Our Products
Falcon 1600, 4 to 16 channel process scanner is a highly versatile and economical module having Analog Inputs with RS485 / Ethernet port for online communication. Process scanner is an ideal solution for SCADA applications in Process Industries. Falcon 1600 can be used along with PLC's thus reducing project cost substantially. Analog input to Falcon 1600 can be mA / RTD (PT100, 3 wire) / Thermocouple or Voltage different for each channel. The Alarm / Control status of each channel is indicated on front LEDs. Serial port RS485 - 2 wire with Modbus RTU protocol or Ethernet with MODBUS TCP is provided. This feature makes Falcon compatible with all the standard SCADA software and PLC's used in Industry. Internal relay output 1 or 2 for common alarm. External relay output 8 or 16 for Individual alarm / Alarm & Trip / Control. Ethernet communication facility with MODBUS TCP protocol.
Input | RTD Pt100 (3wire), 0 - 20 mADC, 4-20mA, Thermocouples J,K,R,S,T,B,E 0-1VDC and 0-4VDC for each channel. (Combination factory set) |
|
Channels | Max 16 Channels in step of 4 Channels. | |
Display | 7 Segment RED LED, 2 - Digit Channel no. 5 - Digit Process Value with sign. |
|
Serial Port | Optically isolated RS485 - 2 wire port with MODBUS RTU protocol. Ethernet port optional. | |
Alarm Output ( Optional ) | 1 or 2 common alarm relay output, contact rating 230 VAC,1 Amp.Confirm relay logic at the time of ordering. | |
Control Output ( Optional ) |
8 or 16 nos external relay outputs used as a) 1 Relay per channel with Alarm / Control logic b) 2 Relay per channel (max 8 channels) with alarm-trip logic. External relays can be operated from SCADA also. Confirm relay logic at the time of ordering |
|
Cabinet | Horizontal Unit Vertical Unit Bezel: 96 x 192mm (H x W) Bezel: 192 x 96mm (H x W) Depth: 195 mm Depth: 195 mm Cutout: 92 x 186 mm (H x W) Cutout: 186 x 92 mm (H x W) |
4 channel Scanner with 4 Digital Inputs and 4 Digital Outputs
Falcon 444 , 4 channel scanner with 4 digital inputs and 4 digital outputs is a compact and versatile indicating unit. It has four analog inputs of 4-20mA which is industry standard.It is having two software writable channels. These inputs are keyboard scalable to their corresponding engineering units. Falcon 444 has facility of connecting four digital inputs either from potential free contacts or from sensors like proximity switch, limit switch etc. There is also facility of four digital outputs which can be connected to external relay card. These outputs can be operated from remote computer. Optically isolated RS232 communication port with MODBUS RTU protocol for SCADA/DCS connectivity. Falcon 444 is a ideal instrument to be used along with small automation machines as a local indicator- cum controller- cum- SCADA I/O module.Falcon 444 can be customized for OEM applications.
RS232-RS485 Converter
The CSCAN 485 is a RS 485 to RS 232C converter and vice-versa. The conversion is bi-directional. Both ports are optically isolated. We can give supply as 230VAC/110VAC or DC version 24V is available. RS 485 to RS 232C converter is used in application like interfacing field instrumentation with SCADA/PLC/DCS. RS 485 to RS 232C converter is used in many companies such as Sciemens Ltd, L&T Pvt Ltd, Jindal Steel & Power Ltd etc.which works in Auto mobile, Steel Industry, Automation and Project Industry.
Technical Specifications | ||
Supply | 230 VAC/110 VAC, +10 %, single Phase, 50 Hz,24VDC, +10 %, 1.8Wmax. | |
Input | 2 wire RS485 (CSCAN485DC-2) 4 wire RS422 (CSCAN485DC) |
|
OUTPUT | RS 232C | |
BAUD RATE | Autobaud selection from 300 to 115200 baud | |
ISOLATION | 1000VDC Isolation between input and output. | |
TERMINATION | RS485 / RS422 and supply connections on screw type. 9 pin D type female connector for RS232C. | |
Cabinet | DIN rail mount,Size: 70 x 44 x 114 mm (HxWxD) |
RS485 To RS485 Repeater
The CSCANRPT485 is a RS485 / RS422 to RS485 / RS422 Repeater operating on 230 VAC supply.The conversion is bi-directional. Both ports are optically isolated. RS 485 Repeater is used in application like interfacing field instrumentation with SCADA/PLC/DCS. RS 485 Repeater is used in Automation and Project Industry.
RS235 Isolator
The CSCANISO-232 is a RS232C to RS232C ISOLATOR operating on DC supply. The conversion is bi-directional. Both ports are optically isolated. RS232C to RS232C ISOLATOR is used in application like interfacing field instrumentation with SCADA/PLC/DCS. RS232C to RS232C ISOLATOR is used in Automation and Project Industry.
RS232/RS485 - Ethernet Converter
The CSCAN - ETHERNET is a RS 485 / RS 232C (RTU side) to Ethernet (PC LAN side)converter. The conversion is both ways. Both ports are optically isolated. Serial to Ethernet Converter is also used in application like interfacing field instrumentation with SCADA/PLC/DCS.
USB to RS485 Converter
The CSCAN-485-USB is a RS 485 to USB bidirectional converter. Now-a-days most desktop computers and Laptops provide USB port instead of RS232 COM port. The CSCAN-485- USB provides isolation between USB port, RS485 port and Supply. USB to RS485 Converter is designed for Industrial application
Hart - RS485 Converter
HMT-112, HART to MODBUS Converter is designed to accept HART inputs from maximum 15 slave units and convert standard variables into fixed MODBUS address registers. This is useful to accept / read exact values available for Flow, Pressure, Temperature transmitters in digital form in the control room eliminating errors in Analog input acquisition and process systems. User selectable baud rate for MODBUS Master on DIP switch is provided. LED Indications for master and slave operations for easy diagnosis.
Technical Specifications | ||
Supply | 10-28 VDC | |
COMMUNICATION | Rs485 for Master side. HART on slave side. | |
COMMUNICATION SETTINGS | 8 way DIP switch for baud rates from 9600,19200,38400, 57600 & station ID from 1 to 64 for MODBUS side. | |
NO OF SLAVES | 15 HART slave units | |
MODBUS RTU | On MODBUS RTU (Master) HMT-112 gives Floating point value of Current, Primary, Secondary, Third & forth Variables. Engineering units for 4 variables& Device information like device ID, MFR'S code,hardware, software version etc. for HART slave units. (maximum 15). HART slave status indication in MODBUS registers |
The TRANSLATOR is a Ethernet (PC LAN side Master ) toRS232 or RS485 (RTU side - Slave) protocol converter converts MODBUS TCP-IP protocol to MODBUS RTU protocol. MASTER side is Ethernet (PC LAN side). (TCP-IP protocol). SLAVE side RS232 or RS485 (2 wire). (MODBUS RTU protocol). LED Indications for master and slave operations for easy diagnosis.
Technical Specifications | ||
MOUNTING | DIN rail mount ,ABS molded , 20 terminal box. 70 x 100 x 114 mm ( H x W x D ). |
|
SUPPLY | 230 VAC / 110 VAC +10%, 1ph, 50 Hz. | |
SERIAL COMMUNICATION |
MASTER SIDE - > ETHERNET TCP-IP protocol SLAVE SIDE -> RS232 or RS485 MODBUS RTU protocol. |
|
MODBUS RTU | On Master side Read/Writes coil status, input status, holding register, input register values of slave unit having MODBUS RTU protocol connected on RS232 or RS485 slave side. |
USB to RS485 Converter Self Powered
The CSCAN-485-USB is a RS 485 to USB bidirectional converter. Now-a-days most desktop computers and Laptops provide USB port instead of RS232 COM port. The CSCAN- 485 - USB provides isolation between USB port, RS485 port and Supply. USB to RS485 Converter is designed for Industrial application
Single Channel 4-20Ma to RS485 /RS232 Converter
Falcon 100 is a single channel analog input to RS485 / RS232 output module, which is best suitable for SCADA applications. The output is on RS485 / RS232 with Modbus RTU protocol which is a industry standard protocol, Optionally ASCII protocol can be provided. DIN Rail mounting makes it easy to be fitted in panel. It operates on 230 VAC or 110 VAC supply (factory set). DIP switch is provided for ID and baud rate settings.By using Falcon 100 you can directly connect transmitter to RS485 bus. This saves cost and time for cable laying. Moreover the signal noise problems are completely eliminated as we are transmitting digital signal to control room. Ideal for SCADA applications.
Single Channel Digital Counter
Digital Counter accepts pulse input from potential free contact or 24VDC output of proximity sensors/ encoders etc. SDC 9648 has 8 digit display so that most of the standard counting applications are catered. Scaling facility is available to display value as per process variable. Serial port RS 485 for online communication with MODBUS RTU protocol gives facility to connect the unit on SCADA. Ideal for all types of production counting/batch applications. SDC 9648 is intended to be used for all types of counting applications like production counter, event counter, digital energy counter etc
In electronics, signal conditioningmeans manipulating an analog signal in such a way that it meets the requirements of the next stage for further processing. Most common use is in analog-to-digital converters. Signal inputs accepted by signal conditioners include DC voltage and current, AC voltage and current, frequency and electric charge. Sensor inputs can be accelerometer, thermocouple, thermistor, resistance thermometer, strain gauge or bridge, and LVDT or RVDT. Specialized inputs include encoder, counter or tachometer, timer or clock, relay or switch, and other specialized inputs. Outputs for signal conditioning equipment can be voltage, current, frequency, timer or counter, relay, resistance or potentiometer, and other specialized outputs. It is primarily utilized for data acquisition, in which sensor signals must be normalized and filtered to levels suitable for analog-to-digital conversion so they can be read by computerized devices. Other uses include pre-processing signals in order to reduce computing time, converting ranged data to Boolean values.
Categories
PC-ISO Signal IsolatorLoad Cell Amplifier
PC-ISO Analog Isolators and Transmitters
Signal Isolator model PC-ISO is a highly reliable, accurate input-output isolator with fully flexible design approach. The isolation is provided between input and output and between outputs in case of multioutput versions. Signal Isolator accepts AC/DC voltage, AC/DC currents as input and provide output in form of DC current or voltage in any specified range (standard range is 4-20mA). Signal Isolator provides galvanic and optical isolation of 1.5 kV which is 3 to 4 times higher than conventional isolators. Signal Isolator is available in 1 input- 1 output , 1 input- 2 output and 1 input- 4 output versions. Transmitter power supply of 24VDC, 30mA is available as an option. Thus in case of loop powered transmitters, need of separate power supply pack is eliminated.
Load cell (Bridge) Converter model PC-SC-LC is a highly reliable, accurate. Load cell (Bridge) Converter provides highly stable excitation voltage to load cell, (bridge) so as to get mV output and provide amplified output in form of DC current or voltage in specified range (standard range is 4-20mA). PC-SC-LC output is factory scaled as per load cell specifications provided. The output of Load cell converter can be connected to any standard industrial control systems like controllers, PLC, DCS etc. It can be connected with our Isolator model PC-ISO to provide multiple outputs for control and recording. This combination also provides optical and galvanic isolation between field inputs and control room. Load cell (Bridge) Converter is supplied in compact DIN rail mount enclosure which makes it convenient to mount in any standard Industrial Panel.
Sensor & Transmitters are basic elements required for measuring any process variable. Scan Electronic Systems provides sensors / transmitters for TEMPERATURE, HUMIDITY and PRESSURE. HUMIDITY sensor comes with its transmitter so as to provide commonly used voltage or current output. It normally comes as a combined transmitter of temperature & humidity.These sensors are available in wide measuring range, operating temperature range etc. Sensor selection is mainly based on measuring range, operating conditions, mounting, size, medium, application area (hazardous or safe), type of output signal required.
Model PC-UC-45B field calibrator is widely used calibration tool in process industry for last two and half decades functionally. Battery operated calibrator is designed to tackle most common trouble-shooting during commissioning and routine maintenance. Battery operated calibrator is truly hand held calibration instrument purposely limited functionality to simplify its use. With all its features 45-B battery operated field calibrator is an essential tool in service engineers kit.
Features :
Mains Operated with indication PC-UC-45-M
Model PC-UC-45-M tabletop universal calibrator is widely used for in-house calibration and testing of process control instruments. Mains Operated with indication, this Calibrator is simple in operation, high accuracy and stability which make it an essential instrument in production units, calibration and quality control laboratories service stations in instrumentation field. It comes with certification from authorized institutions like ETDC, ERTL, IDEMI. Model 45-M can be used as certified source for calibration with traceability to national standards.
Features :