Our Products
This machine is a hot melt adhesive coating machine. The machine has two heads of slot die coating and two melting units. This enables to coat on both sides of the substrate in a single operation. As a result, it gives double production and less wastage.
This machine is designed especially for making sticky insect traps. It has the capacity to hold 300mm wide rolls and coat up to 300mm wide. Along with double coating heads, it has 3 unwinds and 1 rewind.
Two unwinds hold rolls of the release liner. These liners are coated with slot dies. These slot dies are fed with molten glue by two independent melting units. Both melting units have gear pumps for the controlled, constant and measured flow of glue.
After coating on the release liners, both the papers are laminated with the PVC film sandwiched in between. This PVC film is dispensed from the third unwinder. After the lamination, all the three plies are wound at the winding station.
Watch the machine in running :
https://youtu.be/aqrBvo2mE8w
All the unwinders are equipped with magnetic powder brakes and web guiding systems. The rewind station has a magnetic clutch for a taper tension controlled winding.
Additional Information:
Payment Terms : T/T
Delivery Time : 60 days
Main features:1. To extend the design of the distance between the second unwinding and the composite makes the edge effect more ideal.Application:RTS hot melt adhesive lamination machine is mainly used in stickers products, such as stickers trademark paper, double-sided tape, foam tape, cloth tape , Kraft paper tape, the US profile paper tape, fiber tape, etc.Technical parameters:Coating width 400-2500mmCoated cloth amount 10-200 g / Coating speed 80 M / minUnwinding diameter 1000mmWinding diameter 1000mmCorrection device 1setsLength 8400mmHeight 2350mm
Additional Information:
Payment Terms : T/T
Main Characteristics :
Main Characteristics :
This is the Best Indian machine for coating Hot Melt Adhesive Coating. The machine quality is International level. This Hot Melt Coating Machine is controlled by PLC to assure precision control of coating speed and glue amount. This Hot Melt Coating Machine model has coating weight 15 to 600 gsm. The line speed lowers with increase of GSM.This Hot Melt Coating Machine is used as pilot plant in Hot Melt PSA manufacturing, Narrow web coating and for making Hook Loop self adhesive Tape.
Additional Information:
Payment Terms : T/T
Delivery Time : 60 days
Application Range: Double side tapes; Duct tapes; Double side sponge adhesive tapes; Clean adhesive tapes; Masking adhesive tapes; Alu.foil tapes; Fabric tapes; Shoes material; Medical dressing tapes; Sticker Label; Trademark Label; Film, Fabric, Textile, Paper & Lamination .etc.Model: RTSCoating width: 100-2500mmCoating weight: 10-200g/m2Coating speed: 5m to 150m/minUnwind device: 2setsUnwind Diameter: 1000mmCorrection device: 2setRewind Diameter: 1000mmMax temperature: 230Length of machine: 8400mmHeight of machine: 2350mm
Additional Information:
Payment Terms : T/T
Delivery Time : 60 days
Hot Melt Coating Machine is suitable for making packing tape, paper tape, Adhesive sticker, self-adhesive paper and so on.
WHT350 Hot Melt Coating machine adopts PLC and touch screen to operate and can coat the material up to a width of 350mm. The two laminating rollers can be separated and it is easy to clean and adjust.
The machine adopts two cooling rollers to make sure the material can be protected well from the high temperature
Coating method: rotary rod Coating system without scratch
Additional Information:
Payment Terms : T/T
Delivery Time : 60 days
In this type of coating procedure, the coating material is measured onto the applicator roller by precision setting of the gap between the upper metering roller and the application roller. The coating is 'wiped' off the application roller by the substrate as it passes around the support roller at the bottom. The diagram illustrates a 3-roll reverse roll coating process.Trasy Enterprises has developed a hot melt coating machine on this principle. The absence of solvents, volatile parts and water, offers an environmentally friendly operating process, and since no additional heating energy is required to evaporate water or solvent and the curing takes place by ambient air temperature or by the humidity of the ambient air, no drying or curing ovens are necessary.Application Range: Tapes, Laminates of Film, Fabric, Textile, Paper.etc.
Additional Information:
Payment Terms : T/T
Delivery Time : 60 days
Description :
Trasy Enterprises is one of the leading designers and builder of a wide range of HOT MELT COATING machines with all the options mentioned below. We offer coating machines which are fully featured, efficient and affordable. Accurate & precision coating is assured. Our machines are high quality and are designed specifically for use in the flexible packaging and other related industries. HOT MELT COATING MACHINE by Trasy Enterprises was developed in 2006 & exhibited in IIASE'07 exhibition at Nehru Center, Bombay. Application Range: Double side tapes; Duct tapes; Double side sponge adhesive tapes; Clean adhesive tapes; Masking adhesive tapes; Alu.foil tapes; Fabric tapes; Shoes material; Medical dressing tapes; Sticker Label; Trademark Label; Film, Fabric, Textile, Paper & Lamination .etc. Model: HMC SLOT DIE COATING Coating width: 100-1000mm Coating weight: 15-200g/m2 Coating speed: 50m/min Unwind device: 2sets Unwind Diameter: 1000mm Correction device: 2set Rewind Diameter: 1000mm Max temperature: 230 Length of machine: 3400mm Height of machine: 1850mm
Additional Information:
Payment Terms : T/T
Delivery Time : 60 days
Description :
This system produces Self-Adhesive HDPE Membrane Sheet. Which is used for waterproofing as geo-membrane. This product is HDPE self-adhesive waterproofing membrane and consists of HDPE film as basic material, polymer adhesive layer and protection layer (PE film or mineral particle, sand). It is specially designed to underground construction and use tunneling techniques, taking advantage of the strong bonding ability with post-pour concrete. The combination of special non-asphaltic adhesives and polymer sheets makes this material an advantage such as high tensile strength, impact resistance, Anti-corrosion, self-adhesive and easy construction. Cold application, non-flame heat: Strong adhesive ensures excellent adhesion, so no need for hot air welding is necessary. Antimicrobial and mold resistance: This product is theoretically, 100 years of underground use. Safe & environmentally friendly: The floor surface does not need special treatment, the construction process does not require solvents, no fuel in any form and does not require hot air welding. Scope of application: Under ground Parking, Tunnel, Railways, subways, highways, Underground projects, wastewater treatment plants and chemical tanks, Irrigation projects: reservoirs, dams, water channels and artificial lakes.
Additional Information:
Payment Terms : T/T
Delivery Time : 60 days
Application Range: Selective Coating, Dot coating, Pattern Coating on Film, Fabric, Textile, Paper & Lamination .etc.
This coating can be done with various methods. Commonly it was done with reverse roller coating or gravure coating. Gravure coating gives uniform coating but the disadvantage of this coating type is every time you have to change the engraved roller for different grammage of coating. In roller coating the challenge was to achieve thin coating and high speeds. The rotating roll churns the Hot melt and forms bubbles. This results in spotted coating.
In both these processes the molten adhesive is exposed to the air and loses its heat so the hot melt adhesive changes its viscosity and this results in variation of coating thickness. Normally the ends of the coating roll lose heat compared to the centre of the roll hence the coats more grammage at the sides and less at the centre of the web. Sometimes the coating roller gives fumes due to high temperatures of the roller and thin layer of the adhesive on the roller hence the hot melt degrades due to high temperatures and loses its sticking property.
Additional Information:
Payment Terms : T/T
Delivery Time : 60 days
Features: Infinite lengths, Cost-effective, Easy-to-install, High adhesion capacity, Durability, Air permeability, Heat resistance, Low temperature, Aging resistanceGluing method:Coting in spots, strips, web, flat or edge coating.Applications:Big Area coating in footwear, Leather wares, Paper boxes, Decorations, Building materials, Sprorts instruments. Etc.
Additional Information:
Payment Terms : T/T
Packaging Details : Wooden Box
Delivery Time : 30 days