Bangalore, Karnataka, India
Our Products
A Complete range from main/substation boards to bus ducts with nominal ratings from 250A up to 6300A. Incomer feeder sections & bus coupler arrangements are available for rated currents up to 6300A.
Bus duct arrangements to transformers or between panel sections can be made in the enclosures & bus bar system. This ensures complete integration & provides a professional and uniform design throughout the switchgear room.
We are the main supplier of this product.
These panels will control the load power factor by sensing various available parameters like Current, Power Factor, and KVAR.Metering Chamber if necessary, i.e., Voltmeter and Ammeter are required; otherwise, only APFC relay of suitable stages would be sufficient. Auto/ Manual Selector switch is required for this panel as the panel will operate in both auto as well as manual modes. At the outgoing side, the panel will have suitable stages of KVAR Ratings generally starting from 2 up to 100KVAR. These capacitors will control through capacitor duty contactors which is controlled by HRC Fuses or MCBs. The Capacitor will be mounted in such a way that it can be removed and fixed easily. The Cooling fan and filters will be provided in the panel so that the hot air will exit from the panel. Usually the panel will be made in 4Stage, 6-Stage, 8-Stage or 16-Stage.
The APFC Panels were designed to provide significant savings on electric bills. They increase the life of electrical motors through heat reduction and provide surge protection for the entire system through KVAR Unit. The KVAR units will increase the power factor by reducing the amount of reactive power that loads draws.
Usually the capacitors used are of, Metalized Polypropylene, All Polypropylene, and Mixed Dielectric type.
These are starter panels used for Motors operation purposes. This panel will have one incomer, generally MCCB, SFU through which the Busbar of rated capacity will be fixed. At the outgoing side, the starter of DOL or STAR-DELTA type wiring will carried out. For Starters, it requires Contactor, MPCB, Overload Relay, and Indication Lamps with Push Buttons. Through Push Buttons, the starter gets ON and OFF, and is indicated through Lamps. The control & power wiring is carried out for starter wiring using required size of wires.
When power needs to be controlled, monitored, distributed, etc., in outdoor applications like in a transformer yard or on the terrace of buildings or in group housing projects spread out over a large space & so on, Feeder pillar panels or Outdoor Kiosks are used.The Panel boards are manufactured generally to IP55 Clause of Protection to ensure no ingress of water, dust or vermin. A canopy is fitted on top.
