Write a Review
Our Products
We offer the best product range of Pressure Transducer, Tap Position Transducer, Frequency Transducer, Power Factor Transducer and DC Isolation Transducer.
The PT150-SD captures pressure measurements on hydraulic, pneumatic, air compressor, and process gas systems, as well as other industrial components. The PT150-SD features linearized current output (4 to 20 mA DC), a 1/4-inch NPT port connector with PS 1/4-inch (19 teeth per inch) adapter, and 1 percent full scale accuracy. The unit is made of corrosion-resistant stainless steel and requires a 9-30 VDC power source.
Features:
Compact size, NPT thread
Corrosion-resistant stainless steel
Linearized current output (4 to 20mA DC)
MECO Tap position Transducer takes various Resistance inputs and provides a Stable, Ripple-Free and Optically Isolated DC load independent output in the form of current or voltage. The output can be connected to Controllers, Data-Loggers, PLC's Analog/Digital Indicators, Recorders for display, analysis or control. They are ideal for SCADA, Energy Management, Telemetering for Remote, Local as well as Central Monitoring System.
Features:
Resistance Input:-
Resistance Input from Potentiometric Transformer
Tap Position upto 99 Transformer Taps (100 KOhms max.)
DC Output:-
Current : 0-1, 0-5, 0-10, 2-10, 0-20, 4-20mA
Voltage : 0-1, 0-5, 1-5, 0-10, 2-10V
MECO Frequency Transducer measures Power Frequency over a specified Frequency Range and converts it to an industry standard output signal which is directly proportional to the measured input. These Transducers provide an output which is load independent and isolated from the input. The output can be connected to Controllers, Data-Loggers, PLC's, Analog / Digital Indicators, Recorders for display, analysis or control. They are ideal for SCADA, Energy Management, Telemetering for Remote, Local as well as Central Monitoring Systems.
Features:
AC Input
Frequency : 45-55, 45-65, 55-65, 360-440Hz
Voltage : 63.5 / 110 / 230 / 440V (any one only)
DC Output
Current : 0-1, 0-5, 0-10, 2-10, 0-20, 4-20mA
Voltage : 0-1, 0-5, 1-5, 0-10, 2-10V
MECO AC Power Factor Transducers measure the power Factor in 1 Phase and 3 Phase electrical systems. The resulting output signal is directly proportional to the system power factor. These Transducers provide an output which is load independent and isolated from the input. The output can be connected to Controllers, Data-Loggers, PLC's Analog/Digital Indicators, Recorders for display, analysis or control. They are ideal for SCADA, Energy Management, Telemetering for Remote, Local as well as Central Monitoring System.
Features:
AC Input
Voltage : 63.5 / 110 / 230 / 440V (any one only)
Current : 1A / 5A (any one only)
DC Output
Current : 0-1, 0-5, 0-10, 2-10, 0-20, 4-20mA
Voltage : 0-1, 0-5, 1-5, 0-10, 2-10V
MECO DC Isolation Transducer takes various DC Voltage or DC Current signal inputs and provides a Stable, Ripple - Free and Optically Isolated DC load independent output in the form of current or voltage. The output can be connected to Controllers, Data-Loggers, PLC's Analog/Digital Indicators, Recorders for display, analysis or control. They are ideal for SCADA, Energy Management, Telemetering for Remote, Local as well as Central Monitoring System. Model DTI -RRL has LED indication at Power ON condition.
Features:
DC Input
Voltage : 0-100mV, 0-1, 0-5, 1-5, 0-10, 2-10, 0-1000V DC
Current : 4-20, 2-10, 1-5, 0-1, 0-10, 0-16, 0-20mA DC
DC Output
Current : 0-1, 0-5, 0-10, 0-20, 2-10, 4-20mA DC
Voltage : 0-1, 0-5, 1-5, 0-10, 2-10V DC
MECO AC Current Transducers measure AC Current and converts it to an industry standard output signal which is directly proportional to the measured input. These Transducers provide an output which is load independent and isolated from the input. The output can be connected to Controllers, Data-Loggers, PLC's, Analog / Digital Indicators, Recorders for display, analysis or control. They are ideal for SCADA, Energy Management, Telemetering for Remote, Local as well as Central Monitoring Systems.
Features:
AC Input
0-5A (Direct), 0 - 1A (Direct), CTR/5A, CTR/1A
DC Output
Current (mA): 0-1, 0-5, 0-10, 2-10, 0-20, 4-20mA
Voltage (V) : 0-1V, 0-5V, 1-5V, 0-10V, 2-10V
MECO AC Voltage Transducer measures AC Voltage and converts it to an industry standard output signal which is directly proportional to the measured input. These Transducers provide an output which is load independent and isolated from the input. The output can be connected to Controllers, Data-Loggers, PLC's, Analog / Digital Indicators, Recorders for display, analysis or control. They are ideal for SCADA, Energy Management, Telemetering for Remote, Local as well as Central Monitoring Systems.
Features:
AC Input
063.5, 0-110V, 0-230V, 0-300V, 0-440V, 0-500V
DC Output
Current (mA): 0-1, 0-5, 0-10, 2-10, 0-20, 4-20mA
Voltage (V) : 0-1V, 0-5V, 1-5V, 0-10V, 2-10V
Vikas Instruments (Vikas Instruments)
32 Ezra Street, Room No. 259, Bara Bazar, Kolkata, West Bengal, India
Share us via
