Saharanpur, Uttar Pradesh, India
Verified
Add Review
Our Products
Definition : Rigidity of the fluted structure is one of the essential characteristics of corrugated board and flat crush resistance is necessary to prevent crushing of the flute structure on the corrugator and other converting equipment. The corrugating medium test (CMT) permits the evaluation of corrugating medium before it is fabricated into combined board, and may also be used as a basis for judgement of fabrication efficiency.
Standardization : ISO 7263 , TAPPI T809, SCAN P27 , PAPTAC D29 , APPITA/ AS 1301.434s
Device Description : the concora medium fluter consists of 2 directly heated segmentds with 175+- 5*C , covered through a front plate and pressed against each other with definite force . the segmentd are directly heated with 200 W heating power . the sample is put on top and falls out ready from an opening in the lower area of the fluter. The sample is glued on a tape with the help of a “Third Hand” and is then ready for testing in a crush tester.
Test Description : the sample is put into the opening on the top of the instrument . by pressing the start button , the stripe with 6”x ½” (152.4 x 12.7 mm) dimesion is inserted into the machine and falls out ready formed on the lower part . the sample is then laid onto the opened “Third Hand” the holder is closed and the tape is glued onto the sample . this sample is now ready for testing.
Device Description: sturdy punch fully made from metal with feeder table and hand lever for easy operation. The punch and dye cutting unit consist of an upper and lower blade guarantees accurate sample strips . for use in tensile strength tests, ring crush tests, folding endurance test, water absorbency test and other similar tests. It eliminates testing errors due to sample preparation. Cutting of multi samples simultaneously possible.
Test Description : the sample materials is placed on the feeder table and supported by the feeder edged placed under the punching unit. By pushing the hand lever down , the sample is automatically clamped and a safety guard covers the punching unit. The sample strips fall through the lower part of the punching unit and are collected on a metal support plate.
Device Description: sturdy punch fully made from metal with feeder table and hand lever for easy operation. The punch and dye cutting unit consist of an upper and lower blade guarantees accurate sample strips . for use in tensile strength tests, ring crush tests, folding endurance test, water absorbency test and other similar tests. It eliminates testing errors due to sample preparation. Cutting of multi samples simultaneously possible.
Test Description : the sample materials is placed on the feeder table and supported by the feeder edged placed under the punching unit. By pushing the hand lever down , the sample is automatically clamped and a safety guard covers the punching unit. The sample strips fall through the lower part of the punching unit and are collected on a metal support plate.
Definition: Precision Cutter for speedy and accurate cutting of samples of 100cm2 in area without any deformation and damage.
Device Description : the cutter is made of casted aluminum base with a industrial grade corrosion resistant knife and easy to operate press handle for accurate cutting of the samples of size 100cm2 or desired range. The Cutter has a high capacity and several layers of paper profile can be punched out in one operation simultaneously. Test Description : Circular Punch & Die Cutter is an excellent and convenient precision cutter for speedy and accurate cutting of specimen 100 cm2 in area without any deformation and damage.
Definition : The water absorbency of paper (the cobb value) is defined as the quantity of water absorbed in a given time by one side of a unit area of paper or board placed horizontally under a head of one centimeter of water.
Standardization : ISO 535 , TAPPI T441 , SCAN P12, EN 20535, DIN 53132
Device Description : for the determination of the water absorption of sized paper and board , including fiberboard under standard conditions . A test piece is weighed immediately before and immediately after exposure one of the surface of the water for specified time , followed by blotting. The result in increase in mass is expressed in grams per square meter (g/m2) . the standard model has an test area of 100cm2 .
Device Description : the Burst Tester is built on a sturdy aluminum frame and the results are displayed on a digital load indicator . the Burst tester works according to Mullen principle . A piston pumps glycerin under the circular elastic diaphragm. The diaphragm bulges and distorts the sample, which is clamped around the periphery around the clamping bell. Pressure is increased until the sample is burst.
Test Description : It is measured by giving a hydraulic pressure through a rubber diaphragm on a circular area of the specimen of CBF under test conditions. Force requires to burst or complete rupture of the Paper/ board is measured visually. The bursting strength value is expressed in terms of kgs/cm2. The bursting strength defines the materials quality compare to the others. The value of the bursting strength will give the indication that how much weight may be carried in the Paper/box.
Impact testers are used for determining the impact strength of the boxes/containers made from cardboard, plastics or wooden materials. Different models are available in capacities ranging from 200 Kgs or Customized with necessary modifications in respect of track length, dolly size etc. The quality of the equipment is very rigid to withstand continuous usage. It has an automatic/pneumatic release mechanism, complete with traveling chain and motor
Additional Information:
Payment Terms : L/C, D/A, T/T
Packaging Details : Wooden Packing
Delivery Time : 15 days
Definition : The ring crush resistance of paper and paperboard is the maximum compressive force that a test piece will sustain without being crushed, the test piece being in the form of a cylinder, standing on one end, and the force being applied to the other end under specified conditions.
Standardization : ISO 13805 , ISO 13192 , ISO 13192 , TAPPI T808 , T809 , T811 , T818 , AFNOR 23035 etc.
Device Description : The edgewise compression strength of corrugated board is a principal element in determining the dynamic compression strength of the container made from that board. Since fiberboard shipping containers are frequently subjected to loads which are resisted by compression strength, this property is an important measure of the performance characteristic of corrugated board, useful in controlling the manufacturing process and in measuring the quality of the finished product. The compact , one spindle crush tester shows the measuring value on the four line digital display . the accuracy is 1+- % in a range of 10-5000 N . the measuring values are displayed in Newton.
Test Description : the operator pushes the quick button to drive the plates to the initial position to the desired tests . the sample is placed between the pressure plates , and the start button is pressed . the upper testing plates descend with the preset speed and compresses the sample . A sudden drop in the force shows the simple break. The values are displayed and plate is returned to initial position . after having taken out the sample , the instrument is ready for another test.
Dope Tester is used to determine the physical impact of a package being dropped from a height in any position. Control and hoisting features facilitates all respects of operation: drop height setting and test reset.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Delivery Time : 15 days
Device Description :The Punch is made of special steel and has a shape of circular knife in wave form. It is exchangeable and can be easily resharpened.
Test Description :For cutting out circular sample of paper, board and similar materials. One / several test specimen at a time by the precision punch and die cutting to cut the exact area required for the purpose of the grammage testing using precision balance to display the weight directly in terms of gram/m2
Circular Punch & Die Cutter is an excellent and convenient precision cutter for speedy and accurate cutting of specimen without any deformation and damage. It saves a considerable amount of time in sample preparation and is suitable for cutting a very wide range of sheet material such as plastics, textiles, paper and paper board. It is extremely useful for the determination of basis weight in paper machines profile when used in conjunction with GSM Scale. The Punch Cutter has a high capacity and several layers of paper profile can be punched out in one operation simultaneously.
