Chlorine Leak Absorption System with Neutralisation Tank The chlorine gas leakage absorption is a safety device which reduces the risk of chlorine gas spreading into atmosphere from 100 kg cylinder or from 900 kg ton containers to absorb in caustic solution creating hypo chlorine and can be reused or use as cleaning agent. This system consists of a blower, an alkali (NaOH) tank, an absorption tower packed with rasching rings, alkali circulation pump, piping valves, light weight FRP and PVC duct. In the event of leak which is uncontrollable with emergency kit this system would allow the person to breathe easily rather than panic. In this system, the leak is confined by hood covering the leaking container, sucking the chlorine by blower and delivering it to absorption tower. Chlorine leak absorption capacity of the system is kept 100 kg/hr & 200 kg/hr for 100 kg cylinder and 900 kg tonner respectively.

Online Direct display Residual Chlorine Analyser Range from 0-5 ppm Sensor Based on ORP Milivolt 4-20 MA DC, Micro process control Circuit,   Automatic controller to PPM Ampient Temperature 32 Degree C Continuous monitoring

A versatile sampling system for detection at a Particular Point or location  Can be installed in hazardous area. Continuous monitoring with immediate response. Long lasting electrochemical sensor. Record output 4 to 20 MA. Easy maintenance and calibration. Optional battery backup. Wall or panel mounted or portable model also available. Alarm set point can be set to any range from 0 to full. Three different gas sensors or same can be used. Direct Digital read out in PPM

Cylinder Keys, Copper Tubes, Clamps, Connectors, Valves Both, Chlorine cylinders as well as Tonners valves are available conforming to IS:3224  

This apparatus is equipped with a cylinder containing compressed oxygen or air which can be strapped on to the body of a user or with a canister which produces oxygen chemically when the reaction is triggered. This type of equipment is suitable for high concentration of chlorine in an oxygen deficient atmosphere.  

• CabinetSelf Coloured Fibre Glass
• Filterstainless steel body with inside PTFE Silver Metal coating & fine glass wool.
• Gauge IsolatorsStainless steel body separated by PTFE / silver / diaphragm filled with oil.
• Vacuum ControllerUHMWHDPE chambers with PTFE diaphragm & silver / Monel intel valve, also Teflon seating with hastelloy "C" spring.
• Flow MeterBorosilicate glass tube with teflon / glass float.
• InjectorPVC body with hastelloy "C" spring loaded check valve.
• Meter Ratio20 : 1
• Water Pipe Connection32" Dia G.I. / PVC Water Inlet 40" Dia C / PVC, solution line.
• Vacuum Tubing9mm ID soft polyethylene tube
• Maximum Working Pressure15kg / cm2
• Maximum Working Back Pressure7kg / cm2
• Shipping weight40kg
• DimensionH'5 x W 1.5' x D1'

A versatile system for boosting the flow of chlorine gas when ever the requirement of chlorine gas is more.  Control panel 230 V electric supply to 24 volt Wall mounting arrangement Temperature controller to 80-85 degree.

Online Direct display Residual Chlorine Analyser Range from 0-5 ppm Sensor Based on ORP Milivolt 4-20 MA DC, Micro process control Circuit,   Automatic controller to PPM Ampient Temperature 32 Degree C Continuous monitoring

Automatic Chlorine Cylinder / Tonner Change Over Panel When one manifold or tonner get empty the ADCOP switch over from an empty container to a full one with out interruption of chlorine flow with the help of control panel and a 3-way motorised ball valve.  Robust design 3 way motorized ball valve, actuator AC input 230V Control Panel with 230V single phase Power supply Electrical pressure switch of 0-12kg./cm2 adjustment. Ball valve S.S 316 ½" NB

A versatile sampling system for detection at a Particular Point or location  Can be installed in hazardous area. Continuous monitoring with immediate response. Long lasting electrochemical sensor. Record output 4 to 20 MA. Easy maintenance and calibration. Optional battery backup. Wall or panel mounted or portable model also available. Alarm set point can be set to any range from 0 to full. Three different gas sensors or same can be used. Direct Digital read out in PPM

Cylinder Keys, Copper Tubes, Clamps, Connectors, Valves Both, Chlorine cylinders as well as Tonners valves are available conforming to IS:3224  

It consists of various tools and appliances like gaskets, yokes, studs, tie rods hoods, clamps, spanners, mild steel channels, screws, pins, wooden pegs etc. of standard sizes. Separate kits are used for cylinders and tonners. All the gadgets are designed for using in controlling or stopping the leakages from valves, fusible plug and side walls of cylinders and containers used for handling chlorine.