SCB Interconnection Solutions Pvt Ltd

Outer Ring Road, Bangalore, Karnataka

SURFACE TECHNOLOGY

• BRUSHING + CLEANING
• LEVELLING + CLEANING
• OXIDE REPLACEMENT
• STRUCTURING + CLEANING
• SURFACE FINISHING

RESIST TECHNOLOGY

• DES
• CHEMICAL MILLING
• REGENERATION
• SES

DESMEAR + METALLIZATION

• DESMEAR
• DIRECT METALLIZATION
• ELECTROLESS COPPER
• ELECTROPLATING
• IMMERSION TIN

AUTOMATION + MEASURING EQUIPMENT

• Buffer
• Conveyor
• Panel Measuring Table
• Unloader + Loader

VERTICAL PROCESSING

• VERTICAL SPRAY PROCESSING EQUIPMENT

Standard Brushing machine

The standard brushing machine is primarily used for the deburring and cleaning of drilled PCBs. Thin inner layers are brushed bi-directionally at a high oscillating frequency. The distance between the brushes and the panel is automatically adjustable. The copper centrifuge "Cecumat" removes the copper abrasion from the rinsing water.

DEVELOP-ETCH-STRIP======DES

Developing - Etching - Stripping. In a typical inner layer line the non-exposed resist is developed in the developer, the bare copper is sprayed with an acid etching solution in the etching module and removed down to the base material and the resist is stripped off by using an alkaline solution. With outer layers the photo resist is used to define the pattern of an additionally deposited metal resist layer and is removed in the stripper using an alkaline solution.

Strip Etch Strip====SES

Stripping - Etching - Tin stripping. In the production of outer layers, photo resist is used for the structuring of an additional, deposited layer of metal resist, and then removed again in the stripper. The exposed copper is etched off in the alkaline etching module down to the basic material and the metal resist (Sn) is removed in a tin stripping system

ELEctro Plating Line

The galvanic plating system NTwC features a segmented contact frame, which permits contact of the panels only along the side edges and ensures an even copper deposition. During the plating process, the pulse form is controlled by rectifiers. The targeted flooding with fluid jets provides an optimum electrolyte exchange.

Vertical Spray Processing Equipment

Vertical processing has many considerable advantages such as little footprint, a service-friendly design and a contact-free transport system. Most notably vertical processing allows a double-sided symmetric chemistry treatment by identical process conditions on both sides of the substrate.

This is especially beneficial in etching: by using a special chemistry that only is effective when hitting the substrate, the process result is absolutely homogeneous and the well-known puddling effect that occurs in horizontal etching is completely eliminated. Still up to today elaborate intermittent spraying techniques are necessary in trying to compensate this puddling effect.

The Vertical Transport with Clamping (VTwC) is available for all spray applications: precleaning, resist and soldermask developing, flash etching, CuCl etching, resist stripping and MEC etch bond.

Reverse-engineering of boards and data Produce PCB fabrication Gerber and drill files from bare boards and / or artwork for PCB design and Legacy re engineering applications. Re-engineering application.

ScanCAD has been offering PCB Re-Engineering systems to the marketplace since 1990 and our systems are the leading systems in the world. We offer the only system that can generate all the Gerber data and Drill data to re-manufacture a PCB to the same Form, Fit and Function as the original PCB which eliminates the need for costly and time consuming testing and re-certification. In addition, we also offer additional software modules which can take the data back to schematic or into a CAD package for re-design

ScanFAB

ScanFAB is a flatbed scanner based re-engineering system that has the capability of scanning PCB's, film, stencils, etc and producing the Gerber data and Drill files necessary to manufacture the PCB. It also contains a full Gerber editor that can be used to modify the Gerber data as necessary

The high resolution scanner included with the system is calibrated with a NIST traceable glass plate ensuring an accurate image of the scanned film, stencil or PCB. The color scanning capability of the scanner and the powerful color separation software algorithms in the system permit the fast and easy color separation of images needed to vectorize multilayer PCBs. The system also includes some powerful raster filter, clean up and editing features to help massage the raster data prior to vectorization.

The full FAB product has all of the powerful vectorization functions that have made ScanCAD successful for the past 25 years. The resulting Gerber X data file sets the quality standard in the industry and is the reason why ScanFAB is the most successful and widely used PCB re-engineering system in the world today

Fully integrated, stand alone workstation

PC-based software integrated with a high-resolution, calibrated image processing unit

Reverse-engineering of boards and data

FLYING PROBE TESTER

ScanINSPECT FPT is a flying probe electrical tester suitable for fixture-less bare PCBs. It can also be used in combination with a grid tester for fault verification or to test nets exceeding test points of a grid tester

ScanINSPECT FPT is capable of performing electrical tests on PCBs in many situations such as:

• Prototypes
• Samples
• Small volume production
• Determination of golden board
• Combination test with a grid tester
• Fault verification

A PCB is tested against a netlist without the need for fixtures. Hence, test can commence immediately after PCB production