Our Products
Device name: 2 in 1 Keel Forming Machine Equipment profile length X width X Height 11mX1.3mX1.5m Equipment configuration uncoiler-mainframe-cutter-bracket-hydraulic station-control cabinet Main motor power, cutter motor power 4kw Hydraulic power 1.5kw Total weight: 4t
Device name: | Photovoltaic Stents Forming Machine |
Equipment configuration | uncoiler - straightener - host - adjustable twisting device - double cylinder after punching and shearing device (with single die and punching and shearing die) - finished product bracket - hydraulic station - control cabinet |
Suitable for aluminum, color steel, stainless steel |
Easy for operation |
Stable performance |
Cut to length line, is an automatic transversal cutting production line, for cutting steel, aluminum, brass, etc, sheet stirp coil.
Cut to length line, can uncoil metal strip coil, then straighten metal strip,
then feed metal strip forth to shearing machine, then shearing machine cut metal strip transversely, in order get required length metal sheet plates, as per required length.
Model Coil Maximum Width (mm) Strip
Thickness
(mm) Sheet Plate Length Coil
Weight (ton) Floor Area (m)
LH-CTL-650 100-620 0.3-2mm 300 1-5 215
LH-CTL-850 200-800 0.3-2mm 500 1-5 2.515
LH-CTL-1300 300-1250 0.3-2mm 550 1-15 418
LH-CTL-1500 600-1500 0.3-2mm 500 1-15 520
LH-CTL-1600 600-1600 0.3-2mm 500 1-20 720
LH-CTL-1800 800-1750 0.3-2mm 500 1-25 822
Cut to length line, is an automatic transversal cutting production line, for cutting metal sheet stirp.
Cut to length line, can uncoil metal sheet strip coil, then straighten metal sheet strip, then feed metal sheet strip forth to shearing machine, then shearing machine cut metal sheet strip transversely, in order to get required length metal sheet plates.
Model | Coil Maximum Width (mm) | Thickness (mm) | Slitted Strips Quantity | Coil Weight (ton) | Floor Area (m) |
---|---|---|---|---|---|
LH-CTL-650 | 100-620 | 0.3-3mm | ï¼300 | 1-5 | 2×15 |
LH-CTL-850 | 200-800 | 0.3-3mm | ï¼500 | 1-5 | 2.5×15 |
LH-CTL-1300 | 300-1250 | 0.3-3mm | ï¼550 | 1-15 | 4×18 |
LH-CTL-1500 | 600-1500 | 0.3-3mm | ï¼500 | 1-15 | 5×20 |
LH-CTL-1600 | 600-1600 | 0.3-3mm | ï¼500 | 1-20 | 7×20 |
LH-CTL-1800 | 800-1750 | 0.3-3mm | ï¼500 | 1-25 | 8×22 |
Die clearance too small- Clearance can be proper clearance or tight clearance. In proper clearance fracture lines meet, punching forces are balanced. In general, shear strength determines clearance (10% is good for low shear strength aluminium). The recommended minimum die clearance is 0.08mm. In tight clearance fracture lines do not meet, secondary shear cracks, extra energy is required and involves higher tool wear. Poor or no maintenance on the tool- Proper tool maintenance results in flatter sheets, cleaner holes, less stress on tool and machine, longer tool life and maxima coating is not affected. To maximize tool life sharpen frequently, use proper die clearance and shear configuration, lubricate punch, guide and sheet, inspect tool holders for wear, treated tools should be used for special applications, radii should be used on all sharp corners, turret alignment should be checked regularly. Turret alignment requires adjustment- Thick turret alignment tools include mate pilot alignment system, standard alignment tool.