Sagar Tubes (India) - Iron & Metal Alloys

We are offering phosphor bronze strip, 2. Cusn5 - uns.c51000 phosphor bronze strips c51000 details & applications cusn5 - uns.c51000 phosphor bronze alloys, with a nominal composition of 94.80% copper and 5.0% tin, deoxidized with 0.2% phosphorus is the most widely used of the phosphor bronzes, which offering an optimum combinations of such engineering properties as high strength and ductility, superior fatigue and spring characteristics, excellent corrosion resistance, durability for severe service, good bearing qualities with low friction and higher wear resistance, superior forming and spinning, resistance to stress relaxation and good joining properties. In most cases, c51000 alloy has adequate electrical and thermal properties for many current-carrying and heat transfer requirements. c51000 alloy typical applications for phosphor bronze include bearings, bushings, gears, pinions, shafts, thrust washers and valve parts. chemical composition for c51000 phosphor bronze alloys sn: 4.50-5.50% p: 0.03-0.35% zn: 0.30% max. fe: 0.10% max. pb: 0.05% max. zn: balance.

We are offering aluminium alloys, a precipitation hardening 6061 aluminum alloy, using magnesium and silicon as its major alloying elements, 6061 aluminum has good mechanical properties and has good weldability. It is the most common aluminum alloy for general purpose. applications: aircraft structures, marine use, but its major use is in cans for food and beverage. aging: artificial aging is most commonly used for this alloy. T-6 tempering is widely used for most applications, t-4 and also t-651 are used also.

We are offering aluminium alloy , alloy 7075 has been the standard workhorse 7xxx series alloy within the aerospace industry ever since. It was the first successful al-zn-mg-cu high strength alloy using the beneficial effects of the alloying addition of chromium to develop good stress-corrosion cracking resistance in sheet products. Although other 7xxx alloys have since been developed with improved specific properties, alloy 7075 remains the baseline with a good balance of properties required for aerospace applications. alloy 7075 is available in bare and alclad sheet and plate product forms in the annealed state as well as several tempers of the t6, t73 and t76 types.

We offer a variety of stainless steel alloys, ideal for high temperature and extreme applications. 13-8 stainless steel is a martensitic, precipitation hardening stainless steel, meaning 13-8 mo has a high toughness and excellent resistance to stress corrosion cracking. These properties stem from a tight chemical composition control, plus a specialized melting for reducing impurities and minimizing segregation. Compared to other ferrous-based alloys, 13-8 mo offers high mechanical properties under severe, extreme conditions. Like many of our alloys, 13-8 mo is suitable for applications where high strength, toughness, corrosion resistance and stress resistance are required.

We are offering beryllium copper, beryllium copper strength one of the highest strength copper based alloys available on the market today is beryllium copper, also known as spring copper or beryllium bronze. The commercial grades of beryllium copper contain from 0.4 to 2.0 % beryllium. The small ratio of beryllium to copper creates a family of high-copper alloys with strength as high as alloy steel. The first of the two families includes high strength with moderate conductivity: applications of beryllium copperberyllium copper and its variety of alloys are utilized in very specific, and often tailor made applications such as oilfield tools, aerospace landing gears, robotic welding, and mold making applications. Additional non-magnetic properties make it ideal for down-hole wire line tools. These specific applications are the reason this copper is known as spring copper and other various names.

Hastelloy bars and rods we offer a comprehensive range of haselloy round bars, in grades hastelloy c22 and others. Known for resistant to general corrosion, crevice corrosion, intergranular attack, pitting and stress corrosion cracking, our range of haselloy round bars are widely used by our clients throughout the world. standard: astm asme sb 574grades:hastelloy c-4 (uns no. N06455), c-276 (uns no. N10276), hastelloy c 22 (uns no. N06022), hastelloy c 2000.