Jigs, Casting Dies, Die Casting Moulds & Moulding Tools #354484

Beam moulds for casting, concrete specimens for flexure tests. specifications : made of cast iron. The moulds are made of 4 plates assembled together. Each mould is supplied complete with base plate. Faces are machined flat to +- 0.2mm. And finished in size to 0.2mm.10cm x 10cm x 50cm (is. 516 - 1959) 15cm x 15cm x 70cm (is. 516 - 1959) 15cm x 15cm x 75cm. 4cm x 4cm x 16cm

About cylindrical mouldsas per is : 516, is : 10086-1982.These are used to cast cylindrical cement concretespecimens for compressive strength tests.Specificationthese moulds are made of cast ironthe moulds is split vertically into two parts.the mean internal diameter is within +- 0.2mm andheight is within +- 1mm.the ends are machined to +- 0.05.the base plate and top plate are machined flat to +-0.03mmavailable sizea) 50mm dia x 100 mm ht.B) 75mm dia x 150 mm ht.C) 100mm dia x 200 mm ht.D) 150mm dia x 300 mm ht.E) 300mm dia x 600 mm ht.F) 450mm dia x 900 mm ht.

Shrinkage bar mould is : 4031, 10086, astm c 227the mould is used for casting specimens of cement aggregate combinations for measuring the potential expansive alkali reactivity. Specification: the mould which has 25mm x 25mm effective gauge length is made of mild steel and has accurately machined faces. The parts of the moulds are tight fitting and firmly held together when assembled. Supplied complete with base plate and four stainless steel smooth reference pins. shrinkage bar mould (two gang)as above but with two compartments assembled on a angle base plate. shrinkage bar mould (three gang)as above but three compartments.Shrinkage bar mould (four gang)as above but having four compartments. Note : bar mould as above but in gun metal as well as with knurled and threaded reference pins are also available. Spares : stainless steel smooth or knurled & threaded reference pins as required. supplied in packs of one dozen.