Chennai, Tamil Nadu, India
GST : 33AYHPP7230N1Z2
Verified
Add Review
Our Product / Services
Dynamics of machines lab equipments manufacturer
To determine the natural frequency of undamped torsional vibration of a single rotor shaft system. When the particles of the shaft or disc move in a circle about the axis of the shaft, then the vibrations are known as torsional vibrations. The shaft is twisted and untwisted alternatively and the torsional shear stresses are induced in the shaft. Since there is no damping in the system these are undamped vibrations. Also there is no external force is acting on the body after giving an initial angular displacement then the body is said to be under free or natural vibrations. Hence the given system is an undamped free torsional vibratory system
Additional Information:
Payment Terms : T/T
FLYWHEEL and connecting rod is useful to calculate moment of inertia of connecting rod by oscillation. The effect of flywheel can be observed on oscillations of connecting rod.The apparatus consist of a bearing block mounted on support. This support is fixed on board with the help of nut and bolt. A shaft is fitted in the bearing block, which is free to oscillate. On the side of the bearing block there is an attachment for connecting rod. And on the other side of the bearing block flywheel can be attached.
Additional Information:
Payment Terms : T/T
A four-bar linkage also called a four-bar, is the simplest movable closed chain linkage.Kinematic Mechanismconsists of four bodies, called bars or links, connected in a loop by four joints.
Single slider crank mechanism:When one of turning pairs of a four bar chain is replaced by sliding pair, it becomes a single slider crank chain.
Double slider crank mechanism:The double slider-crank linkage has four links joined in a kinematic chain consisting of two revolute joints and two sliding or prismatic joints.
Features
Additional Information:
Payment Terms : T/T
Owing to our domain expertise and the assistance of a dedicated workforce, we are engaged in offering best qualityStatic and Dynamic Balancing Apparatusat the most affordable market price. Offered products are manufactured under strict supervision in accordance with the industry set norms and parameters. Appreciated for their sturdy construction, minimum electricity consumption and hassle-free operation, these products are highly demanded among the clients.
Technical Description:
Learning Objectives/Experiments:
Control Panel:
Scope of Delivery:
Dynamic Balancing Machine Manufacturer in Tamilnadu, Dynamic Balancing Machine Manufacturer in Chennai, Dynamic Balancing Machine Manufacturer in Kanchipuram, Dynamic Balancing Machine Manufacturer in Tiruvallur, Dynamic Balancing Machine Manufacturer in Cuddalore, Dynamic Balancing MachineManufacturer in Villupuram, Dynamic Balancing Machine Manufacturer in Vellore, Dynamic Balancing Machine Manufacturer in Tiruvannamalai, Dynamic Balancing Machine Manufacturer in Salem, Dynamic Balancing Machine Manufacturer in Namakkal, Dynamic Balancing Machine Manufacturer in Dharmapuri, Dynamic Balancing Machine Manufacturer in Erode, Dynamic Balancing Machine Manufacturer in Coimbatore, Dynamic Balancing MachineManufacturer in The Nilgiris, Dynamic Balancing Machine Manufacturer in Thanjavur, Dynamic Balancing Machine Manufacturer in Nagapattinam, Dynamic Balancing Machine Manufacturer in Tiruvarur, Dynamic Balancing MachineManufacturer in Tiruchirappalli, Dynamic Balancing Machine Manufacturer in Karur, Dynamic Balancing Machine Manufacturer in Perambalur, Dynamic Balancing Machine Manufacturer in Pudukkottai, Dynamic Balancing MachineManufacturer in Madurai, Dynamic Balancing Machine Manufacturer in Theni, Dynamic Balancing Machine Manufacturer in Dindigul, Dynamic Balancing Machine Manufacturer in Ramanathapuram, Dynamic Balancing MachineManufacturer in Virudhunagar, Dynamic Balancing Machine Manufacturer in Sivagangai, Dynamic Balancing Machine Manufacturer in Tirunelveli, Dynamic Balancing Machine Manufacturer in Thoothukkudi, Dynamic Balancing Machine Manufacturer in Kanniyakumari, Dynamic Balancing Machine Manufacturer in Krishnagiri, Dynamic Balancing Machine Manufacturer in Ariyalur, Dynamic Balancing Machine Manufacturer in Tiruppur
Additional Information:
Payment Terms : T/T
| EPICYCLIC GEAR TRAIN APPARATUS |
| Gear Train is any combination of gear wheels by which motion is transmitted from one shaft to another shaft. In epicyclic gear trains, the axes of shafts on which the gears are mounted may move relative to a fixed axis. It is a motorized unit consisting of a SUN gear mounted on input shaft. Two plane gear meshes with the annular gear. These planet gears are mounted on a common arm to which output shaft is fitted. Loading arrangement is provided for loading the system and to measure holding torque. |
Additional Information:
Payment Terms : T/T
In a rotating shaft at which instability occurs is calledWhirling of Shaftor critical speed. When shaft reaches critical speed it will have maximum deflection. It is applicable in power transmitting equipment like a turbine, propeller shafts, etc.
Features:
Additional Information:
Payment Terms : T/T
We are market leaders in manufacturer and supplier ofDynamic Balancing Machine. It has an AC motor with variable speed, which drives the balancing machine through a belt drive system.
Specifications:
Additional Information:
Payment Terms : T/T
The apparatus is designed to study theCam Analyzerprofiles and performance of cam and follower system. A shaft supported by ball bearings upon which three different types of cams can be mounted.
Features:
Additional Information:
Payment Terms : T/T
The Pin And Disc wear Apparatus consists of a steel disc whose top surface is case hardened and ground. The disc is rotated by a single ph. Induction motor at 3 different speeds. The test pin is inserted in a pin guide so that one end of pin touches the rotating disc. The pin guide is mounted on a cantilever to which spring balance is attached.
The pin is inserted in the pin guide. The disc is set to rotate at the required speed. The required load is put over the pin and wear of the pin is measured for a time interval of 5 minutes. Different materials can be tested at different speeds, bearing pressures and either lubricated or non lubricated form.
Additional Information:
Payment Terms : T/T
Gyroscope Discis designed to verify the gyroscopic rules of a plane rotating disc The set up consists of heavy stainless steel disc mounted on a horizontal shaft, rotated by a variable speed motor. Rotor disc can be move about three axis.
Features:
Additional Information:
Payment Terms : T/T
The apparatus provided comprehensive unit to perform the vibration experiments. A universal frame is provided upon which quick and easy assembly of various experiments can be done. The unit is self-contained to safely store spares. The students can easily assemble the experiments and study the theory of vibrations practically.
Additional Information:
Payment Terms : T/T
Cantilever:
Free-Free beam:
Simply supported beam:
Additional Information:
Payment Terms : T/T
Dimension 300 x 250 x 400 mm the entire system is mounted on a heavy duty frame which is embedded with multi springs to absorb the shock generated while reciprocation is in action with reciprocating system duly fixed on the frame and driven through dc motor with variable rpm level and duly indicated through the digital rpm monitor.
Additional Information:
Payment Terms : T/T
Our organization has gained name and fame in the field of offeringGear Modelto the clients. There is a unique and diverse range of these gear modulation available with our organization. These are available in excellent technical specifications and are renowned for their hassle free performance for long period of time. In addition to this, following gears are available at legitimate prices to the clients.
Additional Information:
Payment Terms : T/T
TURN TABLE APPARATUS
The set-up is developed for the students of Mechanical Engg., to experimentally determine the Moment of Inertia of a Disk Ring in rotational motion.
Additional Information:
Payment Terms : T/T
Journal Bearing Apparatusfor investigating the distribution of pressure in slide bearings illustrates the principle of hydrodynamic lubrication. The distribution of pressure and the carrying capacity can be determined on a sliding bearing model at different bearing loads and speeds. The sliding bearing consists of a bearing journal driven by an electrical motor and the freely moving bearing housing. The bearing is loaded with different, interchangeable weights. The setup contains manometer tubes, dc motor, dc drive to control speed, set of weights, oil tank, Journal bearing along with the shaft.
Dynamics Of Machines Lab Equipments Manufacturer
Specification:
To determine transmissibility of forced vibrations and to analyze all types of Vibrations with its frequency and amplitude
Motor:1/6 HPSpeed:2800 Rpm With Digital Rpm IndicatorDimension:L B H 1000 X 700 X 950 ApproxOverall Weight:60 Kg (Approx.)
Additional Information:
Payment Terms : T/T
