Pune, Maharashtra, India
Our Products
This CVD-coated cemented carbide grade offers high flank wear resistance and is best for good to average machining conditions in all cast iron materials for continuous and interrupted cuts.
Benefits and featuresOur cast iron insert grade assortment consists of CVD-coated carbide grades and Ceramic grades for various machining conditions. Use the information below to find the right grade for your production.
GC3210CVD-coated grade with a thick, smooth, wear-resistant coating and very hard substrate. Ideal for high-speed turning of nodular cast iron.
CC6190Pure silicon nitride-based ceramic grade. Excellent wear resistance at high temperatures in high-speed roughing to finishing.
GC3225CVD-coated grade with high edge line security. Average to difficult machining conditions. Suitable for light to heavy interrupted cuts.
This PVD-coated carbide grade offers good edge line security and excellent resistance when machining materials that smear or create a built-up edge (BUE) on the insert. The sharp-edged geometry provides good performance with even tool wear.
Benefits and featuresIdeal for pocketing and profiling of difficult-to-machine heat resistant super alloy (HRSA) components, this new SiAlON ceramic grade offers secure and stable machining with ceramics when a high metal removal rate is required. Use this grade to meet the demanding applications of aerospace engine manufacturing.
BenefitsOur grade assortment for titanium and HRSAs includes CVD- and PVD-coated carbide grades, ceramic and cubic boric nitride (CBN) grades for various machining conditions. Use the information below to find the right grade for your production.
CC6160SiAlON based ceramic, designed to optimize performance in nickel base materials materials under relatively stable conditions and offers high security and predictable wear, due to high notch resistance.
CC6060SiAlON-based ceramic for optimized performance in pre-machined materials under stable conditions.
CC670Whisker-reinforced alumina-based ceramic with excellent bulk toughness designed for turning and grooving.
CC6065SiAlON-based ceramic that offers good toughness and security in toughness-demanding operations
CB7015CBN grade used for finishing operations in heat resistant super alloys.
GC1115PVD-coated carbide grade with high hardness and good resistance against plastic deformation combined with good edge line security.
S05FCVD-coated grade for high speed finishing or long cuts at lower speeds.
H13A (for titanium)Uncoated carbide grade that combines good abrasive wear resistance and toughness for medium to rough turning of titanium alloys.
From finishing to roughing, this carbide grade is your first choice when turning steel. Coated with Inveio technology, it has a broad range of applications and is recommended for continuous and interrupted cuts.
Benefits and featuresIdeal for difficult surfaces, GC4335 offers better security and reliability when faced with heavy interruptions, vibration and unstable conditions. This grade features Inveio coating technology for the highest wear resistance.
Benefits
| Turning hardened steel calls for super-hard insert grades. Whatever your component or requirements for surface finish, you will find productive insert grades here that can withstand high temperatures and cutting forces and still retain their cutting edges. |
This CBN grade is your first choice for hardened materials. With its medium content of boron nitride, it's suitable for medium to light interrupted cuts as well as continuous cuts at medium speeds in case-hardened steel.
Benefits and featuresHard part turning has been proven to reduce machining time and costs by 70% or more.
Find your solution for hard part turningWhatever your component design or surface finish requirements, you will achieve high productivity and outstanding quality with our HPT solutions.
Turn to hard part turningSwitching from grinding to hard part turning substantially increases productivity. Find out more about the super-hard insert grades optimized for hard part turning.
CB7105 and CB7115The new grades CB7105 and CB7115 break new ground in hard part turning. The grades achieve efficient and secure machining with excellent surface finish. The grades' speed capabilities, more secure edge line, and consistent tool life result in lower cost per component.
BenefitsOur hardened material insert grade assortment consists of CVD- and PVD-coated carbide and ceramic grades for various machining conditions. Use the information below to find the right grade for your production.
First-choice CBN grade for medium to light interruptions and continuous cuts at medium speeds in case-hardened steel.
CB7115First-choice CBN grade for high feed and/or depth of cut in continuous to light interrupted cuts at high speed.
CB7525First-choice CBN grade for heavy interrupted cuts at low to medium speed in case- and induction-hardened steel.
CB7015CBN grade with low CBN content. Use in continuous cuts at high speed in case-hardened steel.
CB7105First-choice CBN grade for low feed and continuous cuts in stable conditions at highest speed in case- and induction-hardened steel.
H10 is a first-choice grade for roughing and finishing of aluminum alloys.This uncoated carbide grade features a unique combination of excellent abrasive wear resistance and edge sharpness.
Benefits and featuresHeavy intermittent cuts or vibration-prone components can slow down your production. Find out how to to overcome these machining challenges.
Turning troubleshootingAre you dealing with long, snarling chips or poor surface finish? Find the most common turning challenges and their solutions here.
Turning aluminium - the basicsDiscover how the machinability of aluminium differs depending on alloying elements, heat treatments and manufacturing processes.
Our non-ferrous insert grade assortment consists of uncoated, PVD-coated carbide and crystalline diamond grades for various machining conditions. Use the information below to find the right grade for your production.
CD10PVD-grade recommended for stable conditions when high metal removal is needed in medium to rough applications.
CD05PCD grade for finishing and semi-finishing of highly abrasive materials such as aluminium alloys with high silicon content, metal matrix composites (MMC), fibreglass, fibreboard and wood laminates.
H10Uncoated carbide grade that combines excellent abrasive wear resistance and edge sharpness for roughing to finishing of aluminium alloys.
Dedicated four-edged inserts, this insert with optimized grade selection for roughing is your first choice for boring applications. The unique solution offers excellent chip breaking and increased tool life in ISO P, M, K and S materials.
Benefits and features
