We have an exclusive range of Thermal Overload Relay offering to our clients. These relays are used to protect the electrical motors from overload in case of any electrical fault. Offered Thermal Overload Relays can be manually set to various...
RK VOLUME BOOSTERS are normally used to reproduce pneumatic signals in 1:1 ratio whenever input isolation or increased flow capacity is required. These high capicity Volume Booster, with a fixed minimum deadband, are designed to substantially improve the stroking speed of large...
RK AIR LOCK is a reliable unit for achieving stay-put condition of control valves, on air supply failure. The air pressure is blocked inside the diaphragm chamber (or piston cylinder) of the actuator, when the supply air pressure falls below the desired set valve. Quality...
Max. Switching Voltage 250 ~ 277V AC Max. Switching Current 8 ~ 20A Max. Switching Power 2000 ~ 5000VA Coil Voltage 3 ~ 48V DC Coil Power 0.2 ~ 1.2W Electrical Life ( typical ) Refer Contact Load Operating Tempt. -40 to + 85 Deg C Terminal PCB...
VOLOUME BOOSTER is a high volume amplifier used to increase the operating speed of the actuator, preventing the time lags, in the systems where controller & the control valve are separated by extremely long piping runs. VOLOUME BOOSTER receives the low volume signal from the...
Air Lock is used when it is required to automatically hold the air pressure in diaphragm chamber of the actuator, on the same level in an event of failure of air supply. When supply pressure drops below a preset value, the Air Lock Relay locks the...
We are a reputed Manufacturer, Exporter & Supplier of Air Lock Relay . The Air Lock Relay we supply is manufactured by our skilled team using the most advanced technology and superior grade material and parts. The Air Lock Relay offered by us is...
PCB Relays Solid State Relays Power Relays Telecom Relays Latching Relays Automotive Relays Industrial Relays Home Appliances General Control Relay Sockets & Accessories...
Model : Â PCON - PF - 5 It monitors 3 phase supply voltage, Relay remains ON under healthy voltage condition, and during phase failure or phase unbalance (50V +/-5V, Fixed) relay becomes OFFÂ (Refer Fig. 20) Trip time delay : 2-3 Sec, Auto...
 Volume boosters are used to reproduce pneumatic signals in 1: 1 ratio whenever input isolation or increased flow capacity is required. These high capacity Volume Boosters, with a fixed minimum deadband, are designed to substantially improve the...
Size (Inches) : [70(W) x 89(H) x 50 (D)] mm, 35 mm Din Rail or Screw mounting, (Refer Fig. 21)
Supply / Monitoring voltage : 440 VAC, 50/60 Hz.
It monitors 3 phase supply voltage, Relay remains ON under healthy voltage condition, and during phase failure or phase unbalance (50V +-5V, Fixed) relay becomes OFF...
For Buyer 
For Seller 
Help 
