We have cemented our presence in the market by offering high quality lot that is prepared using the best grade material and modern work methodologies. Also, the material is sourced from the genuine vendors only. Our entire range of products is produced as per international quality standards. Therefore, they are dependable and worth the price.

Moisture the Foe of packed materialsA packed container (size may vary from tiny to very large) is a closed system having unique climate inside. It differs from a store or a warehouse in variable temperatures, usually much greater. It’s temperature ranges from subzero to over 50° Celsius during the transit.

The main fact is that warm air can hold more moisture than cold air. That means if warm air is cooled, it becomes more humid i.e. humidity increases. If it is cooled enough (by environment/climate or artificially), part of the moisture condenses and this is known as “Container Rain”. That is the same phenomenon that causes dew in the grass blade or fog on a cool day.

 This is enough to cause problems. At other times it condenses on the cargo, on the inside of the pallet wrap, also known as “Cargo Sweat”, which is usually even more damaging. Even without any condensation, elevated humidity over a period of time is sufficient to cause damage. Many metals will corrode or discolor at a rather modest level of humidity of 60% to 70%. At higher levels of humidity, above 80% molds can grow, labels peel and corrugated boxes start to soften.

It is important to realize that the humidity of the air changes only as a result of the change in temperature.

In a container warm dry air can absorb a lot of moisture. Warm moist air from the outside can also enter into the container through “Container Breathing”. When the container cools down, the risk for moisture damage increases.

But It is also risky when different parts of a container are at different temperatures. When warm air moves into a colder part it becomes humid and perhaps even condenses moisture. Tons of moisture can be redistributed within a container during a transit. Strange patterns of damage may arise, such as mold only in certain parts of the cargo.

Packed DesiccantsDesiccants prevents these moisture related problems before they begin, Packed Desiccants creates a protective shield of dry air within any enclosed storage area.
These desiccants bags are simply flexible "containers" of different adsorbents. The sachet is heat-sealed or stitched. It is made form non-woven cloth, cotton fabric cloth, Tyvek. The water molecules can pass through the material and be adsorbed by desiccants. We produce a range of standard size sachets. These Desiccants include (Clay, Activated Carbon, Zeolite, Molecular Sieve, Silica Gel Non Indicating/Indicating ) In the last case, the colours of the gels are visible through the sachets non- woven cloth or cotton fabric clot. Self-indicating silica gel size chosen. Or in case where an item is frequently inspected and the sachet can be replaced if it has become saturated and change colour. An active self indicating silica gel sachet give a clear sign that an item is safe from potentially expensive corrosion or stock sachets are as follow.

ApplicationAir and gases, drying of analytical samples, drying of solvents, drying of synthesis products, optical instruments and devices, camera or  telescope  case , protection of export consignments from moisture in salty atmosphere, drying and storage of flowers and seeds, Tool boxes, Storage containers, Safes and vaults, Silver drawer, Military instruments, Circuit Boards, Documents, Instruments, Photos, Photographic equipment and film, Firearms, Optical devices Foodstuffs, Batteries, Stored vehicles, Collectibles (stamps, coins, etc.), Electronics & Computer, Metal and machine parts, Industrial equipment, tool box, display case shipping container, locker, metal rust corrosion, medicine, pharmaceuticals, antique pieces in museums, electrical, food, textile, diagnostics kit, whatever humidity  trapped within enclosed spectrums into almost imperceptible condensation which causes irreparable damage.

Availability
These are available in various sizes and weights : 0.5 gm, 1 gm, 2 gm, 5 gm, 10 gm, 20 gm, 25 gm, 50 gm, 100 gm, 250 gm, 500 gm, 1 kg(with hanger) & Custom Made

By making use of streamlined packing system, we become capable of meeting the bulk and customized packing requirements of the clients. Moreover, we ensure complete safety of the orders. Maintaining the set industrial standards, we make sure that the range is as per the requirements.

Silica Gel is chemically non-deliquescent, dimensionally stable, highly porous, granular, amorphous, non toxic, non corrosive & highest capacity adsorbent available today.

Typical Chemical Formula : SiO₂ nH₂O

Applications :Silica Gel is commonly used for the following applications :

• Drying and cleaning of air and gases, drying of analytical samples, drying of solvents, drying of synthesis products, optical instruments and devices, protection of export consignments from moisture in salty atmosphere, drying and storage of flowers and seeds, Tool boxes, Storage containers, Safes and vaults, Silver drawer, Military instruments, Circuit Boards, Documents, Instruments, Photos, Photographic equipment and film, Firearms, Optical devices Foodstuffs, Batteries, Stored vehicles,
• Collectibles (stamps, coins, etc.), Electronics  & Computer, Metal and machine parts, Industrial equipment, Pharmaceuticals and vitamins, Leather products, Seeds, Jewellery, Medical equipment, Pet foods etc

Type :

• Standard Grade
• Silica Gel is also available in Beads / Balls form.

Regeneration : Silica Gel can be regenerated by evacuating or purging, usually at elevated temperatures. The purge gas temperature must be sufficiently high to bring the Silica Gel to a level of 150^oC - 160^oC, but not exceeding 2500C. Higher temperatures may cause physical degradation of the Silica Gel structure. At this stage it loses all the water of combination and consequently loses all the properties of adsorption once and for all. The degree of regeneration depends on the temperature, pressure and humidity of purge gas, and is a strong factor in affecting product purity.

Shipping Information : Silica Gel is available in 25 Kg HDPE Bags with inner Liner (Polyethylene bags) for Extra Protection.

Our team members and quality auditors keep regular checks on the quality of products and thus, even the raw material used is tested under vigil supervision to ensure better quality products. We are backed by a well-structured and capacious storehouse that assists us in furnishing urgent and quick requirements of the clients. Moreover, we ensure complete safety of the stored items.

Activated Alumina are physically and chemically stable forms of highly porous Aluminium Oxide. This porosity and large surface areas makes them an excellent adsorbents, catalysts and catalyst support. Activated Alumina is chemically inert to the most of gases and liquids.

Typical Chemical Formula : Al₂O₃ nH₂O

Applications :

• Gas Dehydration : Acetylene, Air, Ammonia, Argon, Carbon Dioxide, Ethane, Helium, Hydrogen, Natural Gas, Nitrogen, Propane, Saturated and Unsaturated Hydrocarbon mixtures of various molecular weights. For drying compressed air (instrument air)/gases and high pressure air feed to oxygen plant. For removal of oil vapour from compressed air/ gases
• Liquid Dehydration : Benzene, Butane, Butene, Bromine Chloride, Carbon Tetrachloride, Heptane, Hexane, HF Alkylation Fed, Napthas, Pentane, Propane, Propylene, Refrigerants, Transformer Oils.

Features : Our Activated Alumina Balls are low dusting, high capacity desiccant specially for use in package dryers. It work well in heatless air dryers because of its ease of desorption, high resistance to attrition and high crushing strength & has excellent thermal stability.

Type

• Standard Grade
• Activated Alumina Fluoride Remover & Arsenic Remover Grade is also available in granules & powder form.

Regeneration : Activated Alumina can be regenerated by elevated temperatures. The purge gas temperature must be at a level of 140^oC to 200^oC, thus Less energy is required for regeneration

Shelf Life : Activated Alumina has indefinite storage life if properly stored in dry covered place. Desiccant service life depends on the composition of the stream to be dehydrated, the system and the operating conditions.

Shipping Information : Activated Alumina Purification Grade is available in 50/170 Kg Air Tight Steel Drum Sealed and 50 Kg HDPE with inner Liner (Polyethylene bags) for Extra Protection.

Acquiring our premium and high-grade range of product is hassle free as our organization is located in Faridabad(India), which is easily accessible by road, rail, and air. We have hired a team of professional warehousing personnel who takes care of the entire lot and keep it protected. Our unit is installed with all necessary amenities required for safe storage.

Wide distribution network, exceptional connectivity, reliable transportation facilities are some of the attributes that help us in delivering the goods on time. We have adopted modern work methods that aid us completely in maintaining records and give us alerts time-to-time when any products goes short in the shelf.

 

Shipping Information : Packing available in 40 Kg Air Tight Plastic Drums