Geotechnical Testing Equipment #1504667

"sand pouring cylinder as per issize: 4 (100mm) complete set""sand pouring cylinder as per issize: 6 (150mm) complete set"

keywordsand pouring cylinder distributor in chennai, supplier of sand pouring cylinder in chennai, manufacture of sand pouring cylinder in tamilnadu.

.

California Bearing RatioTo knowCalifornia Bearing Ratio Test Field TypeValues in situ, it is useful in determining the load carrying capacity in the field when in-place density and water contents are such that the degree of saturation is 80 % or greater, when material is conhensionless and coarse grained, such that it is not effected by changes in water contents and when the material has been in-place for considerable time. The loading is effected by means of a mechanical load frames which can be fixed to the under side of a truck.Salient Features Specifications: Mechanical screw loading jack, 10, 000 kg. capacity with U-bracket and swivel head. Penetration piston, 50 mm dia. threaded at the upper end. Extension rods consisting of 2 lengths 5 cm. 2 lengths 10 cm., 1 length 30 cm., 1 length 50 cm., and 1 length 100 cm., used as spacers between the proving ring and penetration piston. The lengths are machined from steel tubing. Connector set, has eight connectors for coupling the penetration piston and proving ring assembly either directly or through extension pieces. Dial gauge support of seamless pipe construction. It stands 30 cm high and 45 cm wide at the base. Provided with a quick release screw type clamp capable of sliding and locking anywhere along 2 meter length of the bridge. Supplied with annular metal weight 5 kg., 250 mm dia with 53 mm dia central hole, Slotted metal weight 5 kg., 215 mm to 250 mm dia with 53 mm dia slot, 2 Nos. Slotted metal weights, 10 kg., 215 mm to 250 mm dia with 53 dia slot 2 Nos.Accessories : Dial guage 0.01mm x 25mm. High sensitivity Proving Ring 5000kg. capacity with calibration chart and carrying case. Taag:California Bearing Ratio Test Field Type CBR (California Bearing Ratio Tes) -Hand Operated California Bearing Ratio Apparatus (Motorised), California Bearing Ratio Test Field Type Dealer in Chennai, California Bearing Ratio Test Field Type Distributor in Chennai, California Bearing Ratio Test Field Type manufactor in ChennaiCalifornia Bearing Ratio Test Machine in Tamilnadu, California Bearing Ratio Test Machine in Chennai, California Bearing Ratio Test Machine in Kanchipuram, California Bearing Ratio Test Machine in Tiruvallur, California Bearing Ratio Test Machine in Cuddalore, California Bearing Ratio Test Machine in Villupuram, California Bearing Ratio Test Machine in Vellore, California Bearing Ratio Test Machine in Tiruvannamalai, California Bearing Ratio Test Machine in Salem, California Bearing Ratio Test Machine in Namakkal, California Bearing Ratio Test Machine in Dharmapuri, California Bearing Ratio Test Machine in Erode, California Bearing Ratio Test Machine in Coimbatore, California Bearing Ratio Test Machine in The Nilgiris, California Bearing Ratio Test Machine in Thanjavur, California Bearing Ratio Test Machine in Nagapattinam, California Bearing Ratio Test Machine in Tiruvarur, California Bearing Ratio Test Machine in Tiruchirappalli, California Bearing Ratio Test Machine in Karur, California Bearing Ratio Test Machine in Perambalur, California Bearing Ratio Test Machine in Pudukkottai, California Bearing Ratio Test Machine in Madurai, California Bearing Ratio Test Machine in Theni, California Bearing Ratio Test Machine in Dindigul, California Bearing Ratio Test Machine in Ramanathapuram, California Bearing Ratio Test Machine in Virudhunagar, California Bearing Ratio Test Machine in Sivagangai, California Bearing Ratio Test Machine in Tirunelveli, California Bearing Ratio Test Machine in Thoothukkudi, California Bearing Ratio Test Machine in Kanniyakumari, California Bearing Ratio Test Machine in Krishnagiri, California Bearing Ratio Test Machine in Ariyalur, California Bearing Ratio Test Machine in Tiruppur

A simple and robust instrument for rapid in-situ measurement of the structural properties of road pavements Provides fast and efficient method of obtaining information For continuous measurements up to a depth of 800 mm and 1, 200 mm with the extension rod.Portable and can be accommodated in a carrying case A typical test takes only a few minutes and the instrument therefore, provides a very efficient method of obtaining information which would normally require test-pits. Correlations have been established between measurements with DCP and California Bearing Ration (CBR) so that the results can be interpreted and compared with CBR specifications for pavement design. Agreement is generally good over most of the range but differences are apparent at low values of CBR, especially for fine grained materials.It incorporates a 8 Kg weight dropping through a height of 575 mm and a 60 deg.Dynamic Cone Penetration Test Apparatus Manufacturer in Chennai, Dynamic Cone Penetration Test Apparatus Dealer in Chennai, Dynamic Cone Penetration Test Apparatus Shop in Chennai, Dynamic Cone Penetration Test Apparatus Supplier in Chennai, Dynamic Cone Penetration Test Apparatus Price in Chennai Dynamic Cone Penetration Test Apparatus Manufacturer in Tamilnadu, Dynamic Cone Penetration Test Apparatus Manufacturer in Chennai, Dynamic Cone Penetration Test Apparatus Manufacturer in Kanchipuram, Dynamic Cone Penetration Test Apparatus Manufacturer in Tiruvallur, Dynamic Cone Penetration Test Apparatus Manufacturer in Cuddalore, Dynamic Cone Penetration Test Apparatus Manufacturer in Villupuram, Dynamic Cone Penetration Test Apparatus Manufacturer in Vellore, Dynamic Cone Penetration Test Apparatus Manufacturer in Tiruvannamalai, Dynamic Cone Penetration Test Apparatus Manufacturer in Salem, Dynamic Cone Penetration Test Apparatus Manufacturer in Namakkal, Dynamic Cone Penetration Test Apparatus Manufacturer in Dharmapuri, Dynamic Cone Penetration Test Apparatus Manufacturer in Erode, Dynamic Cone Penetration Test Apparatus Manufacturer in Coimbatore, Dynamic Cone Penetration Test Apparatus Manufacturer in The Nilgiris, Dynamic Cone Penetration Test Apparatus Manufacturer in Thanjavur, Dynamic Cone Penetration Test Apparatus Manufacturer in Nagapattinam, Dynamic Cone Penetration Test Apparatus Manufacturer in Tiruvarur, Dynamic Cone Penetration Test Apparatus Manufacturer in Tiruchirappalli, Dynamic Cone Penetration Test Apparatus Manufacturer in Karur, Dynamic Cone Penetration Test Apparatus Manufacturer in Perambalur, Dynamic Cone Penetration Test Apparatus Manufacturer in Pudukkottai, Dynamic Cone Penetration Test Apparatus Manufacturer in Madurai, Dynamic Cone Penetration Test Apparatus Manufacturer in Theni, Dynamic Cone Penetration Test Apparatus Manufacturer in Dindigul, Dynamic Cone Penetration Test Apparatus Manufacturer in Ramanathapuram, Dynamic Cone Penetration Test Apparatus Manufacturer in Virudhunagar, Dynamic Cone Penetration Test Apparatus Manufacturer in Sivagangai, Dynamic Cone Penetration Test Apparatus Manufacturer in Tirunelveli, Dynamic Cone Penetration Test Apparatus Manufacturer in Thoothukkudi, Dynamic Cone Penetration Test Apparatus Manufacturer in Kanniyakumari, Dynamic Cone Penetration Test Apparatus Manufacturer in Krishnagiri, Dynamic Cone Penetration Test Apparatus Manufacturer in Ariyalur, Dynamic Cone Penetration Test Apparatus Manufacturer in Tiruppur

Conforming to specifications and tolerance in accordance to I.S. 2720 Part XXXI consists of followings:

• Loading jack with `U` bracket capacity 100 KN (10000 kgf.) specially designed for use with field C.B.R. test apparatus carries a hand operated two speed screw jack fitted with `U`bracket. A hexagonal adaptor is provided to fix a proving ring. A thrust bar, which passes through the `U` bracket, is screwed on to a proving ring, which protects the proving ring when the loading is eccentric.
• Swivel head for the loading jack.
• Extension set, consisting of 1 length of 5cm, 2 length of 10cm, 1 length of 30cm, 1 length of 50cm and one length of one meter used as spacers between the proving ring and penetration piston.
• Connector set having eight connectors for coupling the penetration piston and proving ring assembly.
• Datum bar assembly consisting of two stands and one mtr long bar.

Adjustable bracket for dial gauge.

• Annular metal weight 5 kg, 250mm dia with 53mm dia hole.
• Slotted weight, 5 kg 215 to 250mm diam with 53mm dia slot
• Slotted weight 10 kg, 215 to 250mm dia with 53mm dia slot.
• Proving ring capacity 5000 kgf (50 KN) fitted with dial gauge 0.002mm with calibration certificate.
• Dial gauge for strain measurement 0.01mm x 25mm travel.

The apparatus consists one each of compaction mould gun metal/ M.S., 100 mm i. D. X 127. 3 mm height x 1000 cc. Volume, complete with collar and base plate. Rammer 2. 6 kg x 310 mm controlled fall.

We are offering a quality rangeTest Sieves, which are widely appreciated for high consistency, fit and stable functions. These are sourced from reliable vendors of the industry and are offered in customized solutions to meet client's requirements and specifications. Our range of Test Sieves are manufactured for various Household and Industrial usages.

Specifications:

B.S.S(410/1969)Mesh Nos	A.S.T.M(11-70)Mesh Nos	Indian Std(469 / 1972)	Microns
4	5	4.00mm	4000
5	6	3.35mm	3353
6	7	2.80mm	2812
7	8	2.36mm	2411
8	10	2.00mm	2057
10	12	1.70mm	4000
12	14	1.40mm	1405