Other Products / Services #2816385

Tube Settler Media that we offer has high settling surface area whilst maintaining a small structure. It has a chevron shaped self-supporting structure in a tubular form with six sides. Tube Settler Media finds wide usage in water treatment, primary and secondary clarifiers in waste water treatment. We are one of the pioneering Manufacturers and Suppliers of Tube Settler Media from Delhi, India.

Tube Settler Systems for ClarificationTube settlers and parallel plates increase the settling capacity of circular clarifiers and/or rectangular sedimentation basins by reducing the vertical distance a floc particle must settle before agglomerating to form larger particles. Tube settlers 60 and adjacent to each other, which combine to form an increased effective setting area. This provides for a particle settling depth of a conventional clarifier, reducing settling times. Tube settlers capture the settleable fine floc that escapes the clarification zone beneath the tube settlers and allows the larger floc to travel to the tank bottom in a more settleable form. The tube settler’s channel collects solids into a compact mass which promotes the solids to slide down the tube channel.

Where can we use Tube Set Tube SettlerResidential and industrial waste water treatment plants, Potable water treatment plants, Oil separators, In rectangular or circular section reinforced concrete pools or sheet construction tanks, Tube Settler Lamella can be used, Shortly in all treatment plants where a good settling efficiency is expected. For some waste waters, a settling system using TUBE SET can become a stand-alone solution. Water parameters can be reduced to required criteria without needing to a chemical dosing, fast or slow mixing.

Advantages :

• Increase Capacity of Clarifier
• Enhance Particle agglomeration & Growth
• Enhance Suspended Solids Concentration
• Installation is Fast & Easy

Technical Specifications :

• Plain Settling Area of Media : 60o Slope – 11.0 m²/m³, 55o Slope – 13.0 m²/m³
• Cross Sectional Area : 120 mm x 44 mm
• Shape : Hexagonal Chevron
• Hydraulic Radius : 1.5 cm
• MOC of Media : PVC
• Thickness : 1.1 mm (+/- 0.1 mm)
• Filling Arrangement : Tongue & Groove
• Maximum Cont. Op. Temp :  55^oC
• Color : Black
• Distance Between Tubes : Horizontal - 120 mm & Vertical – 44 mm
• Separator Height : 500 mm – 5.5 m² Settling Area / m², 750 mm – 8.25 m² Settling Area / m², 1000 mm – 11.0 m² Settling Area / m²

Features :

• Increase Capacity of Clarifier
• Enhance Particle agglomeration & Growth
• Enhance Suspended Solids Concentration
• Installation is Fast & Easy

Belt Filter Press finds extensive usage in sludge dewatering prior to drying or disposal. It is commonly installed in waste water treatment plants, water treatment plants, food and dairy industries, abattoirs and pulp and paper industries. The heavy duty design of our Belt Filter Press makes it a reliable and long lasting machine. We are counted among the top companies, which are involved in manufacturing and supplying Belt Filter Press from Delhi, India.

Features :

• Note : We can also provide Plate Press
• Centrifuge as per the specific requirement
• Very low power consumption.
• Low polymer usage.
• Long bearing life.
• Consistent cake solids.
• Automatic running.
• Full enclosure option for odour prevention.
• Continuous De-watering Operation

Advantages :

• Low ‘whole-life’ costs.
• Process reliability
• Process compliance
• Plant reliability
• Minimal operator input
• Outdoor operation
• Proven cost effective de-watering system

Applications :

• Sewage treatment plant
• Water treatment plant
• Chemical Industries
• Pharmaceutical Industries
• Mineral Industries
• Paper Industries
• Food Industries and many more

The manufacturing of our Clarifier Scraper is done in accordance with the set industry norms and guidelines, utilizing the finest raw materials and modern machines. Our Clarifier Scraper is known for its sturdy construction, finer finish and resistance to high temperature and pressure. It offers impeccable performance and a longer functional life. To ensure defect free delivery of our Clarifier Scraper at the customers’ end, it is stringently checked on well-defined parameters of quality set by the industry.

Advantages :

• Lower installed cost.
• Easily installed indoors
• Minimal start-up / re-start time
• Lower maintenance costs.
• Occupies less floor space.
• Minimal field labor required to install.
• Relief from the frequent maintenance of
• chocking bottom sludge pipe.
• No separate buying and installing of sludge recirculation pumps.
• No special construction R.C.C. dry sump for pump.

Clariflocculator :

• Clariflocculator are generally used for chemical primary treatment for effluent. Instead of separate flocculation & clarification, clariflocculators are generally used. This results into economical and faster installation of primary treatment.
• Clariflocculators are having high torque centre drive with sludge arm device. We are the only manufacturers to provide this feature as standard. main feature of clariflocculator, unlike other is, concentric paddle type flocculator mechanism which creates the flocs throughout the flocclation zone.

Roots Blower finds extensive usage in irrigation and domestic purposes and is appreciated for its outstanding performance. The name of our company surfaces prominently among the reputed Manufacturers and Suppliers of Roots Blower from Delhi, India. We use the highest grade raw material to manufacture Roots Blower by using cutting edge technologies. We maintain rigid standards of quality in accordance with well defined industry norms and offer Roots Blower in standard as well as bespoke specifications.

Advantages :

• High pumping speeds at low pressures
• Considerable reduction in pump
• Prevents back streaming of oil from rotary pump
• Boosts vacuum performance

Specifications:

• Order of high vacuum 
• 0.001 Torr

Water Softener makes hard water suitable for drinking purpose. The name of our company surfaces prominently among the trusted Manufacturers and Suppliers of Water Softener from Delhi, India. The Water Softener that we offer is manufactured using modern technology and is known for its highly advanced features.

Key Attributes :

• Fully automatic, microprocessor – controlled operation as opposed to tedious & time consuming manual regeneration process
• Automatic regeneration on a preset time
• Self operation without assistance of a technician
• Conversion of hard water into soft water by exchange of hard salts of Calcium and Magnesium ions with Sodium using the table salt
• Consists of LCD

Plate Filter Press finds wide usage in widely used in food oil fractionation processes and possesses a multiple plating system. We are enlisted among the renowned Manufacturers and Suppliers of Plate Filter Press from Delhi, India. We provide Plate Filter Press, side bar frame up to 1500 x 1500 plate size. Customers can avail Plate Filter Press from us at a very reasonable price.

Specifications :

• Feed pressures up to 16 bar
• Side bar presses - 16 bar inside pressure
• Twin cylinders electro hydraulic multiplate filter

Features :

• Long Working life due to excellent resistance at high temperature.
• Lightweight makes handling easier.
• Resistant to most acids, alkalis, chemicals and abrasion.
• Less cost of installation and maintenance.
• Easy to operate and maintenance.
• Long service life.
• Maximum filtration efficiency.

Filter Presses are available in various sizes :

• 305mm X 305mm
• 470mm X 470mm
• 760mm X 760mm
• 915mm X 915mm
• 1200mm X 1200mm
• 355mm X 355mm
• 610mm X 610mm
• 800mm X 800mm
• 1000mm X 1000mm
• 1500mm X 1500mm

Applications :

• ETP, STP, WTP, WWTP for various industries
• Petrochemical, oily slurries and paint sludge
• Chemical solid-liquid separation processes
• Corrosive, acidic, alkaline slurry filtration
• Metals, metal finishing, minerals
• Tanneries and textile waste
• Environmental Remediation
• Pre-filtration & Clarification

We are offering wide range of Aerators available in a variety of designs, capacity and dimensions. We are one of the well-known Manufacturers and Suppliers of Aerators. Made from superior-grade raw materials, our Aerators are robust, lustrous, excellently finished and durable. Buyers can get Aerators from us at market leading prices and place bulk orders. We offer customized Aerators as well.

Highlights :

• Aeration is the process of bringing water and air into close contact in order to remove dissolved gases, such as carbon dioxide, and to oxidize dissolved metals such as iron.
• It can also be used to remove volatile organic chemicals (VOC) in the water.
• Aeration is often the first major process at the treatment plant. During aeration, constituents are removed or modified before they can interfere with the treatment processes.
• Aeration is used to treat tastes and odors, to help remove minerals such as iron and manganese from water, and to remove carbon dioxide from the water.
• Aeration removes or modifies the constituents of water using two methods - scrubbing action and oxidation. Scrubbing action is caused by turbulence, which results when the water and air mix together.
• The scrubbing action physically removes gases from solution in the water, allowing them to escape into the surrounding air.
• In the picture above, carbon dioxide and hydrogen sulfide are shown being removed by scrubbing action. Scrubbing action will remove tastes and odors from water if the problem is caused by relatively volatile gases and organic compounds.
• Oxidation is the other process through which aeration purifies water.
• Oxidation is the addition of oxygen, the removal of hydrogen, or the removal of electrons from an element or compound.
• When air is mixed with water, some impurities in the water, such as iron and manganese, become oxidized.
• Once oxidized, these chemicals fall out of solution and become suspended in the water.
• The suspended material can then be removed later in the treatment process through filtration.

Open Channel Flow Meter are used to measure flow in Open Channels, wires, Canals, etc and any such flow which is not flowing from enclosed pipes. The W2P make Open Channel Flow Meter, called Opflomax-u, can measure Uniform Flow in normal depth. The meter offers no resistance to flow, hence the flow can be measured without obstructing the channel or flow. The measurement is independent of viscosity, density &temperature of the flowing media. The measurement is not affected by solid impurities or any such floating impurities which make our Flow Meter a true Volumetric Flow Meter. The measurement is carried out with non- contact type sensors and they give 4-20mAoutput corresponding to the flow rate.

Principal Advantages :

• Simple to Install and easy to maintain.
• Compatible with all corrosive or non-corrosive liquids.
• No additional pressure drop across the channel.
• Higher ratio of return on investment.
• Measurement is Independent of Density, Temperature, Solid-impurities & conductivity variations.
• Economical.
• Field programmable Output.
• Compact Size.
• Automatic temperature compensation.

Centrifuge Machine is designed for separating blood and blood components from whole blood like platelet, plasma, RBC and Cryoprecipitate. We make available Centrifuge Machine that is ideal for blood banks and hospitals. Our Centrifuge Machine is widely demanded by pharmaceutical industry, research centres, vaccine manufacturing industry and universities. We are a reputed Manufacturer and Supplier of Centrifuge Machine from Delhi, India. It is provided with stainless steel inner chamber and effectively insulated to provide sufficient cooling of the chamber. Our Centrifuge Machine comprises of CFC free refrigeration system with pre-cooling facility, maintenance free brushless induction motor with low level of vibration and noise with smooth acceleration and deceleration. It has electronic motorized door lock and facility to open in case of power failure, RCF, acceleration and deceleration time can be set as per user requirement. Imbalance cut off, safe door open and mechanical lid lock is provided for increased safety.

Salient Attributes :

• Advanced user friendly micro-controller
• Menu driven programmes
• In-built pre-cooling programmes
• Facility to set and display of RCF
• Display of set values and process values
• User friendly LED and LCD display
• Maintenance free brushless induction motor
• Variable speed drive
• Motorized door lock for better safety
• Minimum acceleration time

Top Discharge Centrifuge :The three point suspended - manual top discharge- MTD model is an universal centrifuge for all application of solidliquid separation by filtration. Offered in a variety of materials of construction like-austenitic steels, PVDF coated-mild steels etc. They are manufactured with the best technology in the field and gives long trouble free operational lite. These are offered in various models and known as Chemical Centrifuge & Vertical Centrifuge.

Top Driven Bottom Discharge Centrifuge

• Top driven bottom discharge for uses in Dexroth plant in starch unit.
• Top driven bottom discharge centrifuge for vertical high speed in basket.
• Scrapper unit & Brake arraignment with nuemuntic operated.
• Control panel in TDB machine.

Bottom Discharge Centrifuge :

• Inverter drives.
• Fully Auto-PLC Control in GMP-Explosin / Flameproof execution.
• Full basket width? Two motion scrapper.

4 Point Top Discharge Centrifuge :

• Bottom driven Manual top discharge.
• Fabricated outer body with Interlock safety cover.
• Dynamically balanced SS 304 / 316 inner basket.
• Bearing housing from graded C.I. with SS lining.
• Manual band brake.
• Main shaft - En24, hardened and ground.

A clarifier is a device which clarifies Waste Water through the process of settling of heavy particles of sludge (impurities) as well as suspended matter in water. Sludge and suspended impurities being heavier settle at the bottom of the clarifier tank. A scraper blade rotates at the bottom of the conical bottom tank. This scraps the sludge settled on the slope of the conical bottom. The blades through their gradual sweeping action bring down the sludge to the centre of the clarifier tank, from where it is pumped out. Thus sludge and sediment material is continuously removed from the bottom of the clarifier tank. Some times in specific cases a scum removal mechanism is also provided to skim off the oil floating at the top of the clarifier tank.

Advantages :

• Lower installed cost.
• Easily installed indoors
• Minimal start-up / re-start time
• Lower maintenance costs.
• Occupies less floor space.
• Minimal field labor required to install.
• Relief from the frequent maintenance of chocking bottom sludge pipe.
• No separate buying and installing of sludge recirculation pumps.
• No special construction R.C.C. dry sump for pump.

Clariflocculator :Clariflocculator are generally used for chemical primary treatment for effluent. Instead of separate flocculation & clarification, clariflocculators are generally used. This results into economical and faster installation of primary treatment. Clariflocculators are having high torque centre drive with sludge arm device. We are the only manufacturers to provide this feature as standard. main feature of clariflocculator, unlike other is, concentric paddle type flocculator mechanism which creates the flocs throughout the flocclation zone.

Pressure Sand Filter is widely used for water filtration in various industries. The Pressure Sand Filter that we offer by us is manufactured using quality approved raw material and latest technology in accordance with set industry standards. Provided Pressure Sand Filter is strictly examined by our quality controllers to provide a defect free range at the customers’ end. Our Pressure Sand Filter is known for its rigged construction, easy installation and trouble-free performance.

We are one of the leading Manufacturers & Suppliers of a comprehensive assortment of Agitators. Designed and fabricated using the latest CAD/ CAM technologies and premium raw materials, our entire range of Agitators is reliable and highly efficient. Our team of experienced engineers enables us to construct high performance Agitators that are easy to assemble, commission, operate and manage.

Highlights :

• Owing to our advance facilities, W2P is able to manufacture a superior quality range of industrial Mixers that helps in mixing, homogenizing, gas dispersion and gentle stirring of low viscous & high viscous liquids.
• These precision designed and engineered agitators are extensively used basically in chemical, polymer, paint, chemical labs, pharma, construction chemicals, food, mineral industries etc.

Salient Features :

• High Efficiency hydrofoil impellers to ensure better flow / mixing with minimum power consumption as that of traditional impellers.
• Wide spanning range of impellers enabling to select the optimum element for each individual application.
• Sweep Dia 0.5 Mtr. to 3.5 Mtr.

Vertical Standard Mixers :

• The W2P-SM line, Standard Mixers, is designed for economical mixing solutions, available with short deliveries.
• It has a broad range of applications, including water treatment, fine chemicals and end-products industries.
• Open and Sealed tank up to 250 m . 3

Anchor type Agitator :

• W2P manufactures specially designed anchor type agitators.
• These Agitator are an important component for any reaction vessel. These are generally slow speed type of agitator but we are also capable to provide these in customized specifications to our clients.

Paddle type Agitator :

• The AGI-MD line, including three standard mixers, is designed for economical mixing solutions, available with short deliveries. It has a broad range of applications, including water treatment, fine chemicals and endproducts industries.
• Open and Sealed tank up to 250 m .

Applications :

• Chemical Industry
• Food Industry
• Refinery
• Paper Industry
• Distillery
• Soap Industry
• Rubber Industry
• Textile Industry
• Water Treatment
• Sewage Treatment

Based on the principle of sedimentation, the Decanter Centrifuge Machine uses the force developed under fast rotation of a helical screw conveyor which separates the liquid from the solid fraction at a slightly higher or lower speed than the bowl.Often the solids are too fine to be dewatered satisfactorily in the filtering centrifuges. They can be separated in solid bowl centrifuges provided their sedimentation speed in the mother liquid is sufficient. The sinking settling speed is determined by Particle size, Particle shape and difference in density between solids and liquids as well as their viscosity. In Decanter Centrifuges the cleaning of liquid takes place in cylindrical part where as dewatering of solids by compression of the filter cake takes place in conical part of the bowl. The geometry of the bowl, relation with length and diameter to be adapted to suit the application.The system is continuous, compact and enclosed while offering versatility, high performance, and low maintenance.The Decanters / Solid Bowl Centrifuges are used for clarification (liquid / solid separations), dewatering and classification duties in various process industries.

Salient Feature :

• Co-Current design
• Simple, rugged construction
• Tow - three-phase separation process
• Rotor comprising screw conveyor inside conical/cyinderical bowl
• Screw conveyor (single flight or multiple flights), with or without hard surfacing
• Conveyor and bowl in various stainless steel : SS 304 , SS 316/316 L
• Solids discharge through collecting channel and hard-surfaced scrapers
• Wear protection of conveyor flights in tungsten carbide
• Wear protection (interchange able ) of conveyor systems Drive by electric motor and V-belt with gear box for high strength and reliability
• Oil lubrication for gear box and greasing for bearings
• Overload protection device
• Fixed differential speed variation
• War protection including inter changeable tungsten carbide tiles
• Automatic differential speed variation on request
• Vibration dampers

Operation System :

• Separation takes place in Horizontal conical / cylindrical bowl with screw conveyor.
• The slurry in feed into the bowl through a staationery inlet tube and accelerated by specially
• design inlet distributor.
• Centrifugal force leads to instant sedimentations of the solids on the wall of bowl.
• The conveyor , rotating in the same direction as with differential speed, conveys the solids
• to conical end. The solids are lifted clear of the liquid and centrifugally dewatered before being
• discharged into the collecting channel.
• The clarified liquid flows into the housing through opening in cylindrical end of the bowl.

Typical Applications :

• Treatment and disposal processes of sludge form municipal and industrial waste water
• Drying of animal slurry
• Inorganic products aluminum hydroxide, barium sulphate, lead oxide, chromium oxide ferrous hydroxide, magnesium hydroxide, titanium dioxide, zinc sulphate, etc.
• Organic products carboxymet hylcellulose, caprolactam, dimethylterephthalate, terephthalic acid, phthalic acid, etc.
• Plastics carboxymethycellulose, caprolactam, dimethylterphthalate, terephathalic acid phthalic acid, etc.
• Silicates asbstos , clay, etc.
• Cellulose de-inking flotation concentrate.
• Foodstuffs fishmeal, casein, whey, etc.

UV Disinfection System that we offer is manufactured using stainless steel 304, 316, 316 L. The units of our UV Disinfection System are designed so perfectly to get maximum retention time and turbulence of water for better results. The Radiation chamber of our UV Disinfection System is mirror polished from the inside and outside thus reflecting max and amount of radiation. Both the ends of this system are flanged for easy operation, maintenance and servicing. It consists of quartz jackets and each quartz jacket is provided with a specially designed wiper assembly for removing any particles that get settled on the Quartz tube. The system is completely sealed to avoid any harmful effects from U.V. radiation. The Power Panel of UV Disinfection System is specially designed to withstand voltage fluctuation up to 5 %+. All the U.V. Cables are protected with spiral shield. It is provided with an alarm system to give signal in case of any lamp failure. Customers can avail this system from us in both standard and customized forms.

Advantages :

• UV disinfection is effective at inactivating most viruses, spores and cysts.
• UV disinfection is a physical process rather that a chemical disinfectant, which eliminates the need to generate, handle, transport, or store toxic/hazardous or corrosive chemicals.
• There is no residual effect that can be harmful to humans or aquatic life.
• UV disinfection has a shorter contact time when compared with other disinfectants (approximately 20 to 30 seconds with lowpressure lamps).
• UV disinfection equipment requires less space than other methods.

Oil Skimmer finds extensive usage in waste water treatment plant to remove excess oil from sewage and industrial effluent water. The Oil Skimmer that we offer is manufactured in accordance with our proprietary multi-type skimming process. Our Oil Skimmer is high in demand in the market due to its smooth functioning and longer functional life. We have emerged as a trusted Manufacturer and Supplier of Oil Skimmer from Delhi, India.

Working :

• The belt of the Oil Grabber attracts the oil and hydrocarbon components from the liquid surface.
• The contaminants are then scrapped off the sides of the belt and easily discharged.
• The skimmer removes oil up to 50 to 1000 liters/hr depending on the capacity of the skimmer and nature of the effluent.
• It provides optimal operation even in fluctuating depths.

Features / Advantages :

• Helps maintain requirement of water discharge as per Govt.
• Pollution Control Norms.
• Reduces Oil content less than 10 ppm in water / Effluent /
• CETP final discharge.
• Greatly reduces oil disposal cost and makes reuse of recovered oil for general lubrication purposes / Boiler Fuel / companies reclaiming oil.
• It lifts and separates oil from pit with any draft without the use of Pumps.
• Negligible maintenance, minimal power and easy to operate.
• Unit efficiently operates in hazardous as well as in turbulence / fluctuating flow of liquid / effuent in drain.
• Easy to install, use and maintain without any extra cost & spares.
• Continuous operation of unit without any labor.

Applications :

• Refinery
• Heat Treating
• Parts Washers
• Hotel Industries
• Wastewater Sumps
• Steel Mills / Scale Pits
• Automobile Industries
• Food Processing Facilities
• Coolants and Cutting Fluids
• Recovery / Monitoring Wells
• Outdoor Ponds, Lakes, Basins, Etc.
• Parking Lots, Garages and Service Facilities

Water Treatment Agitator that we offer can be mounted on beams, flanged, channels, clamped etc. We are a trusted Manufacturer and Supplier of Water Treatment Agitator from Delhi, India. Our Water Treatment Agitator is highly appreciated by the customers due to its dimensional accuracy, durability, longer operational life and sturdy construction.

Key Attributes :

• Variety of impellers according to the application
• Tailor made agitators for every mixing solution
• Right angle, parallel shaft , gear reduced and direct drive units
• Variety of sealing options- gland, single mechanical seal, double mechanical seal, cartridge seal etc.

Tube Settler Systems for ClarificationTube settlers and parallel plates increase the settling capacity of circular clarifiers and/or rectangular sedimentation basins by reducing the vertical distance a floc particle must settle before agglomerating to form larger particles. Tube settlers 60 and adjacent to each other, which combine to form an increased effective setting area. This provides for a particle settling depth of a conventional clarifier, reducing settling times. Tube settlers capture the settleable fine floc that escapes the clarification zone beneath the tube settlers and allows the larger floc to travel to the tank bottom in a more settleable form. The tube settler’s channel collects solids into a compact mass which promotes the solids to slide down the tube channel.

Where can we use Tube Set Tube SettlerResidential and industrial waste water treatment plants, Potable water treatment plants, Oil separators, In rectangular or circular section reinforced concrete pools or sheet construction tanks, Tube Settler Lamella can be used, Shortly in all treatment plants where a good settling efficiency is expected. For some waste waters, a settling system using TUBE SET can become a stand-alone solution. Water parameters can be reduced to required criteria without needing to a chemical dosing, fast or slow mixing.