Chennai, Tamil Nadu, India
GST : 33AYHPP7230N1Z2
Verified
Add Review
Our Product / Services
Heat Transfer Through Composite Wall
We are the leading manufactures and suppliers of Heat Transfer Through Composite Wall in Coimbatore, Mettupalayam, chennai, Salem, Tirupur, Pollachi, Trichy, Salem, Erode, Madurai, Tirunelveli , Chennai, Nagarkovil, Kanniyakumari, Tuticorin, Namakkal, Vellore, Theni, Dindugul, Ooty, Kunoor, Valparai, Kodaikanal, Kannur, Kozhikode, Malappuram, Palakkad, Wyanad, Kasargod, Kalpatia, Thrissur, Eranakulam, Iduki, Kootayam, Alapuzha, Kollam, Thiruvananthapuram, Patmanathitta, Kurnool, Anantapur, Cuddapah, Nellore, Chitoor, Prakasam, Guntur, Krishna, West Godaveri, East Godaveri, Vishakapattinam, Chikmangalur, ChitraDurga, Hassan, Tumkur, Mandya, Bangalore, Kodagu, Mysore, Kolar, jaipur, sikkar, Delhi, Rajkot, Srinagar, Tamilnadu, Karnataka, Andrapradesh, Kerala, ArunachalPradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Telangana, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Island, Chandigarh, Lakshadweep, Puducherry and India.
Additional Information:
Payment Terms : T/T
Parralel and Counter Flow Heat Manufacture in Tamilnadu
A double pipe heat exchanger can be operated in parallel flow mode as shown in the diagram at the left. Similarly a shell and tube heat exchanger can be operated in approximately parallel flow by having both fluids enter at one end and exit at the other end. With parallel flow the temperature difference between the two fluids is large at the entrance end, but it becomes small at the exit end as the two fluid temperatures approach each other. The overall measure of heat transfer driving force, the log mean temperature difference is greater for counter flow, so the heat exchanger surface area requirement will be larger than for a counter flow heat exchanger with the same inlet and outlet temperatures for the hot and the cold fluid.
Parallel Flow and Counter Flow Apparatus Dealer in Chennai, Parallel Flow and Counter Flow Apparatus Shop in Chennai, Parallel Flow and Counter Flow Apparatus Supplier in Chennai, Parallel Flow and Counter Flow Apparatus Price in Chennai
Parallel Flow and Counter Flow Apparatus Manufacture in Tamilnadu, Parallel Flow and Counter Flow Apparatus Manufacture in Chennai, Parallel Flow and Counter Flow Apparatus Manufacture in Kanchipuram, Parallel Flow and Counter Flow Apparatus Manufacture in Tiruvallur, Parallel Flow and Counter Flow Apparatus Manufacture in Cuddalore, Parallel Flow and Counter Flow Apparatus Manufacture in Villupuram, Parallel Flow and Counter Flow Apparatus Manufacture in Vellore, Parallel Flow and Counter Flow Apparatus Manufacture in Tiruvannamalai, Parallel Flow and Counter Flow Apparatus Manufacture in Salem, Parallel Flow and Counter Flow Apparatus Manufacture in Namakkal, Parallel Flow and Counter Flow Apparatus Manufacture in Dharmapuri, Parallel Flow and Counter Flow Apparatus Manufacture in Erode, Parallel Flow and Counter Flow Apparatus Manufacture in Coimbatore, Parallel Flow and Counter Flow Apparatus Manufacture in The Nilgiris, Parallel Flow and Counter Flow Apparatus Manufacture in Thanjavur, Parallel Flow and Counter Flow Apparatus Manufacture in Nagapattinam, Parallel Flow and Counter Flow Apparatus Manufacture in Tiruvarur, Parallel Flow and Counter Flow Apparatus Manufacture in Tiruchirappalli, Parallel Flow and Counter Flow Apparatus Manufacture in Karur, Parallel Flow and Counter Flow Apparatus Manufacture in Perambalur, Parallel Flow and Counter Flow Apparatus Manufacture in Pudukkottai, Parallel Flow and Counter Flow Apparatus Manufacture in Madurai, Parallel Flow and Counter Flow Apparatus Manufacture in Theni, Parallel Flow and Counter Flow Apparatus Manufacture in Dindigul, Parallel Flow and Counter Flow Apparatus Manufacture in Ramanathapuram, Parallel Flow and Counter Flow Apparatus Manufacture in Virudhunagar, Parallel Flow and Counter Flow Apparatus Manufacture in Sivagangai, Parallel Flow and Counter Flow Apparatus Manufacture in Tirunelveli, Parallel Flow and Counter Flow Apparatus Manufacture in Thoothukkudi, Parallel Flow and Counter Flow Apparatus Manufacture in Kanniyakumari, Parallel Flow and Counter Flow Apparatus Manufacture in Krishnagiri, Parallel Flow and Counter Flow Apparatus Manufacture in Ariyalur, Parallel Flow and Counter Flow Apparatus Manufacture in Tiruppur
Additional Information:
Payment Terms : T/T
The unit consists of a guarded hot plate assembly formed by a central heater and switched between the lower and upper plates and rings. Two identical specimen of the material to be tested are clamped between the two cooling plates and the heater plate assembly. Heater input to central heater measured by voltmeter and ammeter giving the heat flow rate across the specimen. Thermocouple is placed in heater and cooling plated to measure the temperature difference across the specimen
Additional Information:
Payment Terms : T/T
The unit consists of two thin wall concentric copper spheres. The inner sphere house the heating coil. Heating coil is made up of nichrome wire wound on mica sheet. The insulating powder packed between two shells. Power supply to the heater is given through a dimmerstat& is measured by voltmeter & an ammeter. Temperature can be measured with the help of thermocouples. Four thermocouple are embedded on inner sphere and six thermocouples are embedded on outer sphere. The entire ten temperature indicator, these reading enable of insulating powder.
Additional Information:
Payment Terms : T/T
The unit consists of a copper bar, which is heated at one end, a heat sink is provided at other end. The test section of bar is properly insulated and along the length of bar, thermocouples are attached. Heat conducted through the section of bar is measured by heat collection in water cooled heat sink. A panel comprising of controls and measurements is provided, which provides easy operation and study mounting of unit
Additional Information:
Payment Terms : T/T
TheHeat Transfer through Composite Wallconsists of a heater sandwiched between two sets of slabs. Three types of slabs are provided on either side of the heater, which forms a composite structure. A small hand press frame is provided to ensure the perfect contact between the slabs. A variac is provided for varying the input to the heater. Digital Voltmeter and Digital Ammeter display the heat input. Heat produced by heater flows axially on both the sides. Temperature Sensors are embedded at the interfaces of slabs to determine the temperature gradient. The experiment can be conducted at various values of heat input and calculation can be made accordingly.
Additional Information:
Payment Terms : T/T
Vortex tube assembly
2. Pressure control valve.
3. Two Separate Chambers.
4. Nozzle, Diaphragm & orifice assembly
5. Set of thermocouples.
Additional Information:
Payment Terms : T/T
Consisting of Hot plate and Cold plate assembly, heater of suitable capacity, chromel-alumel thermocouples, power measurement, digital temperature indicator, flow measurement, heat regulation by electronic voltage regulator and insulation
Additional Information:
Payment Terms : T/T
Helical coils are used for heating or cooling in process tanks. When a fluid flows through a curved tube, centrifugal force acting upon the various elements of fluid moving with different velocities causes secondary circulation. Secondary flow results in higher heat transfer characteristics. Further, secondary flow stabilizes the laminar flow leading to a higher critical Reynolds number for transition from laminar to turbulent flow.
Additional Information:
Payment Terms : T/T
This unit is made of fiber reinforced plastics, consists of a blower, packing material for increasing the contact between water and air, water re circulation pump with a sump tank connected with a heater. The temperature of the in& outlet water. Wet bulb thermometer is provided to measure the moisture content in the outlet air thereby can be used to measure evaporation losses.
Additional Information:
Payment Terms : T/T
The whole set-up is well designed and arranged in a good quality painted structure having the tube light arrangement
Stop Watch
Electronic
Material Borosilicate Glass tube
Gate Valves
6 Nos. (2 Nos. on each Tube)
Tubes (3 Nos.)
Additional Information:
Payment Terms : T/T
The apparatus is designed to determine the Stefan Boltzman constant.
The apparatus consists of a hemisphere fixed to a Bakelite plate, the outer surface of which forms the jacket to heat it.
Hot water to heat the hemisphere is obtained form a hot water tank, which is fixed above the hemisphere. The copper test disc is introduced at the center of hemisphere.
The temperatures of hemisphere and test disc are measured with the help of temperature sensors.
The whole set-up is ingeniously designed and schematically arranged on a powder-coated rigid structure
Additional Information:
Payment Terms : T/T
The unit consists of a three concentric pipes of a very small thickness as compared to diameter. They are arranged concentrically over two supports and closed with the help of two disces. The annual in between the cylinders are filled completely by two different insulating materials. Thermocouples at proper position are used to measure the temperature. Inside the inner pipe a nicrome wire heater is placed. Heat input to the heater is given through a variac and measured by a voltmeter and ammeter.
Additional Information:
Payment Terms : T/T
The setup consists of an electrically heated Steam Generator (boiler) of about 10ltrs capacity. Steam is allowed into the drop wise & film wise condensation chambers. The Drop wise condensation chamber consists of a Gold plated copper tube housed in a Glass enclosure. Film wise condensation chamber consists of an identical copper tube. Cooling water is circulated inside the tubes for Condensation, with the help of a Monoblock pump. Heat input and temperatures are measured by Digital Indicators
Additional Information:
Payment Terms : T/T
The set up consists of a column fitted with perforated plates. Liquid is fed at the top of the column through distributor. The solute gas and air are measured separately, mixed in a mixing chamber and then passed through the perforated plates vertically upward and absorbed in liquid. All the flow rates can be independently varied to simulate different conditions. Liquid Sample can be taken out from the bottom of the column for analysis
Additional Information:
Payment Terms : T/T
Heat Transfer Through Composite Wall
We are the leading manufactures and suppliers of Heat Transfer Through Composite Wall in Coimbatore, Mettupalayam, chennai, Salem, Tirupur, Pollachi, Trichy, Salem, Erode, Madurai, Tirunelveli , Chennai, Nagarkovil, Kanniyakumari, Tuticorin, Namakkal, Vellore, Theni, Dindugul, Ooty, Kunoor, Valparai, Kodaikanal, Kannur, Kozhikode, Malappuram, Palakkad, Wyanad, Kasargod, Kalpatia, Thrissur, Eranakulam, Iduki, Kootayam, Alapuzha, Kollam, Thiruvananthapuram, Patmanathitta, Kurnool, Anantapur, Cuddapah, Nellore, Chitoor, Prakasam, Guntur, Krishna, West Godaveri, East Godaveri, Vishakapattinam, Chikmangalur, ChitraDurga, Hassan, Tumkur, Mandya, Bangalore, Kodagu, Mysore, Kolar, jaipur, sikkar, Delhi, Rajkot, Srinagar, Tamilnadu, Karnataka, Andrapradesh, Kerala, ArunachalPradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Telangana, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Island, Chandigarh, Lakshadweep, Puducherry and India.
Additional Information:
Payment Terms : T/T
The basic unit consists of two columns, one contains cation resin and the other contains anion resin. The feed water is pumped by a FHP pump and the capacity of the ion exchanger is 50 lph.
Additional Information:
Payment Terms : T/T
The test plate comprises a mica heater sandwiched between two circular plates. Black plate is identical with test plate, but its surface is blackened. As all the physical properties, dimension and temperature are equal heat losses from both plates will be same except radiation loss. Hence the input difference will be due to the difference in emissivity. Both plates are supported on individual brackets in an enclosure with one side glass to ensure steady atmospheric conditions. Temperature Sensors are provided to measure the temperature of each plate and surrounding. Electric Supply is given to heaters through separate variances so that temperatures of both can be kept equal and is me assured with Digital Voltmeter and Digital Ammeter.
Additional Information:
Payment Terms : T/T
To study the characteristics of Steam Distillation
The feed in the still is heated externally by heater. The vapous form the top of the vessel is condensed in the type condenser by circulating cooling water. Temperature of the feed mixture is controlled by means of a digital temperature Controller. The condensate is collected in a receiver
Additional Information:
Payment Terms : T/T
The unit consists of 3 identical cylindrical conductors in respect of geometry. One end of these is heated electrically while there are small capacity tanks acting as heat sinks at the other end. The unit consists of a heat pipe, a copper pipe & stainless steel pipe.
Thermocouples are embedded along the lengths to measure the temperature distribution & the heat transfer rate is noted in terms of the temperature rise in the heat sink tanks
Additional Information:
Payment Terms : T/T
