Our Products
Worlds First Solar Hybrid Cooking System for all cooking needs:Several static concentrators of 32 sq. m. reflecting / concentrating solar rays on one receiver each.The Thermic fluid heated in the receivers due to solar energy goes to Hot oil storage tank. The system is connected with Thermic Fluid Storage tanks and Hot oil pipelines that in turn are inter-connected with the boiler and cooking vessels for all your cooking needs.
Applications in Gurudwara serving Langar, Residential Schools, Mid-Day Meal program, Military andDefenceteamsdeployed in remote and urban areas, hotels, Jails, Institutions, Industriesproviding Canteen facilities to Employees, Temples, Ashrams and many more catering to more than 200 to Several Thousands Persons daily.
Seen in photo here are several static concentrators reflecting / concentrating solar rays on one receiver each.
TSS reserves the rights for any improvements in the above specifications, which can lead to higher efficiency and cost reduction of the system.
By using Thermo siphon Technology.In Thermo Siphoning Technology the water is fed through feed water line to the receiver which comes from the storage tank and the outlet of the receiver sends the water back to the storage tank (small systems).
In Pressurized Hot Water applications the water is pumped by pressure so the phase change does not occur due to high temperatures.
Applications?Unlike flat plate collectors, due to high temperature at the receiver the thermo siphoning is much faster and there is no blockages in the tubes or freezing of water.
TSS reserves the rights for any improvements in the above specifications, which can lead to higher efficiency and cost reduction of the system.
Solar parabolic dish concentrator concentrates radiations of sun on receiver all the day from 9 a.m. to 6 p.m. It tracks the radiations of Sun through automated tracking device, which rotates the parabolic dish along axis of rotation of Sun. Parabolic dish consists of set of solar grade mirrors of rectangular shape or high reflective Solar grade Mirror. Normally, parabolic dish for industrial applications has an area of 16 or 32 sq. m. of elliptical shape.
SOLAR STEAM COOKING SYSTEMTechnology Parabolic Concentrators:
Each parabolic concentrator of the system has a reflector frame fitted with reflecting Solar Grade mirrors, rotating support and a stand. The concentrators are installed in such a way that they focus the sunlight on to the receivers while in operation which will be attached to a steam header/ tank. The concentrators are tracked automatically with the help of suitable tracking arrangement. The concentrators are installed in series and parallel combination connected to different steam headers/ tanks depending on the size of the system. Each unit of concentrators is connected in series and has its own tracking arrangement. The stands of the concentrators are properly grouted. The tracking arrangement is such that once adjusted in the morning with the help of drive motor, the concentrators will automatically track the Sun at least in one direction i.e. in E-W, thereby focusing all the Sun light exactly on the receivers connected to the header.
For cooking application water is supplied to the receiver through thermo-siphoning process and with the help of solar heat steam is generated. The steam from all the receivers is collected in steam header with the pressure of more than 2 bars. Once the steam is accumulated there after it is used for cooking application.
Steam Header/ Drum Assembly and Instrumentation:
Each steam header assembly is connected to a group of concentrators that consists of a steam header/ tank connected to receiver (circular in shape), pressure reducing station, steam and feed water pipelines and necessary valves. The designs of the receivers are such that they work on thermo- siphon principle and the water stored in the header is slowly converted into steam when the system is put into operation. It has a drain arrangement for cleaning against scale formation. The pressure reducing station is so designed that it reduces the pressure of steam generated in the header from 10 Kg/cm2 to 2-4 Kg/cm2 so as to ensure safety of the user while using the steam. The system pipelines, receivers and steam header are insulated with glass wool/ rock wool covered by aluminium cladding to minimize heat losses. The system is hydro tested for any leaks before insulating its various components. Feed water tank of suitable capacity, instrumentation e.g. pressure gauge and water level and temperature indicators, level controller, safety valves, steam separators are installed with the system for safety and measuring different parameters.
Solar Steam Generating System For Industrial Use?Solar thermal is getting remarkable popularity inindustrial applications. Solar thermal is an alternative to generate electricity, process chemicals or even space heating. It can be used in non-metallic, textile, dairy, chemical or even process related industries.
The steam generated by solar energy is sent to common header, which is in turn sent to process application. Normally, the solar system is connected before the boiler / heat source, so there is no effect on the process application.
TSS reserves the rights for any improvements in the above specifications, which can lead to higher efficiency and cost reduction of the system.
The Waste water will be pumped on a Metal Open tray (painted with absorber paint) through a simple pump and from there it will be falling on the Receiver by gravity. The receivers will be heated by concentrating solar energy. The temperatures on the Receivers will be more than 1, 000 C.
The falling water on the receivers will start evaporating and the rest of the water which is not evaporated will be heated up. The heated water will fall again in the nearby Solar Pond through a sprinkler system and the cycle will be repeated continuously.
To control the flow of water, we will be installing level indicator with a controller to make the process completely automatic.
TSS reserves the rights for any improvements in the above specifications, which can lead to higher efficiency and cost reduction of the system.
Solar Direct Cooking Systemconsists of concentrating reflector that moves to track the movement of the Sun. In TSS Direct Cooking System the reflected and concentrated Sunlight enters a nearby kitchen directly through a secondary reflector to fall ona cooking pot or frying surface.
Each morning, the operator rotates the concentrating reflector back to a starting position in which the reflected beam is aligned with the axis of rotation of the reflector, and starts the tracking mechanism (Electronic). Every few days the operator adjusts the angle between the axis of rotation and the concentrating reflector to accommodate the seasonal variation in the height of the Sun. Once the reflected beam is aligned with the axis of rotation of the concentrating reflector and the timer is in motion, the reflected beam remains aligned with the axis of rotation all the day. The reflecting surface of the concentrating reflector consists of a number of facets, usually flat solar grade mirrors. A concrete pad and a welded steel space frame provide support for the concentrating reflector. The area of the concentrating reflectors in the configurations shown here is usually about10 sq. m. or 16 sq. m.
Silent features of TSS Solar Direct Cooking System:Applications in Residential schools, mid-day meal program, defenceteams deployed in remote and urban areas, hotels, institutions, industries providing canteenfacilities to employees, temples and many morecatering to less than 200 personsdaily.
TSS reserves the rights for any improvements in the above specifications, which can lead to higher efficiency and cost reduction of the system.
SK - 28 Solar Dish Cooker works likea Direct Solar Cooking System consists ofSolar Grade mirrorsthatmove to track the movement of the Sun.
Each morning, the operator rotates the concentrating reflector back to a starting position in which the reflected beam is aligned with the axis of rotation of the reflector, and starts electronic panel. Every few days the operatoradjusts the angle between the axis of rotation and the concentrating reflector to accommodate the seasonal variation in the height of the Sun.Once the reflected beam is aligned with the axis of rotation of the concentrating reflector and the timer is on, the reflected beam remains aligned with the axis of rotation all day. Thereflecting surface of the concentrating reflector consists of a number offacets, usually flat glass mirrors. The reflecting area of the dish is 2.8 Sq. M.
One can fry, roast, bake, and boil with this system.
Compared with gas, electric and solar water heaters, air source heat pump can provide all-weather hot water with low energy cost. Together with Shanghai Jiao Tong University and other research institutions, Linuo Paradigma has developed a series of heat pump products for both residential and commercial applications and manufactured by the new established production line in Qingpu industrial park, Shanghai, China. All those products adopt world-leading Copeland compressor and high-efficiency heat exchanger, and are manufactured by ISO9001 facilities with strict performance test before ex-factory. The 4.0 COP (Coefficient of performance) of our heat pump system means the operation cost is only 1/4, 1/3 and 2/3 of the electric, gas and solar water heaters. Besides economical efficiency, heat pump system also has advantages on safety issues since avoiding of electric leakage, heat without water, gas explosion and carbon monoxide poisoning. The air source could be used in 24 hours/day and all weather conditions, which creates air source heat pump the new generation of green energy water heaters.
Linuo Ritter International distributes highly efficient evacuated tubes. We offer high performance evacuated tubes with an improved geometry and performance. The evacuated tubes consists of two concentric glass tubes which are sealed in a semi-circular shape on one side and are joined to one another on the other side. The space between the tubes is evacuated and hermetically sealed (evacuated insulation). To use solar energy, the internal glass tube is coated with an environmentally friendly, highly selective layer on the outside, thus turning it into an absorber. The selective coating is protected in the evacuated space. The aluminum nitride sputter coating used is characterized by an extremely low emission and a high absorption rate.
Easily Portable and easy to operate.