Sanghavi Group

Makarba, Ahmedabad, Gujarat

MYMIX SUPER LATEX 770Product Description:

MYMIX Super Latex 770is high quality super latex additive to be mixed with MYMIX UTA to provide strong bonding with high flexibility to various substrates.

Advantages:

• High Bond Strength
• Increases the qualities of cement mortar, concrete and ceramic tile & Stone
• Excellent bonding properties
• Suitable for Internal and External application

Method of ApplicationSurface Preparation:

All Concrete surfaces should be clean from dust, free from contamination, efflorescence, and curing compounds

Mixing:

• Add MYMIX Super Latex 770 in clean bucket and add MYMIX UTA powder.
• Use approx. 7-8 ltrs for 25 kg bag.
• Mix by hand or slow speed stirrer to get a smooth and homogeneous mixture and wait for 5 mins.
• Remix and apply the materials with proper notched trowel.
• Shake well before use.

Application:

• Apply material to the recommended substrate with flat side of trowel.
• Comb on additional material with the notched side.
• Press the tile/stones within 15-20 min with a shuffling movement into the adhesive.
• Check regularly to ensure that the back of the tile is in full contact with the adhesive.
• Remove excess adhesive immediately from the joints.
• The proper preparation of the surface will make the fixing easier and quicker ensuring a better finish.

Note:

For application on plywood surface kindly refer MYMIX Technical Data Sheet.

Area of Application:

• Suitable for Interior and Exterior
• Ceramic Tile & Stones on wooden and plywood application
• Cement mortar & Screeds
• Used in bonding for plaster work as bond coat
• Can use old to new concrete substrate by bonding mortar
• Cement Backer board
• Gypsum Wallboard
• Cement Terrazzo

Packing Details:

• Available in 1 Liter, 5 Liter, 20 Liter.
• Bigger packing sizes are available on request.

Shelf Life:

• Best before 12 months from the date of manufacturing, in unopened condition stored in dry area.
• Avoid direct sun light

MYMIX LVP 220Product Description:

MYMIX LVP 220is a low volume Late modified acrylic co-polymer additive used to reduce water required and increaes the strength, workabbility and density at the same cement conteant. It is mixed with sand and cement to make screeds, cement plastering for old concrete to new concrete.

Advantages:

• Reduces water absorption
• Increases compressive strength
• Increases the quality of cement mortar and concrete
• Economical
• Low shrinkage characteristics

Area of Application:

• Excellent choice to use on new and old Substrate
• Crack repair
• Fixing all tile and stones
• Can use as bond coat mixing with cement and sand

Packing Details:

• Available in 1 Liter, 5 Liter, 20 Liter
• Bigger packing sizes are available on request.

Shelf Life:

• Best before 12 months from the date of manufacturing, in unopened condition and stored in dry area.
• Avoid direct sun light.

Shelf Life:

• Best before 12 months from the date of manufacturing, in unopened condition and stored in dry area.
• Avoid direct sun light.

Method of Application:Surface Preparation:

• All concrete Substrates: All concrete surfaces should be clean from dust, free from contamination, efflorescence and curing compounds.

Mixing For Old Concrete to New Concrete Substrate.

• Add MYMIX LVP220 in a plastic container and take 1kg of cement.
• Add cement gradually to MYMIX LVP220 with constant mixing.
• Ensure that premix should be uniform slurry and without lumps.
• Apply slurry on the properly prepared substrate using paint brush.
• Leave for 24 hrs and allow it to cure.

For Mortars and Plaster:

Use 30 Liter of MYMIX LVP 220 per 50 kg bag of cement (Cement Sand Ratio 1:3) to improve the properties of plaster mortar free from shrinkage crack and for higher compressive and tensile strength. Cured plaster with MYMIX LVP220 would harden faster.