6000A
  • 3 Temprature Thermocouple
  • k-type(Optically isolated) or fibre optic type 4
  • Cable length Upto 15meter
  • 5 Current Injection carts
  • each capable to 750Amps 6
  • No. of carts Upto 7
  • 7 Heating Control
  • PID controlled with zero interlock bypass 8
  • Timer Upto 30 days
  • 9 AmpereMeter Range and  Accuracy 
  • Range  : As per capacity Accuracy : 0.5%

Heat Cycle Test Systems are designed to raise and control the temperature of a conductor or other low impedance electrical loop to simulate the current loading conditions found in electrical circuits.This heating is achieved by utilizing the test loop as the secondary winding of a current transformer for inductive heating. Measurement of the loop temperature is made by direct contact of a K-type thermocouple probe with the conductor of the test loop.Our systems are offered as low voltage test systems or high voltage test systems. The low voltage test system utilizes one loop of the conductor passing through the desired number of CT carts to reach the necessary current level. Additionally Impulse tests can be performed on the high voltage side of the test set up.Designed for working on 400V, 2 Phases of 3phase AC supply. Supplying up to 6000 Amperes in cables loop of up to 15 meter of suitable capacity. Various other optional accessories are available including advance control system.

View Complete Details

Tracking Index

  • Input voltage                           :           220/ 230 Volts, Single phase 50/60 Hz. AC supply. Output voltage                        :           0-10KV
  • Output Current                       :           100mA Capacity                                  :           1 KVA
  • Rating                                      :           Testing duty (Continuous). Cooling                                   :           Air cooled.
  • (Peristaltic Pump Section) No. of Channel                       :           One
  • RPM                                         :           0.01 to 9.99 Flow Rate                                :           0.12 to 600 ml/hr

Tracking Resistance Erosion Test Equipment is used for checking the relative behavior of solid electrical insulating material with regard to their susceptibility to surface tracking when exposed under electric stresses, to water and contaminants, from the surroundings.The grading of materials arrived at by checking the tracking index may possibly differ from that obtained by utilizing other checking methods for the measurements of the tracking index.With this apparatus drops of an electrolyte are dropped at defined time interval to the surface of insulating materials between two electrodes to which a voltage is applied.The numerical values of the voltage corresponding to the asymptotes defines the tracking resistance.The value of voltage corresponding to number of drops is taken as the comparative index. (This test should be done as fast as possible)The number of drops to cause tracking at value of predetermined test voltage 10% below the number of drops value is indicated as the degree to which the reported comparative tracking

View Complete Details

Primary Current Injection test Set - Single Phase

  • Capacity Up to 100KVA
  • O/p Current Up to 25000A

Primary Current Injection Test Sets are used to loading, Calibration and testing of CT's bimetals relays, Protection relays etc. Mostly Primary Injection Test set are designed as per customer's specification. The Primary Injections Test sets are of 15 minutes ON30Minutes OFF duty i.e. testing duty only. Loading transformers are design for continuous use for Temperature Rise or bus ductBus Bar etc. Optional accessories requirement may include cable termination, timer, Temperature Indicator, multiple contactor, individual Phase control etc. Equipments are Compact in nature. It is available in portable trolley typestationery type model Amps. Optional digitalanalogue timer. Main Transformer up to 25, 000Amps.

View Complete Details

Electromechanical Meter Test Bench

Micro Processor Logic Controllers are used for variety of application ranging from control, data logging, Reports, generation of a single unit to entire Laboratory (Transformer High VoltageMotor) Test sequence control from a single PC.Data transferable to excel format for graphscharts or over lapping as per the capability of the excel spreadsheet software.Various Programmable Parameters.Simultaneous monitoring of input and output voltage and current.PresetProgrammableSelf Generating report format.

View Complete Details

AC High Voltage Test Sets - Cascaded

  • Capacity Up to 320KVA
  • O/p Voltage Up 800KV and 400mA

AC High Voltage High capacity testers are specially designed for testing cables, Generators, transformers and other high capacitive equipments as per National and International Standards.The units have been made up to 800kV and up to 3000kVA.The units have type of tests such as dry withstand, wet withstand, breakdown voltage in airoil, oil insulation, and pollution Test.

View Complete Details

Interruption Test Set

The input supply is expected to change time to time. So the voltage dip and interruptions test set is subjected on energy meter. the equipment consist of pre-set timer to supply voltage 100% or more or less as per requirement of the test for duration required by the test. The supply is Also cut off and re-stored again at a pre-set timing as per the test requirement.All the three test in one test set-up, Highly reliable electronic control circuit.Variable reference voltage for different range of Energy Meters.Set reference voltage induction on digital voltmeter for each phase, Suitable for single phase and three phase energy meters.

View Complete Details

High Voltage High Capacity PD Free Test Set

  • Input Voltage 220/230 or 380/400V, 50/60HZ AC Supply
  • Output Voltage Integration of reactor after 100KVA,

AC High Voltage High capacity testers are specially designed for testing cables, Generators, transformers and other high capacitive equipments as per National and International Standards. These instruments are air cooled, oil cooled or air & oil cooled combined as per design..The units have type of tests such as dry withstand, wet withstand, breakdown voltage in airoil, oil insulation, and pollution Test.Light in weight, Casted Wheel for easy movement

View Complete Details

High Voltage Low Capacity PD Free Test Set

  • Capacity Up to 320kVA
  • Input Voltage 220/230 or 380/400V, 50/60HZ AC Supply

AC High Voltage Low capacity testers are specially designed for testing Insulators , CT’s PT’s , Low dielectric capacitive electrical equipment, transformers etc. as per National and International Standards.These instruments are air cooled, oil cooled or air & oil cooled combined as per design. wet withstand, breakdown voltage in airoil, oil insulation, and pollution Test.Light in weight, Casted Wheel for easy movement, Multiple safety locks for the operator

View Complete Details

pre heater

Available upto 25000 Amp & 500kVA. Specially designed for testing & calibration of CT's, Bi-matals relays, Heat Run Test etc. Each unit is designed as per the customers specification.Units are Air cooledOil Cooled depending upon capacity and duty cycle.Duty cycle of 15 mins. ONOFF is for calibration purpose & continuous duty units are used for temperature rise test of Bus Ducts, Bus-Bars, Control Panel Switchgear etc.

View Complete Details

Sphere Gaps

Sphere Gap is provided with Motorised arrangement to adjust the gap. The lower sphere gap shall Motorised and shall move upwards and downwards for the adjustment of gap. The upper sphere shall be hang shall be roof of the test lab with in insulator and current limiting resistance shall be provided.Available upto 500mm sphere supplied upto 300mm sphere.Digital distance measurement.

View Complete Details

Battery Discharge Set

  • Condition New
  • Packaging Box Packaging
  • Usage Battery Testing
  • MOQ As per Client Requirement

We, along with our veteran packaging professionals, ensure that the packaging products commence keeping the packaging guidelines in consideration. We strictly use quality packaging material to evade loss during transit. Purchasers can rest secure; our entire range is premium, as they are wholesaled by us after subjecting them to a string of quality control tests.

View Complete Details

Phasing Rods

Static Phasing Rods suitable for detection of phase and magnitudal voltage in outdoor and indoor power systems.

View Complete Details

DC High Voltage Test Set - Continuous Type

This equipment is used for testing the underground cable, large Generator, Motor Transformer capacitor etc as per IS specification. The unit comes equipped with digital meters, motorized controls, onetwo way computer interface, Emergency shut down and Optimum operator safety features.

View Complete Details

Tell Us What are you looking for? Will call you back

Contact Us

  • Mr. Manish Arora
  • 10/3 Dlf Ind Area Moti Nagar, Delhi, Delhi - 110015, India